Linux Standard Base Core Specification for S390 3.1 Copyright © 2004, 2005 Free Standards Group Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1; with no Invariant Sections, with no Front-Cover Texts, and with no Back-Cover Texts. A copy of the license is included in the section entitled "GNU Free Documentation License". Portions of the text are copyrighted by the following parties: * The Regents of the University of California * Free Software Foundation * Ian F. Darwin * Paul Vixie * BSDI (now Wind River) * Andrew G Morgan * Jean-loup Gailly and Mark Adler * Massachusetts Institute of Technology These excerpts are being used in accordance with their respective licenses. Linux is a trademark of Linus Torvalds. UNIX a registered trademark of the Open Group in the United States and other countries. LSB is a trademark of the Free Standards Group in the USA and other countries. AMD is a trademark of Advanced Micro Devices, Inc. Intel and Itanium are registered trademarks and Intel386 is a trademarks of Intel Corporation. PowerPC and PowerPC Architecture are trademarks of the IBM Corporation. OpenGL is a registered trademark of Silicon Graphics, Inc. _________________________________________________________ Table of Contents Foreword Introduction I. Introductory Elements 1. Scope 1.1. General 1.2. Module Specific Scope 2. References 2.1. Normative References 2.2. Informative References/Bibliography 3. Requirements 3.1. Relevant Libraries 3.2. LSB Implementation Conformance 3.3. LSB Application Conformance 4. Definitions 5. Terminology 6. Documentation Conventions II. Executable and Linking Format (ELF) 7. Introduction 8. Low Level System Information 8.1. Machine Interface 8.2. Function Calling Sequence 8.3. Operating System Interface 8.4. Process Initialization 8.5. Coding Examples 8.6. Debug Information 9. Object Format 9.1. Introduction 9.2. ELF Header 9.3. Sections 9.4. Symbol Table 9.5. Relocation 10. Program Loading and Dynamic Linking 10.1. Introduction 10.2. Program Loading 10.3. Dynamic Linking III. Base Libraries 11. Libraries 11.1. Program Interpreter/Dynamic Linker 11.2. Interfaces for libc 11.3. Data Definitions for libc 11.4. Interfaces for libm 11.5. Data Definitions for libm 11.6. Interfaces for libpthread 11.7. Data Definitions for libpthread 11.8. Interfaces for libgcc_s 11.9. Data Definitions for libgcc_s 11.10. Interface Definitions for libgcc_s 11.11. Interfaces for libdl 11.12. Data Definitions for libdl 11.13. Interfaces for libcrypt IV. Utility Libraries 12. Libraries 12.1. Interfaces for libz 12.2. Data Definitions for libz 12.3. Interfaces for libncurses 12.4. Data Definitions for libncurses 12.5. Interfaces for libutil V. Package Format and Installation 13. Software Installation 13.1. Package Dependencies 13.2. Package Architecture Considerations A. Alphabetical Listing of Interfaces A.1. libgcc_s B. GNU Free Documentation License (Informative) B.1. PREAMBLE B.2. APPLICABILITY AND DEFINITIONS B.3. VERBATIM COPYING B.4. COPYING IN QUANTITY B.5. MODIFICATIONS B.6. COMBINING DOCUMENTS B.7. COLLECTIONS OF DOCUMENTS B.8. AGGREGATION WITH INDEPENDENT WORKS B.9. TRANSLATION B.10. TERMINATION B.11. FUTURE REVISIONS OF THIS LICENSE B.12. How to use this License for your documents List of Tables 2-1. Normative References 2-2. Other References 3-1. Standard Library Names 9-1. ELF Special Sections 9-2. Additional Special Sections 11-1. libc Definition 11-2. libc - RPC Function Interfaces 11-3. libc - System Calls Function Interfaces 11-4. libc - Standard I/O Function Interfaces 11-5. libc - Standard I/O Data Interfaces 11-6. libc - Signal Handling Function Interfaces 11-7. libc - Signal Handling Data Interfaces 11-8. libc - Localization Functions Function Interfaces 11-9. libc - Localization Functions Data Interfaces 11-10. libc - Socket Interface Function Interfaces 11-11. libc - Wide Characters Function Interfaces 11-12. libc - String Functions Function Interfaces 11-13. libc - IPC Functions Function Interfaces 11-14. libc - Regular Expressions Function Interfaces 11-15. libc - Character Type Functions Function Interfaces 11-16. libc - Time Manipulation Function Interfaces 11-17. libc - Time Manipulation Data Interfaces 11-18. libc - Terminal Interface Functions Function Interfaces 11-19. libc - System Database Interface Function Interfaces 11-20. libc - Language Support Function Interfaces 11-21. libc - Large File Support Function Interfaces 11-22. libc - Standard Library Function Interfaces 11-23. libc - Standard Library Data Interfaces 11-24. libm Definition 11-25. libm - Math Function Interfaces 11-26. libm - Math Data Interfaces 11-27. libpthread Definition 11-28. libpthread - Realtime Threads Function Interfaces 11-29. libpthread - Posix Threads Function Interfaces 11-30. libpthread - Thread aware versions of libc interfaces Function Interfaces 11-31. libgcc_s Definition 11-32. libgcc_s - Unwind Library Function Interfaces 11-33. libdl Definition 11-34. libdl - Dynamic Loader Function Interfaces 11-35. libcrypt Definition 11-36. libcrypt - Encryption Function Interfaces 12-1. libz Definition 12-2. libncurses Definition 12-3. libutil Definition 12-4. libutil - Utility Functions Function Interfaces A-1. libgcc_s Function Interfaces _________________________________________________________ Foreword This is version 3.1 of the Linux Standard Base Core Specification for S390. This specification is part of a family of specifications under the general title "Linux Standard Base". Developers of applications or implementations interested in using the LSB trademark should see the Free Standards Group Certification Policy for details. _________________________________________________________ Introduction The LSB defines a binary interface for application programs that are compiled and packaged for LSB-conforming implementations on many different hardware architectures. Since a binary specification shall include information specific to the computer processor architecture for which it is intended, it is not possible for a single document to specify the interface for all possible LSB-conforming implementations. Therefore, the LSB is a family of specifications, rather than a single one. This document should be used in conjunction with the documents it references. This document enumerates the system components it includes, but descriptions of those components may be included entirely or partly in this document, partly in other documents, or entirely in other reference documents. For example, the section that describes system service routines includes a list of the system routines supported in this interface, formal declarations of the data structures they use that are visible to applications, and a pointer to the underlying referenced specification for information about the syntax and semantics of each call. Only those routines not described in standards referenced by this document, or extensions to those standards, are described in the detail. Information referenced in this way is as much a part of this document as is the information explicitly included here. The specification carries a version number of either the form x.y or x.y.z. This version number carries the following meaning: * The first number (x) is the major version number. All versions with the same major version number should share binary compatibility. Any addition or deletion of a new library results in a new version number. Interfaces marked as deprecated may be removed from the specification at a major version change. * The second number (y) is the minor version number. Individual interfaces may be added if all certified implementations already had that (previously undocumented) interface. Interfaces may be marked as deprecated at a minor version change. Other minor changes may be permitted at the discretion of the LSB workgroup. * The third number (z), if present, is the editorial level. Only editorial changes should be included in such versions. Since this specification is a descriptive Application Binary Interface, and not a source level API specification, it is not possible to make a guarantee of 100% backward compatibility between major releases. However, it is the intent that those parts of the binary interface that are visible in the source level API will remain backward compatible from version to version, except where a feature marked as "Deprecated" in one release may be removed from a future release. Implementors are strongly encouraged to make use of symbol versioning to permit simultaneous support of applications conforming to different releases of this specification. I. Introductory Elements Table of Contents 1. Scope 1.1. General 1.2. Module Specific Scope 2. References 2.1. Normative References 2.2. Informative References/Bibliography 3. Requirements 3.1. Relevant Libraries 3.2. LSB Implementation Conformance 3.3. LSB Application Conformance 4. Definitions 5. Terminology 6. Documentation Conventions _________________________________________________________ Chapter 1. Scope 1.1. General The Linux Standard Base (LSB) defines a system interface for compiled applications and a minimal environment for support of installation scripts. Its purpose is to enable a uniform industry standard environment for high-volume applications conforming to the LSB. These specifications are composed of two basic parts: A common specification ("LSB-generic" or "generic LSB") describing those parts of the interface that remain constant across all implementations of the LSB, and an architecture-specific supplement ("LSB-arch" or "archLSB") describing the parts of the interface that vary by processor architecture. Together, the LSB-generic and the architecture-specific supplement for a single hardware architecture provide a complete interface specification for compiled application programs on systems that share a common hardware architecture. The LSB-generic document shall be used in conjunction with an architecture-specific supplement. Whenever a section of the LSB-generic specification shall be supplemented by architecture-specific information, the LSB-generic document includes a reference to the architecture supplement. Architecture supplements may also contain additional information that is not referenced in the LSB-generic document. The LSB contains both a set of Application Program Interfaces (APIs) and Application Binary Interfaces (ABIs). APIs may appear in the source code of portable applications, while the compiled binary of that application may use the larger set of ABIs. A conforming implementation shall provide all of the ABIs listed here. The compilation system may replace (e.g. by macro definition) certain APIs with calls to one or more of the underlying binary interfaces, and may insert calls to binary interfaces as needed. The LSB is primarily a binary interface definition. Not all of the source level APIs available to applications may be contained in this specification. _________________________________________________________ 1.2. Module Specific Scope This is the S390 architecture specific Core module of the Linux Standards Base (LSB). This module supplements the generic LSB Core module with those interfaces that differ between architectures. Interfaces described in this module are mandatory except where explicitly listed otherwise. Core interfaces may be supplemented by other modules; all modules are built upon the core. _________________________________________________________ Chapter 2. References 2.1. Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. Note: Where copies of a document are available on the World Wide Web, a Uniform Resource Locator (URL) is given for informative purposes only. This may point to a more recent copy of the referenced specification, or may be out of date. Reference copies of specifications at the revision level indicated may be found at the Free Standards Group's Reference Specifications site. Table 2-1. Normative References Name Title URL Enterprise Systems Architecture/390 Principles of Operation Enterprise Systems Architecture/390 Principles of Operation http://oss.software.ibm.com/linux390/documentation-2.2.shtml Filesystem Hierarchy Standard Filesystem Hierarchy Standard (FHS) 2.3 http://www.pathname.com/fhs/ IEC 60559/IEEE 754 Floating Point IEC 60559:1989 Binary floating-point arithmetic for microprocessor systems http://www.ieee.org/ ISO C (1999) ISO/IEC 9899: 1999, Programming Languages --C ISO POSIX (2003) ISO/IEC 9945-1:2003 Information technology -- Portable Operating System Interface (POSIX) -- Part 1: Base Definitions ISO/IEC 9945-2:2003 Information technology -- Portable Operating System Interface (POSIX) -- Part 2: System Interfaces ISO/IEC 9945-3:2003 Information technology -- Portable Operating System Interface (POSIX) -- Part 3: Shell and Utilities ISO/IEC 9945-4:2003 Information technology -- Portable Operating System Interface (POSIX) -- Part 4: Rationale Including Technical Cor. 1: 2004 http://www.unix.org/version3/ Large File Support Large File Support http://www.UNIX-systems.org/version2/whatsnew/lfs20mar.html LINUX for S/390 ELF Application Binary Interface Supplement LINUX for S/390 ELF Application Binary Interface Supplement http://oss.software.ibm.com/linux390/documentation-2.2.shtml SUSv2 CAE Specification, January 1997, System Interfaces and Headers (XSH),Issue 5 (ISBN: 1-85912-181-0, C606) http://www.opengroup.org/publications/catalog/un.htm SUSv2 Commands and Utilities The Single UNIX® Specification(SUS) Version 2, Commands and Utilities (XCU), Issue 5 (ISBN: 1-85912-191-8, C604) http://www.opengroup.org/publications/catalog/un.htm SVID Issue 3 American Telephone and Telegraph Company, System V Interface Definition, Issue 3 ; Morristown, NJ, UNIX Press, 1989.(ISBN 0201566524) SVID Issue 4 System V Interface Definition,Fourth Edition System V ABI System V Application Binary Interface, Edition 4.1 http://www.caldera.com/developers/devspecs/gabi41.pdf System V ABI Update System V Application Binary Interface - DRAFT - 17 December 2003 http://www.caldera.com/developers/gabi/2003-12-17/contents.htm l X/Open Curses CAE Specification, May 1996, X/Open Curses, Issue 4, Version 2 (ISBN: 1-85912-171-3, C610), plus Corrigendum U018 http://www.opengroup.org/publications/catalog/un.htm _________________________________________________________ 2.2. Informative References/Bibliography In addition, the specifications listed below provide essential background information to implementors of this specification. These references are included for information only. Table 2-2. Other References Name Title URL DWARF Debugging Information Format, Revision 2.0.0 DWARF Debugging Information Format, Revision 2.0.0 (July 27, 1993) http://refspecs.freestandards.org/dwarf/dwarf-2.0.0.pdf DWARF Debugging Information Format, Revision 3.0.0 (Draft) DWARF Debugging Information Format, Revision 3.0.0 (Draft) http://refspecs.freestandards.org/dwarf/ ISO/IEC TR14652 ISO/IEC Technical Report 14652:2002 Specification method for cultural conventions ITU-T V.42 International Telecommunication Union Recommendation V.42 (2002): Error-correcting procedures for DCEs using asynchronous-to-synchronous conversionITUV http://www.itu.int/rec/recommendation.asp?type=folders&lang=e& parent=T-REC-V.42 Li18nux Globalization Specification LI18NUX 2000 Globalization Specification, Version 1.0 with Amendment 4 http://www.li18nux.org/docs/html/LI18NUX-2000-amd4.htm Linux Allocated Device Registry LINUX ALLOCATED DEVICES http://www.lanana.org/docs/device-list/devices.txt PAM Open Software Foundation, Request For Comments: 86.0 , October 1995, V. Samar & R.Schemers (SunSoft) http://www.opengroup.org/tech/rfc/mirror-rfc/rfc86.0.txt RFC 1321: The MD5 Message-Digest Algorithm IETF RFC 1321: The MD5 Message-Digest Algorithm http://www.ietf.org/rfc/rfc1321.txt RFC 1831/1832 RPC & XDR IETF RFC 1831 & 1832 http://www.ietf.org/ RFC 1833: Binding Protocols for ONC RPC Version 2 IETF RFC 1833: Binding Protocols for ONC RPC Version 2 http://www.ietf.org/rfc/rfc1833.txt RFC 1950: ZLIB Compressed Data Format Specication IETF RFC 1950: ZLIB Compressed Data Format Specification http://www.ietf.org/rfc/rfc1950.txt RFC 1951: DEFLATE Compressed Data Format Specification IETF RFC 1951: DEFLATE Compressed Data Format Specification version 1.3 http://www.ietf.org/rfc/rfc1951.txt RFC 1952: GZIP File Format Specification IETF RFC 1952: GZIP file format specification version 4.3 http://www.ietf.org/rfc/rfc1952.txt RFC 2440: OpenPGP Message Format IETF RFC 2440: OpenPGP Message Format http://www.ietf.org/rfc/rfc2440.txt RFC 2821:Simple Mail Transfer Protocol IETF RFC 2821: Simple Mail Transfer Protocol http://www.ietf.org/rfc/rfc2821.txt RFC 2822:Internet Message Format IETF RFC 2822: Internet Message Format http://www.ietf.org/rfc/rfc2822.txt RFC 791:Internet Protocol IETF RFC 791: Internet Protocol Specification http://www.ietf.org/rfc/rfc791.txt RPM Package Format RPM Package Format V3.0 http://www.rpm.org/max-rpm/s1-rpm-file-format-rpm-file-format. html zlib Manual zlib 1.2 Manual http://www.gzip.org/zlib/ _________________________________________________________ Chapter 3. Requirements 3.1. Relevant Libraries The libraries listed in Table 3-1 shall be available on S390 Linux Standard Base systems, with the specified runtime names. These names override or supplement the names specified in the generic LSB specification. The specified program interpreter, referred to as proginterp in this table, shall be used to load the shared libraries specified by DT_NEEDED entries at run time. Table 3-1. Standard Library Names Library Runtime Name libm libm.so.6 libdl libdl.so.2 libcrypt libcrypt.so.1 libz libz.so.1 libncurses libncurses.so.5 libutil libutil.so.1 libc libc.so.6 libpthread libpthread.so.0 proginterp /lib/ld-lsb-s390.so.3 libgcc_s libgcc_s.so.1 These libraries will be in an implementation-defined directory which the dynamic linker shall search by default. _________________________________________________________ 3.2. LSB Implementation Conformance A conforming implementation is necessarily architecture specific, and must provide the interfaces specified by both the generic LSB Core specification and its relevant architecture specific supplement. Rationale: An implementation must provide at least the interfaces specified in these specifications. It may also provide additional interfaces. A conforming implementation shall satisfy the following requirements: * A processor architecture represents a family of related processors which may not have identical feature sets. The architecture specific supplement to this specification for a given target processor architecture describes a minimum acceptable processor. The implementation shall provide all features of this processor, whether in hardware or through emulation transparent to the application. * The implementation shall be capable of executing compiled applications having the format and using the system interfaces described in this document. * The implementation shall provide libraries containing the interfaces specified by this document, and shall provide a dynamic linking mechanism that allows these interfaces to be attached to applications at runtime. All the interfaces shall behave as specified in this document. * The map of virtual memory provided by the implementation shall conform to the requirements of this document. * The implementation's low-level behavior with respect to function call linkage, system traps, signals, and other such activities shall conform to the formats described in this document. * The implementation shall provide all of the mandatory interfaces in their entirety. * The implementation may provide one or more of the optional interfaces. Each optional interface that is provided shall be provided in its entirety. The product documentation shall state which optional interfaces are provided. * The implementation shall provide all files and utilities specified as part of this document in the format defined here and in other referenced documents. All commands and utilities shall behave as required by this document. The implementation shall also provide all mandatory components of an application's runtime environment that are included or referenced in this document. * The implementation, when provided with standard data formats and values at a named interface, shall provide the behavior defined for those values and data formats at that interface. However, a conforming implementation may consist of components which are separately packaged and/or sold. For example, a vendor of a conforming implementation might sell the hardware, operating system, and windowing system as separately packaged items. * The implementation may provide additional interfaces with different names. It may also provide additional behavior corresponding to data values outside the standard ranges, for standard named interfaces. _________________________________________________________ 3.3. LSB Application Conformance A conforming application is necessarily architecture specific, and must conform to both the generic LSB Core specification and its relevant architecture specific supplement. A conforming application shall satisfy the following requirements: * Its executable files shall be either shell scripts or object files in the format defined for the Object File Format system interface. * Its object files shall participate in dynamic linking as defined in the Program Loading and Linking System interface. * It shall employ only the instructions, traps, and other low-level facilities defined in the Low-Level System interface as being for use by applications. * If it requires any optional interface defined in this document in order to be installed or to execute successfully, the requirement for that optional interface shall be stated in the application's documentation. * It shall not use any interface or data format that is not required to be provided by a conforming implementation, unless: + If such an interface or data format is supplied by another application through direct invocation of that application during execution, that application shall be in turn an LSB conforming application. + The use of that interface or data format, as well as its source, shall be identified in the documentation of the application. * It shall not use any values for a named interface that are reserved for vendor extensions. A strictly conforming application shall not require or use any interface, facility, or implementation-defined extension that is not defined in this document in order to be installed or to execute successfully. _________________________________________________________ Chapter 4. Definitions For the purposes of this document, the following definitions, as specified in the ISO/IEC Directives, Part 2, 2001, 4th Edition, apply: can be able to; there is a possibility of; it is possible to cannot be unable to; there is no possibilty of; it is not possible to may is permitted; is allowed; is permissible need not it is not required that; no...is required shall is to; is required to; it is required that; has to; only...is permitted; it is necessary shall not is not allowed [permitted] [acceptable] [permissible]; is required to be not; is required that...be not; is not to be should it is recommended that; ought to should not it is not recommended that; ought not to _________________________________________________________ Chapter 5. Terminology For the purposes of this document, the following terms apply: archLSB The architectural part of the LSB Specification which describes the specific parts of the interface that are platform specific. The archLSB is complementary to the gLSB. Binary Standard The total set of interfaces that are available to be used in the compiled binary code of a conforming application. gLSB The common part of the LSB Specification that describes those parts of the interface that remain constant across all hardware implementations of the LSB. implementation-defined Describes a value or behavior that is not defined by this document but is selected by an implementor. The value or behavior may vary among implementations that conform to this document. An application should not rely on the existence of the value or behavior. An application that relies on such a value or behavior cannot be assured to be portable across conforming implementations. The implementor shall document such a value or behavior so that it can be used correctly by an application. Shell Script A file that is read by an interpreter (e.g., awk). The first line of the shell script includes a reference to its interpreter binary. Source Standard The set of interfaces that are available to be used in the source code of a conforming application. undefined Describes the nature of a value or behavior not defined by this document which results from use of an invalid program construct or invalid data input. The value or behavior may vary among implementations that conform to this document. An application should not rely on the existence or validity of the value or behavior. An application that relies on any particular value or behavior cannot be assured to be portable across conforming implementations. unspecified Describes the nature of a value or behavior not specified by this document which results from use of a valid program construct or valid data input. The value or behavior may vary among implementations that conform to this document. An application should not rely on the existence or validity of the value or behavior. An application that relies on any particular value or behavior cannot be assured to be portable across conforming implementations. Other terms and definitions used in this document shall have the same meaning as defined in Chapter 3 of the Base Definitions volume of ISO POSIX (2003). _________________________________________________________ Chapter 6. Documentation Conventions Throughout this document, the following typographic conventions are used: function() the name of a function command the name of a command or utility CONSTANT a constant value parameter a parameter variable a variable Throughout this specification, several tables of interfaces are presented. Each entry in these tables has the following format: name the name of the interface (symver) An optional symbol version identifier, if required. [refno] A reference number indexing the table of referenced specifications that follows this table. For example, forkpty(GLIBC_2.0) [SUSv3] refers to the interface named forkpty() with symbol version GLIBC_2.0 that is defined in the SUSv3 reference. Note: Symbol versions are defined in the architecture specific supplements only. II. Executable and Linking Format (ELF) Table of Contents 7. Introduction 8. Low Level System Information 8.1. Machine Interface 8.1.1. Processor Architecture 8.1.2. Data Representation 8.2. Function Calling Sequence 8.2.1. Registers 8.2.2. Stack Frame 8.2.3. Parameter Passing 8.2.4. Variable Argument Lists 8.2.5. Return Values 8.3. Operating System Interface 8.3.1. Virtual Address Space 8.3.2. Processor Execution Mode 8.3.3. Exception Interface 8.4. Process Initialization 8.4.1. Registers 8.4.2. Process Stack 8.5. Coding Examples 8.5.1. Code Model Overview 8.5.2. Function Prolog and Epilog 8.5.3. Data Objects 8.5.4. Function Calls 8.5.5. Branching 8.5.6. Dynamic Stack Space Allocation 8.6. Debug Information 9. Object Format 9.1. Introduction 9.2. ELF Header 9.2.1. Machine Information 9.3. Sections 9.3.1. Special Sections 9.3.2. Addition Special Sections 9.4. Symbol Table 9.5. Relocation 9.5.1. Relocation Types 10. Program Loading and Dynamic Linking 10.1. Introduction 10.2. Program Loading 10.3. Dynamic Linking 10.3.1. Dynamic Section 10.3.2. Global Offset Table 10.3.3. Shared Object Dependencies 10.3.4. Function Addresses 10.3.5. Procedure Linkage Table _________________________________________________________ Chapter 7. Introduction Executable and Linking Format (ELF) defines the object format for compiled applications. This specification supplements the information found in System V ABI Update and LINUX for S/390 ELF Application Binary Interface Supplement, and is intended to document additions made since the publication of that document. _________________________________________________________ Chapter 8. Low Level System Information 8.1. Machine Interface 8.1.1. Processor Architecture The ESA/390 Architecture is specified by the following documents * LINUX for S/390 ELF Application Binary Interface Supplement * Enterprise Systems Architecture/390 Principles of Operation Only the features of ESA/390 processor instruction set and the following optional instructions may be assumed to be present: * additional floating point facility * compare and move extended facility * immediate and relative instruction facility * string instruction facility * square-root facility An application should determine if any additional instruction set features are available before using those additional features. If a feature is not present, then a conforming application shall not use it. Conforming applications shall not invoke the implementations underlying system call interface directly. The interfaces in the implementation base libraries shall be used instead. Rationale: Implementation-supplied base libraries may use the system call interface but applications must not assume any particular operating system or kernel version is present. Applications conforming to this specification must provide feedback to the user if a feature that is required for correct execution of the application is not present. Applications conforming to this specification should attempt to execute in a diminished capacity if a required instruction set feature is not present. This specfication does not provide any performance guarantees of a conforming system. A system conforming to this specification may be implemented in either hardware or software. _________________________________________________________ 8.1.2. Data Representation LSB-conforming applications shall use the data representation as defined in Chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.1.2.1. Byte Ordering See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.1.2.2. Fundamental Types See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.1.2.3. Aggregates and Unions See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.1.2.4. Bit Fields See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.2. Function Calling Sequence LSB-conforming applications shall use the function calling sequence as defined in Chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.2.1. Registers See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.2.2. Stack Frame See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.2.3. Parameter Passing See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.2.4. Variable Argument Lists See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.2.5. Return Values See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.3. Operating System Interface LSB-conforming applications shall use the Operating System Interfaces as defined in Chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.3.1. Virtual Address Space See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.3.1.1. Page Size See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.3.1.2. Virtual Address Assignments See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.3.1.3. Managing the Process Stack See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.3.1.4. Coding Guidleines See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.3.2. Processor Execution Mode See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.3.3. Exception Interface See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.4. Process Initialization LSB-conforming applications shall use the Process Initialization as defined in Chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.4.1. Registers See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.4.2. Process Stack See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.5. Coding Examples LSB-conforming applications may implement fundamental operations using the Coding Examples as defined in Chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.5.1. Code Model Overview See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.5.2. Function Prolog and Epilog See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.5.3. Data Objects See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.5.4. Function Calls See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.5.5. Branching See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.5.6. Dynamic Stack Space Allocation See chapter 1 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 8.6. Debug Information The LSB does not currently specify the format of Debug information. _________________________________________________________ Chapter 9. Object Format 9.1. Introduction LSB-conforming implementations shall support an object file , called Executable and Linking Format (ELF) as defined by the System V ABI , System V ABI Update, LINUX for S/390 ELF Application Binary Interface Supplement and as supplemented by the This Specification and this document. _________________________________________________________ 9.2. ELF Header 9.2.1. Machine Information LSB-conforming applications shall use the Machine Information as defined in Chapter 2 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 9.3. Sections See chapter 2 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 9.3.1. Special Sections The following sections are defined in the LINUX for S/390 ELF Application Binary Interface Supplement. Table 9-1. ELF Special Sections Name Type Attributes .got SHT_PROGBITS SHF_ALLOC+SHF_WRITE .plt SHT_PROGBITS SHF_ALLOC+SHF_EXECINSTR .got This section holds the global offset table .plt This section holds the Procedure Linkage Table _________________________________________________________ 9.3.2. Addition Special Sections The following additional sections are defined here. Table 9-2. Additional Special Sections Name Type Attributes .rela.dyn SHT_RELA SHF_ALLOC .rela.plt SHT_RELA SHF_ALLOC .rela.dyn This section holds RELA type relocation information for all sections of a shared library except the PLT .rela.plt This section holds RELA type relocation information for the PLT section of a shared library or dynamically linked application _________________________________________________________ 9.4. Symbol Table LSB-conforming applications shall use the Symbol Table as defined in Chapter 2 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 9.5. Relocation LSB-conforming applications shall use Relocations as defined in Chapter 2 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 9.5.1. Relocation Types See chapter 2 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ Chapter 10. Program Loading and Dynamic Linking 10.1. Introduction LSB-conforming implementations shall support the object file information and system actions that create running programs as specified in the LINUX for S/390 ELF Application Binary Interface Supplement and as supplemented by the the generic LSB and this document. LSB-conforming implementations need not support tags related functionality. LSB-conforming applications must not rely on tags related funtionatliy. _________________________________________________________ 10.2. Program Loading See chapter 3 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 10.3. Dynamic Linking See chapter 3 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 10.3.1. Dynamic Section The following dynamic entries are defined in the LINUX for S/390 ELF Application Binary Interface Supplement. DT_JMPREL This entry is associated with a table of relocation entries for the procedure linkage table. This entry is mandatory both for executable and shared object files DT_PLTGOT This entry's d_ptr member gives the address of the first byte in the procedure linkage table _________________________________________________________ 10.3.2. Global Offset Table See chapter 3 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 10.3.3. Shared Object Dependencies See chapter 3 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 10.3.4. Function Addresses See chapter 3 of the LINUX for S/390 ELF Application Binary Interface Supplement. _________________________________________________________ 10.3.5. Procedure Linkage Table See chapter 3 of the LINUX for S/390 ELF Application Binary Interface Supplement. III. Base Libraries Table of Contents 11. Libraries 11.1. Program Interpreter/Dynamic Linker 11.2. Interfaces for libc 11.2.1. RPC 11.2.2. System Calls 11.2.3. Standard I/O 11.2.4. Signal Handling 11.2.5. Localization Functions 11.2.6. Socket Interface 11.2.7. Wide Characters 11.2.8. String Functions 11.2.9. IPC Functions 11.2.10. Regular Expressions 11.2.11. Character Type Functions 11.2.12. Time Manipulation 11.2.13. Terminal Interface Functions 11.2.14. System Database Interface 11.2.15. Language Support 11.2.16. Large File Support 11.2.17. Standard Library 11.3. Data Definitions for libc 11.3.1. arpa/inet.h 11.3.2. assert.h 11.3.3. ctype.h 11.3.4. dirent.h 11.3.5. err.h 11.3.6. errno.h 11.3.7. fcntl.h 11.3.8. fmtmsg.h 11.3.9. fnmatch.h 11.3.10. ftw.h 11.3.11. getopt.h 11.3.12. glob.h 11.3.13. grp.h 11.3.14. iconv.h 11.3.15. inttypes.h 11.3.16. langinfo.h 11.3.17. libgen.h 11.3.18. libintl.h 11.3.19. limits.h 11.3.20. locale.h 11.3.21. monetary.h 11.3.22. net/if.h 11.3.23. netdb.h 11.3.24. netinet/in.h 11.3.25. netinet/ip.h 11.3.26. netinet/tcp.h 11.3.27. netinet/udp.h 11.3.28. nl_types.h 11.3.29. poll.h 11.3.30. pty.h 11.3.31. pwd.h 11.3.32. regex.h 11.3.33. rpc/auth.h 11.3.34. rpc/clnt.h 11.3.35. rpc/pmap_clnt.h 11.3.36. rpc/rpc_msg.h 11.3.37. rpc/svc.h 11.3.38. rpc/types.h 11.3.39. rpc/xdr.h 11.3.40. sched.h 11.3.41. search.h 11.3.42. setjmp.h 11.3.43. signal.h 11.3.44. stddef.h 11.3.45. stdio.h 11.3.46. stdlib.h 11.3.47. string.h 11.3.48. sys/file.h 11.3.49. sys/ioctl.h 11.3.50. sys/ipc.h 11.3.51. sys/mman.h 11.3.52. sys/msg.h 11.3.53. sys/param.h 11.3.54. sys/poll.h 11.3.55. sys/resource.h 11.3.56. sys/sem.h 11.3.57. sys/shm.h 11.3.58. sys/socket.h 11.3.59. sys/stat.h 11.3.60. sys/statvfs.h 11.3.61. sys/time.h 11.3.62. sys/timeb.h 11.3.63. sys/times.h 11.3.64. sys/types.h 11.3.65. sys/uio.h 11.3.66. sys/un.h 11.3.67. sys/utsname.h 11.3.68. sys/wait.h 11.3.69. syslog.h 11.3.70. termios.h 11.3.71. time.h 11.3.72. ucontext.h 11.3.73. ulimit.h 11.3.74. unistd.h 11.3.75. utime.h 11.3.76. utmp.h 11.3.77. utmpx.h 11.3.78. wchar.h 11.3.79. wctype.h 11.3.80. wordexp.h 11.4. Interfaces for libm 11.4.1. Math 11.5. Data Definitions for libm 11.5.1. complex.h 11.5.2. fenv.h 11.5.3. math.h 11.6. Interfaces for libpthread 11.6.1. Realtime Threads 11.6.2. Advanced Realtime Threads 11.6.3. Posix Threads 11.6.4. Thread aware versions of libc interfaces 11.7. Data Definitions for libpthread 11.7.1. pthread.h 11.7.2. semaphore.h 11.8. Interfaces for libgcc_s 11.8.1. Unwind Library 11.9. Data Definitions for libgcc_s 11.9.1. unwind.h 11.10. Interface Definitions for libgcc_s _Unwind_DeleteException -- private C++ error handling method _Unwind_Find_FDE -- private C++ error handling method _Unwind_ForcedUnwind -- private C++ error handling method _Unwind_GetDataRelBase -- private IA64 C++ error handling method _Unwind_GetGR -- private C++ error handling method _Unwind_GetIP -- private C++ error handling method _Unwind_GetLanguageSpecificData -- private C++ error handling method _Unwind_GetRegionStart -- private C++ error handling method _Unwind_GetTextRelBase -- private IA64 C++ error handling method _Unwind_RaiseException -- private C++ error handling method _Unwind_Resume -- private C++ error handling method _Unwind_SetGR -- private C++ error handling method _Unwind_SetIP -- private C++ error handling method 11.11. Interfaces for libdl 11.11.1. Dynamic Loader 11.12. Data Definitions for libdl 11.12.1. dlfcn.h 11.13. Interfaces for libcrypt 11.13.1. Encryption _________________________________________________________ Chapter 11. Libraries An LSB-conforming implementation shall support base libraries which provide interfaces for accessing the operating system, processor and other hardware in the system. Only those interfaces that are unique to the S390 platform are defined here. This section should be used in conjunction with the corresponding section in the Linux Standard Base Specification. _________________________________________________________ 11.1. Program Interpreter/Dynamic Linker The Program Interpreter shall be /lib/ld-lsb-s390.so.3. _________________________________________________________ 11.2. Interfaces for libc Table 11-1 defines the library name and shared object name for the libc library Table 11-1. libc Definition Library: libc SONAME: libc.so.6 The behavior of the interfaces in this library is specified by the following specifications: [LFS] Large File Support [LSB] This Specification [SUSv2] SUSv2 [SUSv3] ISO POSIX (2003) [SVID.3] SVID Issue 3 [SVID.4] SVID Issue 4 _________________________________________________________ 11.2.1. RPC _________________________________________________________ 11.2.1.1. Interfaces for RPC An LSB conforming implementation shall provide the architecture specific functions for RPC specified in Table 11-2, with the full mandatory functionality as described in the referenced underlying specification. Table 11-2. libc - RPC Function Interfaces authnone_create(GLIBC_2.0) [SVID.4] clnt_create(GLIBC_2.0) [SVID.4] clnt_pcreateerror(GLIBC_2.0) [SVID.4] clnt_perrno(GLIBC_2.0) [SVID.4] clnt_perror(GLIBC_2.0) [SVID.4] clnt_spcreateerror(GLIBC_2.0) [SVID.4] clnt_sperrno(GLIBC_2.0) [SVID.4] clnt_sperror(GLIBC_2.0) [SVID.4] key_decryptsession(GLIBC_2.1) [SVID.3] pmap_getport(GLIBC_2.0) [LSB] pmap_set(GLIBC_2.0) [LSB] pmap_unset(GLIBC_2.0) [LSB] svc_getreqset(GLIBC_2.0) [SVID.3] svc_register(GLIBC_2.0) [LSB] svc_run(GLIBC_2.0) [LSB] svc_sendreply(GLIBC_2.0) [LSB] svcerr_auth(GLIBC_2.0) [SVID.3] svcerr_decode(GLIBC_2.0) [SVID.3] svcerr_noproc(GLIBC_2.0) [SVID.3] svcerr_noprog(GLIBC_2.0) [SVID.3] svcerr_progvers(GLIBC_2.0) [SVID.3] svcerr_systemerr(GLIBC_2.0) [SVID.3] svcerr_weakauth(GLIBC_2.0) [SVID.3] svctcp_create(GLIBC_2.0) [LSB] svcudp_create(GLIBC_2.0) [LSB] xdr_accepted_reply(GLIBC_2.0) [SVID.3] xdr_array(GLIBC_2.0) [SVID.3] xdr_bool(GLIBC_2.0) [SVID.3] xdr_bytes(GLIBC_2.0) [SVID.3] xdr_callhdr(GLIBC_2.0) [SVID.3] xdr_callmsg(GLIBC_2.0) [SVID.3] xdr_char(GLIBC_2.0) [SVID.3] xdr_double(GLIBC_2.0) [SVID.3] xdr_enum(GLIBC_2.0) [SVID.3] xdr_float(GLIBC_2.0) [SVID.3] xdr_free(GLIBC_2.0) [SVID.3] xdr_int(GLIBC_2.0) [SVID.3] xdr_long(GLIBC_2.0) [SVID.3] xdr_opaque(GLIBC_2.0) [SVID.3] xdr_opaque_auth(GLIBC_2.0) [SVID.3] xdr_pointer(GLIBC_2.0) [SVID.3] xdr_reference(GLIBC_2.0) [SVID.3] xdr_rejected_reply(GLIBC_2.0) [SVID.3] xdr_replymsg(GLIBC_2.0) [SVID.3] xdr_short(GLIBC_2.0) [SVID.3] xdr_string(GLIBC_2.0) [SVID.3] xdr_u_char(GLIBC_2.0) [SVID.3] xdr_u_int(GLIBC_2.0) [LSB] xdr_u_long(GLIBC_2.0) [SVID.3] xdr_u_short(GLIBC_2.0) [SVID.3] xdr_union(GLIBC_2.0) [SVID.3] xdr_vector(GLIBC_2.0) [SVID.3] xdr_void(GLIBC_2.0) [SVID.3] xdr_wrapstring(GLIBC_2.0) [SVID.3] xdrmem_create(GLIBC_2.0) [SVID.3] xdrrec_create(GLIBC_2.0) [SVID.3] xdrrec_eof(GLIBC_2.0) [SVID.3] _________________________________________________________ 11.2.2. System Calls _________________________________________________________ 11.2.2.1. Interfaces for System Calls An LSB conforming implementation shall provide the architecture specific functions for System Calls specified in Table 11-3, with the full mandatory functionality as described in the referenced underlying specification. Table 11-3. libc - System Calls Function Interfaces __fxstat(GLIBC_2.0) [LSB] __getpgid(GLIBC_2.0) [LSB] __lxstat(GLIBC_2.0) [LSB] __xmknod(GLIBC_2.0) [LSB] __xstat(GLIBC_2.0) [LSB] access(GLIBC_2.0) [SUSv3] acct(GLIBC_2.0) [LSB] alarm(GLIBC_2.0) [SUSv3] brk(GLIBC_2.0) [SUSv2] chdir(GLIBC_2.0) [SUSv3] chmod(GLIBC_2.0) [SUSv3] chown(GLIBC_2.1) [SUSv3] chroot(GLIBC_2.0) [SUSv2] clock(GLIBC_2.0) [SUSv3] close(GLIBC_2.0) [SUSv3] closedir(GLIBC_2.0) [SUSv3] creat(GLIBC_2.0) [SUSv3] dup(GLIBC_2.0) [SUSv3] dup2(GLIBC_2.0) [SUSv3] execl(GLIBC_2.0) [SUSv3] execle(GLIBC_2.0) [SUSv3] execlp(GLIBC_2.0) [SUSv3] execv(GLIBC_2.0) [SUSv3] execve(GLIBC_2.0) [SUSv3] execvp(GLIBC_2.0) [SUSv3] exit(GLIBC_2.0) [SUSv3] fchdir(GLIBC_2.0) [SUSv3] fchmod(GLIBC_2.0) [SUSv3] fchown(GLIBC_2.0) [SUSv3] fcntl(GLIBC_2.0) [LSB] fdatasync(GLIBC_2.0) [SUSv3] flock(GLIBC_2.0) [LSB] fork(GLIBC_2.0) [SUSv3] fstatvfs(GLIBC_2.1) [SUSv3] fsync(GLIBC_2.0) [SUSv3] ftime(GLIBC_2.0) [SUSv3] ftruncate(GLIBC_2.0) [SUSv3] getcontext(GLIBC_2.1) [SUSv3] getegid(GLIBC_2.0) [SUSv3] geteuid(GLIBC_2.0) [SUSv3] getgid(GLIBC_2.0) [SUSv3] getgroups(GLIBC_2.0) [SUSv3] getitimer(GLIBC_2.0) [SUSv3] getloadavg(GLIBC_2.2) [LSB] getpagesize(GLIBC_2.0) [SUSv2] getpgid(GLIBC_2.0) [SUSv3] getpgrp(GLIBC_2.0) [SUSv3] getpid(GLIBC_2.0) [SUSv3] getppid(GLIBC_2.0) [SUSv3] getpriority(GLIBC_2.0) [SUSv3] getrlimit(GLIBC_2.2) [SUSv3] getrusage(GLIBC_2.0) [SUSv3] getsid(GLIBC_2.0) [SUSv3] getuid(GLIBC_2.0) [SUSv3] getwd(GLIBC_2.0) [SUSv3] initgroups(GLIBC_2.0) [LSB] ioctl(GLIBC_2.0) [LSB] kill(GLIBC_2.0) [LSB] killpg(GLIBC_2.0) [SUSv3] lchown(GLIBC_2.0) [SUSv3] link(GLIBC_2.0) [LSB] lockf(GLIBC_2.0) [SUSv3] lseek(GLIBC_2.0) [SUSv3] mkdir(GLIBC_2.0) [SUSv3] mkfifo(GLIBC_2.0) [SUSv3] mlock(GLIBC_2.0) [SUSv3] mlockall(GLIBC_2.0) [SUSv3] mmap(GLIBC_2.0) [SUSv3] mprotect(GLIBC_2.0) [SUSv3] msync(GLIBC_2.0) [SUSv3] munlock(GLIBC_2.0) [SUSv3] munlockall(GLIBC_2.0) [SUSv3] munmap(GLIBC_2.0) [SUSv3] nanosleep(GLIBC_2.0) [SUSv3] nice(GLIBC_2.0) [SUSv3] open(GLIBC_2.0) [SUSv3] opendir(GLIBC_2.0) [SUSv3] pathconf(GLIBC_2.0) [SUSv3] pause(GLIBC_2.0) [SUSv3] pipe(GLIBC_2.0) [SUSv3] poll(GLIBC_2.0) [SUSv3] read(GLIBC_2.0) [SUSv3] readdir(GLIBC_2.0) [SUSv3] readdir_r(GLIBC_2.0) [SUSv3] readlink(GLIBC_2.0) [SUSv3] readv(GLIBC_2.0) [SUSv3] rename(GLIBC_2.0) [SUSv3] rmdir(GLIBC_2.0) [SUSv3] sbrk(GLIBC_2.0) [SUSv2] sched_get_priority_max(GLIBC_2.0) [SUSv3] sched_get_priority_min(GLIBC_2.0) [SUSv3] sched_getparam(GLIBC_2.0) [SUSv3] sched_getscheduler(GLIBC_2.0) [SUSv3] sched_rr_get_interval(GLIBC_2.0) [SUSv3] sched_setparam(GLIBC_2.0) [SUSv3] sched_setscheduler(GLIBC_2.0) [SUSv3] sched_yield(GLIBC_2.0) [SUSv3] select(GLIBC_2.0) [SUSv3] setcontext(GLIBC_2.0) [SUSv3] setegid(GLIBC_2.0) [SUSv3] seteuid(GLIBC_2.0) [SUSv3] setgid(GLIBC_2.0) [SUSv3] setitimer(GLIBC_2.0) [SUSv3] setpgid(GLIBC_2.0) [SUSv3] setpgrp(GLIBC_2.0) [SUSv3] setpriority(GLIBC_2.0) [SUSv3] setregid(GLIBC_2.0) [SUSv3] setreuid(GLIBC_2.0) [SUSv3] setrlimit(GLIBC_2.2) [SUSv3] setrlimit64(GLIBC_2.1) [LFS] setsid(GLIBC_2.0) [SUSv3] setuid(GLIBC_2.0) [SUSv3] sleep(GLIBC_2.0) [SUSv3] statvfs(GLIBC_2.1) [SUSv3] stime(GLIBC_2.0) [LSB] symlink(GLIBC_2.0) [SUSv3] sync(GLIBC_2.0) [SUSv3] sysconf(GLIBC_2.0) [SUSv3] time(GLIBC_2.0) [SUSv3] times(GLIBC_2.0) [SUSv3] truncate(GLIBC_2.0) [SUSv3] ulimit(GLIBC_2.0) [SUSv3] umask(GLIBC_2.0) [SUSv3] uname(GLIBC_2.0) [SUSv3] unlink(GLIBC_2.0) [LSB] utime(GLIBC_2.0) [SUSv3] utimes(GLIBC_2.0) [SUSv3] vfork(GLIBC_2.0) [SUSv3] wait(GLIBC_2.0) [SUSv3] wait4(GLIBC_2.0) [LSB] waitpid(GLIBC_2.0) [LSB] write(GLIBC_2.0) [SUSv3] writev(GLIBC_2.0) [SUSv3] _________________________________________________________ 11.2.3. Standard I/O _________________________________________________________ 11.2.3.1. Interfaces for Standard I/O An LSB conforming implementation shall provide the architecture specific functions for Standard I/O specified in Table 11-4, with the full mandatory functionality as described in the referenced underlying specification. Table 11-4. libc - Standard I/O Function Interfaces _IO_feof(GLIBC_2.0) [LSB] _IO_getc(GLIBC_2.0) [LSB] _IO_putc(GLIBC_2.0) [LSB] _IO_puts(GLIBC_2.0) [LSB] asprintf(GLIBC_2.0) [LSB] clearerr(GLIBC_2.0) [SUSv3] ctermid(GLIBC_2.0) [SUSv3] fclose(GLIBC_2.1) [SUSv3] fdopen(GLIBC_2.1) [SUSv3] feof(GLIBC_2.0) [SUSv3] ferror(GLIBC_2.0) [SUSv3] fflush(GLIBC_2.0) [SUSv3] fflush_unlocked(GLIBC_2.0) [LSB] fgetc(GLIBC_2.0) [SUSv3] fgetpos(GLIBC_2.2) [SUSv3] fgets(GLIBC_2.0) [SUSv3] fgetwc_unlocked(GLIBC_2.2) [LSB] fileno(GLIBC_2.0) [SUSv3] flockfile(GLIBC_2.0) [SUSv3] fopen(GLIBC_2.1) [SUSv3] fprintf(GLIBC_2.0) [SUSv3] fputc(GLIBC_2.0) [SUSv3] fputs(GLIBC_2.0) [SUSv3] fread(GLIBC_2.0) [SUSv3] freopen(GLIBC_2.0) [SUSv3] fscanf(GLIBC_2.0) [LSB] fseek(GLIBC_2.0) [SUSv3] fseeko(GLIBC_2.1) [SUSv3] fsetpos(GLIBC_2.2) [SUSv3] ftell(GLIBC_2.0) [SUSv3] ftello(GLIBC_2.1) [SUSv3] fwrite(GLIBC_2.0) [SUSv3] getc(GLIBC_2.0) [SUSv3] getc_unlocked(GLIBC_2.0) [SUSv3] getchar(GLIBC_2.0) [SUSv3] getchar_unlocked(GLIBC_2.0) [SUSv3] getw(GLIBC_2.0) [SUSv2] pclose(GLIBC_2.1) [SUSv3] popen(GLIBC_2.1) [SUSv3] printf(GLIBC_2.0) [SUSv3] putc(GLIBC_2.0) [SUSv3] putc_unlocked(GLIBC_2.0) [SUSv3] putchar(GLIBC_2.0) [SUSv3] putchar_unlocked(GLIBC_2.0) [SUSv3] puts(GLIBC_2.0) [SUSv3] putw(GLIBC_2.0) [SUSv2] remove(GLIBC_2.0) [SUSv3] rewind(GLIBC_2.0) [SUSv3] rewinddir(GLIBC_2.0) [SUSv3] scanf(GLIBC_2.0) [LSB] seekdir(GLIBC_2.0) [SUSv3] setbuf(GLIBC_2.0) [SUSv3] setbuffer(GLIBC_2.0) [LSB] setvbuf(GLIBC_2.0) [SUSv3] snprintf(GLIBC_2.0) [SUSv3] sprintf(GLIBC_2.0) [SUSv3] sscanf(GLIBC_2.0) [LSB] telldir(GLIBC_2.0) [SUSv3] tempnam(GLIBC_2.0) [SUSv3] ungetc(GLIBC_2.0) [SUSv3] vasprintf(GLIBC_2.0) [LSB] vdprintf(GLIBC_2.0) [LSB] vfprintf(GLIBC_2.0) [SUSv3] vprintf(GLIBC_2.0) [SUSv3] vsnprintf(GLIBC_2.0) [SUSv3] vsprintf(GLIBC_2.0) [SUSv3] An LSB conforming implementation shall provide the architecture specific data interfaces for Standard I/O specified in Table 11-5, with the full mandatory functionality as described in the referenced underlying specification. Table 11-5. libc - Standard I/O Data Interfaces stderr(GLIBC_2.0) [SUSv3] stdin(GLIBC_2.0) [SUSv3] stdout(GLIBC_2.0) [SUSv3] _________________________________________________________ 11.2.4. Signal Handling _________________________________________________________ 11.2.4.1. Interfaces for Signal Handling An LSB conforming implementation shall provide the architecture specific functions for Signal Handling specified in Table 11-6, with the full mandatory functionality as described in the referenced underlying specification. Table 11-6. libc - Signal Handling Function Interfaces __libc_current_sigrtmax(GLIBC_2.1) [LSB] __libc_current_sigrtmin(GLIBC_2.1) [LSB] __sigsetjmp(GLIBC_2.0) [LSB] __sysv_signal(GLIBC_2.0) [LSB] bsd_signal(GLIBC_2.0) [SUSv3] psignal(GLIBC_2.0) [LSB] raise(GLIBC_2.0) [SUSv3] sigaction(GLIBC_2.0) [SUSv3] sigaddset(GLIBC_2.0) [SUSv3] sigaltstack(GLIBC_2.0) [SUSv3] sigandset(GLIBC_2.0) [LSB] sigdelset(GLIBC_2.0) [SUSv3] sigemptyset(GLIBC_2.0) [SUSv3] sigfillset(GLIBC_2.0) [SUSv3] sighold(GLIBC_2.1) [SUSv3] sigignore(GLIBC_2.1) [SUSv3] siginterrupt(GLIBC_2.0) [SUSv3] sigisemptyset(GLIBC_2.0) [LSB] sigismember(GLIBC_2.0) [SUSv3] siglongjmp(GLIBC_2.0) [SUSv3] signal(GLIBC_2.0) [SUSv3] sigorset(GLIBC_2.0) [LSB] sigpause(GLIBC_2.0) [SUSv3] sigpending(GLIBC_2.0) [SUSv3] sigprocmask(GLIBC_2.0) [SUSv3] sigqueue(GLIBC_2.1) [SUSv3] sigrelse(GLIBC_2.1) [SUSv3] sigreturn(GLIBC_2.0) [LSB] sigset(GLIBC_2.1) [SUSv3] sigsuspend(GLIBC_2.0) [SUSv3] sigtimedwait(GLIBC_2.1) [SUSv3] sigwait(GLIBC_2.0) [SUSv3] sigwaitinfo(GLIBC_2.1) [SUSv3] An LSB conforming implementation shall provide the architecture specific data interfaces for Signal Handling specified in Table 11-7, with the full mandatory functionality as described in the referenced underlying specification. Table 11-7. libc - Signal Handling Data Interfaces _sys_siglist(GLIBC_2.3.3) [LSB] _________________________________________________________ 11.2.5. Localization Functions _________________________________________________________ 11.2.5.1. Interfaces for Localization Functions An LSB conforming implementation shall provide the architecture specific functions for Localization Functions specified in Table 11-8, with the full mandatory functionality as described in the referenced underlying specification. Table 11-8. libc - Localization Functions Function Interfaces bind_textdomain_codeset(GLIBC_2.2) [LSB] bindtextdomain(GLIBC_2.0) [LSB] catclose(GLIBC_2.0) [SUSv3] catgets(GLIBC_2.0) [SUSv3] catopen(GLIBC_2.0) [SUSv3] dcgettext(GLIBC_2.0) [LSB] dcngettext(GLIBC_2.2) [LSB] dgettext(GLIBC_2.0) [LSB] dngettext(GLIBC_2.2) [LSB] gettext(GLIBC_2.0) [LSB] iconv(GLIBC_2.1) [SUSv3] iconv_close(GLIBC_2.1) [SUSv3] iconv_open(GLIBC_2.1) [SUSv3] localeconv(GLIBC_2.2) [SUSv3] ngettext(GLIBC_2.2) [LSB] nl_langinfo(GLIBC_2.0) [SUSv3] setlocale(GLIBC_2.0) [SUSv3] textdomain(GLIBC_2.0) [LSB] An LSB conforming implementation shall provide the architecture specific data interfaces for Localization Functions specified in Table 11-9, with the full mandatory functionality as described in the referenced underlying specification. Table 11-9. libc - Localization Functions Data Interfaces _nl_msg_cat_cntr(GLIBC_2.0) [LSB] _________________________________________________________ 11.2.6. Socket Interface _________________________________________________________ 11.2.6.1. Interfaces for Socket Interface An LSB conforming implementation shall provide the architecture specific functions for Socket Interface specified in Table 11-10, with the full mandatory functionality as described in the referenced underlying specification. Table 11-10. libc - Socket Interface Function Interfaces __h_errno_location(GLIBC_2.0) [LSB] accept(GLIBC_2.0) [SUSv3] bind(GLIBC_2.0) [SUSv3] bindresvport(GLIBC_2.0) [LSB] connect(GLIBC_2.0) [SUSv3] gethostid(GLIBC_2.0) [SUSv3] gethostname(GLIBC_2.0) [SUSv3] getpeername(GLIBC_2.0) [SUSv3] getsockname(GLIBC_2.0) [SUSv3] getsockopt(GLIBC_2.0) [LSB] if_freenameindex(GLIBC_2.1) [SUSv3] if_indextoname(GLIBC_2.1) [SUSv3] if_nameindex(GLIBC_2.1) [SUSv3] if_nametoindex(GLIBC_2.1) [SUSv3] listen(GLIBC_2.0) [SUSv3] recv(GLIBC_2.0) [SUSv3] recvfrom(GLIBC_2.0) [SUSv3] recvmsg(GLIBC_2.0) [SUSv3] send(GLIBC_2.0) [SUSv3] sendmsg(GLIBC_2.0) [SUSv3] sendto(GLIBC_2.0) [SUSv3] setsockopt(GLIBC_2.0) [LSB] shutdown(GLIBC_2.0) [SUSv3] sockatmark(GLIBC_2.2.4) [SUSv3] socket(GLIBC_2.0) [SUSv3] socketpair(GLIBC_2.0) [SUSv3] _________________________________________________________ 11.2.7. Wide Characters _________________________________________________________ 11.2.7.1. Interfaces for Wide Characters An LSB conforming implementation shall provide the architecture specific functions for Wide Characters specified in Table 11-11, with the full mandatory functionality as described in the referenced underlying specification. Table 11-11. libc - Wide Characters Function Interfaces __wcstod_internal(GLIBC_2.0) [LSB] __wcstof_internal(GLIBC_2.0) [LSB] __wcstol_internal(GLIBC_2.0) [LSB] __wcstold_internal(GLIBC_2.0) [LSB] __wcstoul_internal(GLIBC_2.0) [LSB] btowc(GLIBC_2.0) [SUSv3] fgetwc(GLIBC_2.2) [SUSv3] fgetws(GLIBC_2.2) [SUSv3] fputwc(GLIBC_2.2) [SUSv3] fputws(GLIBC_2.2) [SUSv3] fwide(GLIBC_2.2) [SUSv3] fwprintf(GLIBC_2.2) [SUSv3] fwscanf(GLIBC_2.2) [LSB] getwc(GLIBC_2.2) [SUSv3] getwchar(GLIBC_2.2) [SUSv3] mblen(GLIBC_2.0) [SUSv3] mbrlen(GLIBC_2.0) [SUSv3] mbrtowc(GLIBC_2.0) [SUSv3] mbsinit(GLIBC_2.0) [SUSv3] mbsnrtowcs(GLIBC_2.0) [LSB] mbsrtowcs(GLIBC_2.0) [SUSv3] mbstowcs(GLIBC_2.0) [SUSv3] mbtowc(GLIBC_2.0) [SUSv3] putwc(GLIBC_2.2) [SUSv3] putwchar(GLIBC_2.2) [SUSv3] swprintf(GLIBC_2.2) [SUSv3] swscanf(GLIBC_2.2) [LSB] towctrans(GLIBC_2.0) [SUSv3] towlower(GLIBC_2.0) [SUSv3] towupper(GLIBC_2.0) [SUSv3] ungetwc(GLIBC_2.2) [SUSv3] vfwprintf(GLIBC_2.2) [SUSv3] vfwscanf(GLIBC_2.2) [LSB] vswprintf(GLIBC_2.2) [SUSv3] vswscanf(GLIBC_2.2) [LSB] vwprintf(GLIBC_2.2) [SUSv3] vwscanf(GLIBC_2.2) [LSB] wcpcpy(GLIBC_2.0) [LSB] wcpncpy(GLIBC_2.0) [LSB] wcrtomb(GLIBC_2.0) [SUSv3] wcscasecmp(GLIBC_2.1) [LSB] wcscat(GLIBC_2.0) [SUSv3] wcschr(GLIBC_2.0) [SUSv3] wcscmp(GLIBC_2.0) [SUSv3] wcscoll(GLIBC_2.0) [SUSv3] wcscpy(GLIBC_2.0) [SUSv3] wcscspn(GLIBC_2.0) [SUSv3] wcsdup(GLIBC_2.0) [LSB] wcsftime(GLIBC_2.2) [SUSv3] wcslen(GLIBC_2.0) [SUSv3] wcsncasecmp(GLIBC_2.1) [LSB] wcsncat(GLIBC_2.0) [SUSv3] wcsncmp(GLIBC_2.0) [SUSv3] wcsncpy(GLIBC_2.0) [SUSv3] wcsnlen(GLIBC_2.1) [LSB] wcsnrtombs(GLIBC_2.0) [LSB] wcspbrk(GLIBC_2.0) [SUSv3] wcsrchr(GLIBC_2.0) [SUSv3] wcsrtombs(GLIBC_2.0) [SUSv3] wcsspn(GLIBC_2.0) [SUSv3] wcsstr(GLIBC_2.0) [SUSv3] wcstod(GLIBC_2.0) [SUSv3] wcstof(GLIBC_2.0) [SUSv3] wcstoimax(GLIBC_2.1) [SUSv3] wcstok(GLIBC_2.0) [SUSv3] wcstol(GLIBC_2.0) [SUSv3] wcstold(GLIBC_2.0) [SUSv3] wcstoll(GLIBC_2.1) [SUSv3] wcstombs(GLIBC_2.0) [SUSv3] wcstoq(GLIBC_2.0) [LSB] wcstoul(GLIBC_2.0) [SUSv3] wcstoull(GLIBC_2.1) [SUSv3] wcstoumax(GLIBC_2.1) [SUSv3] wcstouq(GLIBC_2.0) [LSB] wcswcs(GLIBC_2.1) [SUSv3] wcswidth(GLIBC_2.0) [SUSv3] wcsxfrm(GLIBC_2.0) [SUSv3] wctob(GLIBC_2.0) [SUSv3] wctomb(GLIBC_2.0) [SUSv3] wctrans(GLIBC_2.0) [SUSv3] wctype(GLIBC_2.0) [SUSv3] wcwidth(GLIBC_2.0) [SUSv3] wmemchr(GLIBC_2.0) [SUSv3] wmemcmp(GLIBC_2.0) [SUSv3] wmemcpy(GLIBC_2.0) [SUSv3] wmemmove(GLIBC_2.0) [SUSv3] wmemset(GLIBC_2.0) [SUSv3] wprintf(GLIBC_2.2) [SUSv3] wscanf(GLIBC_2.2) [LSB] _________________________________________________________ 11.2.8. String Functions _________________________________________________________ 11.2.8.1. Interfaces for String Functions An LSB conforming implementation shall provide the architecture specific functions for String Functions specified in Table 11-12, with the full mandatory functionality as described in the referenced underlying specification. Table 11-12. libc - String Functions Function Interfaces __mempcpy(GLIBC_2.0) [LSB] __rawmemchr(GLIBC_2.1) [LSB] __stpcpy(GLIBC_2.0) [LSB] __strdup(GLIBC_2.0) [LSB] __strtod_internal(GLIBC_2.0) [LSB] __strtof_internal(GLIBC_2.0) [LSB] __strtok_r(GLIBC_2.0) [LSB] __strtol_internal(GLIBC_2.0) [LSB] __strtold_internal(GLIBC_2.0) [LSB] __strtoll_internal(GLIBC_2.0) [LSB] __strtoul_internal(GLIBC_2.0) [LSB] __strtoull_internal(GLIBC_2.0) [LSB] bcmp(GLIBC_2.0) [SUSv3] bcopy(GLIBC_2.0) [SUSv3] bzero(GLIBC_2.0) [SUSv3] ffs(GLIBC_2.0) [SUSv3] index(GLIBC_2.0) [SUSv3] memccpy(GLIBC_2.0) [SUSv3] memchr(GLIBC_2.0) [SUSv3] memcmp(GLIBC_2.0) [SUSv3] memcpy(GLIBC_2.0) [SUSv3] memmove(GLIBC_2.0) [SUSv3] memrchr(GLIBC_2.2) [LSB] memset(GLIBC_2.0) [SUSv3] rindex(GLIBC_2.0) [SUSv3] stpcpy(GLIBC_2.0) [LSB] stpncpy(GLIBC_2.0) [LSB] strcasecmp(GLIBC_2.0) [SUSv3] strcasestr(GLIBC_2.1) [LSB] strcat(GLIBC_2.0) [SUSv3] strchr(GLIBC_2.0) [SUSv3] strcmp(GLIBC_2.0) [SUSv3] strcoll(GLIBC_2.0) [SUSv3] strcpy(GLIBC_2.0) [SUSv3] strcspn(GLIBC_2.0) [SUSv3] strdup(GLIBC_2.0) [SUSv3] strerror(GLIBC_2.0) [SUSv3] strerror_r(GLIBC_2.0) [LSB] strfmon(GLIBC_2.0) [SUSv3] strftime(GLIBC_2.0) [SUSv3] strlen(GLIBC_2.0) [SUSv3] strncasecmp(GLIBC_2.0) [SUSv3] strncat(GLIBC_2.0) [SUSv3] strncmp(GLIBC_2.0) [SUSv3] strncpy(GLIBC_2.0) [SUSv3] strndup(GLIBC_2.0) [LSB] strnlen(GLIBC_2.0) [LSB] strpbrk(GLIBC_2.0) [SUSv3] strptime(GLIBC_2.0) [LSB] strrchr(GLIBC_2.0) [SUSv3] strsep(GLIBC_2.0) [LSB] strsignal(GLIBC_2.0) [LSB] strspn(GLIBC_2.0) [SUSv3] strstr(GLIBC_2.0) [SUSv3] strtof(GLIBC_2.0) [SUSv3] strtoimax(GLIBC_2.1) [SUSv3] strtok(GLIBC_2.0) [SUSv3] strtok_r(GLIBC_2.0) [SUSv3] strtold(GLIBC_2.0) [SUSv3] strtoll(GLIBC_2.0) [SUSv3] strtoq(GLIBC_2.0) [LSB] strtoull(GLIBC_2.0) [SUSv3] strtoumax(GLIBC_2.1) [SUSv3] strtouq(GLIBC_2.0) [LSB] strxfrm(GLIBC_2.0) [SUSv3] swab(GLIBC_2.0) [SUSv3] _________________________________________________________ 11.2.9. IPC Functions _________________________________________________________ 11.2.9.1. Interfaces for IPC Functions An LSB conforming implementation shall provide the architecture specific functions for IPC Functions specified in Table 11-13, with the full mandatory functionality as described in the referenced underlying specification. Table 11-13. libc - IPC Functions Function Interfaces ftok(GLIBC_2.0) [SUSv3] msgctl(GLIBC_2.2) [SUSv3] msgget(GLIBC_2.0) [SUSv3] msgrcv(GLIBC_2.0) [SUSv3] msgsnd(GLIBC_2.0) [SUSv3] semctl(GLIBC_2.2) [SUSv3] semget(GLIBC_2.0) [SUSv3] semop(GLIBC_2.0) [SUSv3] shmat(GLIBC_2.0) [SUSv3] shmctl(GLIBC_2.2) [SUSv3] shmdt(GLIBC_2.0) [SUSv3] shmget(GLIBC_2.0) [SUSv3] _________________________________________________________ 11.2.10. Regular Expressions _________________________________________________________ 11.2.10.1. Interfaces for Regular Expressions An LSB conforming implementation shall provide the architecture specific functions for Regular Expressions specified in Table 11-14, with the full mandatory functionality as described in the referenced underlying specification. Table 11-14. libc - Regular Expressions Function Interfaces regcomp(GLIBC_2.0) [SUSv3] regerror(GLIBC_2.0) [SUSv3] regexec(GLIBC_2.3.4) [LSB] regfree(GLIBC_2.0) [SUSv3] _________________________________________________________ 11.2.11. Character Type Functions _________________________________________________________ 11.2.11.1. Interfaces for Character Type Functions An LSB conforming implementation shall provide the architecture specific functions for Character Type Functions specified in Table 11-15, with the full mandatory functionality as described in the referenced underlying specification. Table 11-15. libc - Character Type Functions Function Interfaces __ctype_get_mb_cur_max(GLIBC_2.0) [LSB] _tolower(GLIBC_2.0) [SUSv3] _toupper(GLIBC_2.0) [SUSv3] isalnum(GLIBC_2.0) [SUSv3] isalpha(GLIBC_2.0) [SUSv3] isascii(GLIBC_2.0) [SUSv3] iscntrl(GLIBC_2.0) [SUSv3] isdigit(GLIBC_2.0) [SUSv3] isgraph(GLIBC_2.0) [SUSv3] islower(GLIBC_2.0) [SUSv3] isprint(GLIBC_2.0) [SUSv3] ispunct(GLIBC_2.0) [SUSv3] isspace(GLIBC_2.0) [SUSv3] isupper(GLIBC_2.0) [SUSv3] iswalnum(GLIBC_2.0) [SUSv3] iswalpha(GLIBC_2.0) [SUSv3] iswblank(GLIBC_2.1) [SUSv3] iswcntrl(GLIBC_2.0) [SUSv3] iswctype(GLIBC_2.0) [SUSv3] iswdigit(GLIBC_2.0) [SUSv3] iswgraph(GLIBC_2.0) [SUSv3] iswlower(GLIBC_2.0) [SUSv3] iswprint(GLIBC_2.0) [SUSv3] iswpunct(GLIBC_2.0) [SUSv3] iswspace(GLIBC_2.0) [SUSv3] iswupper(GLIBC_2.0) [SUSv3] iswxdigit(GLIBC_2.0) [SUSv3] isxdigit(GLIBC_2.0) [SUSv3] toascii(GLIBC_2.0) [SUSv3] tolower(GLIBC_2.0) [SUSv3] toupper(GLIBC_2.0) [SUSv3] _________________________________________________________ 11.2.12. Time Manipulation _________________________________________________________ 11.2.12.1. Interfaces for Time Manipulation An LSB conforming implementation shall provide the architecture specific functions for Time Manipulation specified in Table 11-16, with the full mandatory functionality as described in the referenced underlying specification. Table 11-16. libc - Time Manipulation Function Interfaces adjtime(GLIBC_2.0) [LSB] asctime(GLIBC_2.0) [SUSv3] asctime_r(GLIBC_2.0) [SUSv3] ctime(GLIBC_2.0) [SUSv3] ctime_r(GLIBC_2.0) [SUSv3] difftime(GLIBC_2.0) [SUSv3] gmtime(GLIBC_2.0) [SUSv3] gmtime_r(GLIBC_2.0) [SUSv3] localtime(GLIBC_2.0) [SUSv3] localtime_r(GLIBC_2.0) [SUSv3] mktime(GLIBC_2.0) [SUSv3] tzset(GLIBC_2.0) [SUSv3] ualarm(GLIBC_2.0) [SUSv3] An LSB conforming implementation shall provide the architecture specific data interfaces for Time Manipulation specified in Table 11-17, with the full mandatory functionality as described in the referenced underlying specification. Table 11-17. libc - Time Manipulation Data Interfaces __daylight(GLIBC_2.0) [LSB] __timezone(GLIBC_2.0) [LSB] __tzname(GLIBC_2.0) [LSB] daylight(GLIBC_2.0) [SUSv3] timezone(GLIBC_2.0) [SUSv3] tzname(GLIBC_2.0) [SUSv3] _________________________________________________________ 11.2.13. Terminal Interface Functions _________________________________________________________ 11.2.13.1. Interfaces for Terminal Interface Functions An LSB conforming implementation shall provide the architecture specific functions for Terminal Interface Functions specified in Table 11-18, with the full mandatory functionality as described in the referenced underlying specification. Table 11-18. libc - Terminal Interface Functions Function Interfaces cfgetispeed(GLIBC_2.0) [SUSv3] cfgetospeed(GLIBC_2.0) [SUSv3] cfmakeraw(GLIBC_2.0) [LSB] cfsetispeed(GLIBC_2.0) [SUSv3] cfsetospeed(GLIBC_2.0) [SUSv3] cfsetspeed(GLIBC_2.0) [LSB] tcdrain(GLIBC_2.0) [SUSv3] tcflow(GLIBC_2.0) [SUSv3] tcflush(GLIBC_2.0) [SUSv3] tcgetattr(GLIBC_2.0) [SUSv3] tcgetpgrp(GLIBC_2.0) [SUSv3] tcgetsid(GLIBC_2.1) [SUSv3] tcsendbreak(GLIBC_2.0) [SUSv3] tcsetattr(GLIBC_2.0) [SUSv3] tcsetpgrp(GLIBC_2.0) [SUSv3] _________________________________________________________ 11.2.14. System Database Interface _________________________________________________________ 11.2.14.1. Interfaces for System Database Interface An LSB conforming implementation shall provide the architecture specific functions for System Database Interface specified in Table 11-19, with the full mandatory functionality as described in the referenced underlying specification. Table 11-19. libc - System Database Interface Function Interfaces endgrent(GLIBC_2.0) [SUSv3] endprotoent(GLIBC_2.0) [SUSv3] endpwent(GLIBC_2.0) [SUSv3] endservent(GLIBC_2.0) [SUSv3] endutent(GLIBC_2.0) [SUSv2] endutxent(GLIBC_2.1) [SUSv3] getgrent(GLIBC_2.0) [SUSv3] getgrgid(GLIBC_2.0) [SUSv3] getgrgid_r(GLIBC_2.1.2) [SUSv3] getgrnam(GLIBC_2.0) [SUSv3] getgrnam_r(GLIBC_2.1.2) [SUSv3] getgrouplist(GLIBC_2.2.4) [LSB] gethostbyaddr(GLIBC_2.0) [SUSv3] gethostbyname(GLIBC_2.0) [SUSv3] getprotobyname(GLIBC_2.0) [SUSv3] getprotobynumber(GLIBC_2.0) [SUSv3] getprotoent(GLIBC_2.0) [SUSv3] getpwent(GLIBC_2.0) [SUSv3] getpwnam(GLIBC_2.0) [SUSv3] getpwnam_r(GLIBC_2.1.2) [SUSv3] getpwuid(GLIBC_2.0) [SUSv3] getpwuid_r(GLIBC_2.1.2) [SUSv3] getservbyname(GLIBC_2.0) [SUSv3] getservbyport(GLIBC_2.0) [SUSv3] getservent(GLIBC_2.0) [SUSv3] getutent(GLIBC_2.0) [LSB] getutent_r(GLIBC_2.0) [LSB] getutxent(GLIBC_2.1) [SUSv3] getutxid(GLIBC_2.1) [SUSv3] getutxline(GLIBC_2.1) [SUSv3] pututxline(GLIBC_2.1) [SUSv3] setgrent(GLIBC_2.0) [SUSv3] setgroups(GLIBC_2.0) [LSB] setprotoent(GLIBC_2.0) [SUSv3] setpwent(GLIBC_2.0) [SUSv3] setservent(GLIBC_2.0) [SUSv3] setutent(GLIBC_2.0) [LSB] setutxent(GLIBC_2.1) [SUSv3] utmpname(GLIBC_2.0) [LSB] _________________________________________________________ 11.2.15. Language Support _________________________________________________________ 11.2.15.1. Interfaces for Language Support An LSB conforming implementation shall provide the architecture specific functions for Language Support specified in Table 11-20, with the full mandatory functionality as described in the referenced underlying specification. Table 11-20. libc - Language Support Function Interfaces __libc_start_main(GLIBC_2.0) [LSB] _________________________________________________________ 11.2.16. Large File Support _________________________________________________________ 11.2.16.1. Interfaces for Large File Support An LSB conforming implementation shall provide the architecture specific functions for Large File Support specified in Table 11-21, with the full mandatory functionality as described in the referenced underlying specification. Table 11-21. libc - Large File Support Function Interfaces __fxstat64(GLIBC_2.2) [LSB] __lxstat64(GLIBC_2.2) [LSB] __xstat64(GLIBC_2.2) [LSB] creat64(GLIBC_2.1) [LFS] fgetpos64(GLIBC_2.2) [LFS] fopen64(GLIBC_2.1) [LFS] freopen64(GLIBC_2.1) [LFS] fseeko64(GLIBC_2.1) [LFS] fsetpos64(GLIBC_2.2) [LFS] fstatvfs64(GLIBC_2.1) [LFS] ftello64(GLIBC_2.1) [LFS] ftruncate64(GLIBC_2.1) [LFS] ftw64(GLIBC_2.1) [LFS] getrlimit64(GLIBC_2.2) [LFS] lockf64(GLIBC_2.1) [LFS] mkstemp64(GLIBC_2.2) [LFS] mmap64(GLIBC_2.1) [LFS] nftw64(GLIBC_2.3.3) [LFS] readdir64(GLIBC_2.2) [LFS] statvfs64(GLIBC_2.1) [LFS] tmpfile64(GLIBC_2.1) [LFS] truncate64(GLIBC_2.1) [LFS] _________________________________________________________ 11.2.17. Standard Library _________________________________________________________ 11.2.17.1. Interfaces for Standard Library An LSB conforming implementation shall provide the architecture specific functions for Standard Library specified in Table 11-22, with the full mandatory functionality as described in the referenced underlying specification. Table 11-22. libc - Standard Library Function Interfaces _Exit(GLIBC_2.1.1) [SUSv3] __assert_fail(GLIBC_2.0) [LSB] __cxa_atexit(GLIBC_2.1.3) [LSB] __errno_location(GLIBC_2.0) [LSB] __fpending(GLIBC_2.2) [LSB] __getpagesize(GLIBC_2.0) [LSB] __isinf(GLIBC_2.0) [LSB] __isinff(GLIBC_2.0) [LSB] __isinfl(GLIBC_2.0) [LSB] __isnan(GLIBC_2.0) [LSB] __isnanf(GLIBC_2.0) [LSB] __isnanl(GLIBC_2.0) [LSB] __sysconf(GLIBC_2.2) [LSB] _exit(GLIBC_2.0) [SUSv3] _longjmp(GLIBC_2.0) [SUSv3] _setjmp(GLIBC_2.0) [SUSv3] a64l(GLIBC_2.0) [SUSv3] abort(GLIBC_2.0) [SUSv3] abs(GLIBC_2.0) [SUSv3] atof(GLIBC_2.0) [SUSv3] atoi(GLIBC_2.0) [SUSv3] atol(GLIBC_2.0) [SUSv3] atoll(GLIBC_2.0) [SUSv3] basename(GLIBC_2.0) [SUSv3] bsearch(GLIBC_2.0) [SUSv3] calloc(GLIBC_2.0) [SUSv3] closelog(GLIBC_2.0) [SUSv3] confstr(GLIBC_2.0) [SUSv3] cuserid(GLIBC_2.0) [SUSv2] daemon(GLIBC_2.0) [LSB] dirname(GLIBC_2.0) [SUSv3] div(GLIBC_2.0) [SUSv3] drand48(GLIBC_2.0) [SUSv3] ecvt(GLIBC_2.0) [SUSv3] erand48(GLIBC_2.0) [SUSv3] err(GLIBC_2.0) [LSB] error(GLIBC_2.0) [LSB] errx(GLIBC_2.0) [LSB] fcvt(GLIBC_2.0) [SUSv3] fmtmsg(GLIBC_2.1) [SUSv3] fnmatch(GLIBC_2.2.3) [SUSv3] fpathconf(GLIBC_2.0) [SUSv3] free(GLIBC_2.0) [SUSv3] freeaddrinfo(GLIBC_2.0) [SUSv3] ftrylockfile(GLIBC_2.0) [SUSv3] ftw(GLIBC_2.0) [SUSv3] funlockfile(GLIBC_2.0) [SUSv3] gai_strerror(GLIBC_2.1) [SUSv3] gcvt(GLIBC_2.0) [SUSv3] getaddrinfo(GLIBC_2.0) [SUSv3] getcwd(GLIBC_2.0) [SUSv3] getdate(GLIBC_2.1) [SUSv3] getenv(GLIBC_2.0) [SUSv3] getlogin(GLIBC_2.0) [SUSv3] getlogin_r(GLIBC_2.0) [SUSv3] getnameinfo(GLIBC_2.1) [SUSv3] getopt(GLIBC_2.0) [LSB] getopt_long(GLIBC_2.0) [LSB] getopt_long_only(GLIBC_2.0) [LSB] getsubopt(GLIBC_2.0) [SUSv3] gettimeofday(GLIBC_2.0) [SUSv3] glob(GLIBC_2.0) [SUSv3] glob64(GLIBC_2.1) [LSB] globfree(GLIBC_2.0) [SUSv3] globfree64(GLIBC_2.1) [LSB] grantpt(GLIBC_2.1) [SUSv3] hcreate(GLIBC_2.0) [SUSv3] hdestroy(GLIBC_2.0) [SUSv3] hsearch(GLIBC_2.0) [SUSv3] htonl(GLIBC_2.0) [SUSv3] htons(GLIBC_2.0) [SUSv3] imaxabs(GLIBC_2.1.1) [SUSv3] imaxdiv(GLIBC_2.1.1) [SUSv3] inet_addr(GLIBC_2.0) [SUSv3] inet_ntoa(GLIBC_2.0) [SUSv3] inet_ntop(GLIBC_2.0) [SUSv3] inet_pton(GLIBC_2.0) [SUSv3] initstate(GLIBC_2.0) [SUSv3] insque(GLIBC_2.0) [SUSv3] isatty(GLIBC_2.0) [SUSv3] isblank(GLIBC_2.0) [SUSv3] jrand48(GLIBC_2.0) [SUSv3] l64a(GLIBC_2.0) [SUSv3] labs(GLIBC_2.0) [SUSv3] lcong48(GLIBC_2.0) [SUSv3] ldiv(GLIBC_2.0) [SUSv3] lfind(GLIBC_2.0) [SUSv3] llabs(GLIBC_2.0) [SUSv3] lldiv(GLIBC_2.0) [SUSv3] longjmp(GLIBC_2.0) [SUSv3] lrand48(GLIBC_2.0) [SUSv3] lsearch(GLIBC_2.0) [SUSv3] makecontext(GLIBC_2.1) [SUSv3] malloc(GLIBC_2.0) [SUSv3] memmem(GLIBC_2.0) [LSB] mkstemp(GLIBC_2.0) [SUSv3] mktemp(GLIBC_2.0) [SUSv3] mrand48(GLIBC_2.0) [SUSv3] nftw(GLIBC_2.3.3) [SUSv3] nrand48(GLIBC_2.0) [SUSv3] ntohl(GLIBC_2.0) [SUSv3] ntohs(GLIBC_2.0) [SUSv3] openlog(GLIBC_2.0) [SUSv3] perror(GLIBC_2.0) [SUSv3] posix_memalign(GLIBC_2.2) [SUSv3] posix_openpt(GLIBC_2.2.1) [SUSv3] ptsname(GLIBC_2.1) [SUSv3] putenv(GLIBC_2.0) [SUSv3] qsort(GLIBC_2.0) [SUSv3] rand(GLIBC_2.0) [SUSv3] rand_r(GLIBC_2.0) [SUSv3] random(GLIBC_2.0) [SUSv3] realloc(GLIBC_2.0) [SUSv3] realpath(GLIBC_2.3) [SUSv3] remque(GLIBC_2.0) [SUSv3] seed48(GLIBC_2.0) [SUSv3] setenv(GLIBC_2.0) [SUSv3] sethostname(GLIBC_2.0) [LSB] setlogmask(GLIBC_2.0) [SUSv3] setstate(GLIBC_2.0) [SUSv3] srand(GLIBC_2.0) [SUSv3] srand48(GLIBC_2.0) [SUSv3] srandom(GLIBC_2.0) [SUSv3] strtod(GLIBC_2.0) [SUSv3] strtol(GLIBC_2.0) [SUSv3] strtoul(GLIBC_2.0) [SUSv3] swapcontext(GLIBC_2.1) [SUSv3] syslog(GLIBC_2.0) [SUSv3] system(GLIBC_2.0) [LSB] tdelete(GLIBC_2.0) [SUSv3] tfind(GLIBC_2.0) [SUSv3] tmpfile(GLIBC_2.1) [SUSv3] tmpnam(GLIBC_2.0) [SUSv3] tsearch(GLIBC_2.0) [SUSv3] ttyname(GLIBC_2.0) [SUSv3] ttyname_r(GLIBC_2.0) [SUSv3] twalk(GLIBC_2.0) [SUSv3] unlockpt(GLIBC_2.1) [SUSv3] unsetenv(GLIBC_2.0) [SUSv3] usleep(GLIBC_2.0) [SUSv3] verrx(GLIBC_2.0) [LSB] vfscanf(GLIBC_2.0) [LSB] vscanf(GLIBC_2.0) [LSB] vsscanf(GLIBC_2.0) [LSB] vsyslog(GLIBC_2.0) [LSB] warn(GLIBC_2.0) [LSB] warnx(GLIBC_2.0) [LSB] wordexp(GLIBC_2.1) [SUSv3] wordfree(GLIBC_2.1) [SUSv3] An LSB conforming implementation shall provide the architecture specific data interfaces for Standard Library specified in Table 11-23, with the full mandatory functionality as described in the referenced underlying specification. Table 11-23. libc - Standard Library Data Interfaces __environ(GLIBC_2.0) [LSB] _environ(GLIBC_2.0) [LSB] _sys_errlist(GLIBC_2.3) [LSB] environ(GLIBC_2.0) [SUSv3] getdate_err(GLIBC_2.1) [SUSv3] optarg(GLIBC_2.0) [SUSv3] opterr(GLIBC_2.0) [SUSv3] optind(GLIBC_2.0) [SUSv3] optopt(GLIBC_2.0) [SUSv3] _________________________________________________________ 11.3. Data Definitions for libc This section defines global identifiers and their values that are associated with interfaces contained in libc. These definitions are organized into groups that correspond to system headers. This convention is used as a convenience for the reader, and does not imply the existence of these headers, or their content. Where an interface is defined as requiring a particular system header file all of the data definitions for that system header file presented here shall be in effect. This section gives data definitions to promote binary application portability, not to repeat source interface definitions available elsewhere. System providers and application developers should use this ABI to supplement - not to replace - source interface definition specifications. This specification uses the ISO C (1999) C Language as the reference programming language, and data definitions are specified in ISO C format. The C language is used here as a convenient notation. Using a C language description of these data objects does not preclude their use by other programming languages. _________________________________________________________ 11.3.1. arpa/inet.h extern uint32_t htonl(uint32_t); extern uint16_t htons(uint16_t); extern in_addr_t inet_addr(const char *); extern char *inet_ntoa(struct in_addr); extern const char *inet_ntop(int, const void *, char *, socklen_t); extern int inet_pton(int, const char *, void *); extern uint32_t ntohl(uint32_t); extern uint16_t ntohs(uint16_t); _________________________________________________________ 11.3.2. assert.h extern void __assert_fail(const char *, const char *, unsigned int, const char *); _________________________________________________________ 11.3.3. ctype.h extern int _tolower(int); extern int _toupper(int); extern int isalnum(int); extern int isalpha(int); extern int isascii(int); extern int iscntrl(int); extern int isdigit(int); extern int isgraph(int); extern int islower(int); extern int isprint(int); extern int ispunct(int); extern int isspace(int); extern int isupper(int); extern int isxdigit(int); extern int toascii(int); extern int tolower(int); extern int toupper(int); extern int isblank(int); extern const unsigned short **__ctype_b_loc(void); extern const int32_t **__ctype_toupper_loc(void); extern const int32_t **__ctype_tolower_loc(void); _________________________________________________________ 11.3.4. dirent.h extern void rewinddir(DIR *); extern void seekdir(DIR *, long int); extern long int telldir(DIR *); extern int closedir(DIR *); extern DIR *opendir(const char *); extern struct dirent *readdir(DIR *); extern struct dirent64 *readdir64(DIR *); extern int readdir_r(DIR *, struct dirent *, struct dirent **); _________________________________________________________ 11.3.5. err.h extern void err(int, const char *, ...); extern void errx(int, const char *, ...); extern void warn(const char *, ...); extern void warnx(const char *, ...); extern void error(int, int, const char *, ...); _________________________________________________________ 11.3.6. errno.h #define EDEADLOCK EDEADLK extern int *__errno_location(void); _________________________________________________________ 11.3.7. fcntl.h #define F_GETLK64 12 #define F_SETLK64 13 #define F_SETLKW64 14 extern int lockf64(int, int, off64_t); extern int fcntl(int, int, ...); _________________________________________________________ 11.3.8. fmtmsg.h extern int fmtmsg(long int, const char *, int, const char *, const char *, const char *); _________________________________________________________ 11.3.9. fnmatch.h extern int fnmatch(const char *, const char *, int); _________________________________________________________ 11.3.10. ftw.h extern int ftw(const char *, __ftw_func_t, int); extern int ftw64(const char *, __ftw64_func_t, int); extern int nftw(const char *, __nftw_func_t, int, int); extern int nftw64(const char *, __nftw64_func_t, int, int); _________________________________________________________ 11.3.11. getopt.h extern int getopt_long(int, char *const, const char *, const struct option *, int *); extern int getopt_long_only(int, char *const, const char *, const struct option *, int *); _________________________________________________________ 11.3.12. glob.h extern int glob(const char *, int, int (*__errfunc) (const char *p1, int p2) , glob_t *); extern int glob64(const char *, int, int (*__errfunc) (const char *p1, int p2) , glob64_t *); extern void globfree(glob_t *); extern void globfree64(glob64_t *); _________________________________________________________ 11.3.13. grp.h extern void endgrent(void); extern struct group *getgrent(void); extern struct group *getgrgid(gid_t); extern struct group *getgrnam(char *); extern int initgroups(const char *, gid_t); extern void setgrent(void); extern int setgroups(size_t, const gid_t *); extern int getgrgid_r(gid_t, struct group *, char *, size_t, struct group **); extern int getgrnam_r(const char *, struct group *, char *, size_t, struct group **); extern int getgrouplist(const char *, gid_t, gid_t *, int *); _________________________________________________________ 11.3.14. iconv.h extern size_t iconv(iconv_t, char **, size_t *, char **, size_t *); extern int iconv_close(iconv_t); extern iconv_t iconv_open(char *, char *); _________________________________________________________ 11.3.15. inttypes.h typedef unsigned long long int uint64_t; typedef long long int intmax_t; typedef unsigned long long int uintmax_t; typedef unsigned int uintptr_t; extern intmax_t strtoimax(const char *, char **, int); extern uintmax_t strtoumax(const char *, char **, int); extern intmax_t wcstoimax(const wchar_t *, wchar_t * *, int); extern uintmax_t wcstoumax(const wchar_t *, wchar_t * *, int); extern intmax_t imaxabs(intmax_t); extern imaxdiv_t imaxdiv(intmax_t, intmax_t); _________________________________________________________ 11.3.16. langinfo.h extern char *nl_langinfo(nl_item); _________________________________________________________ 11.3.17. libgen.h extern char *basename(const char *); extern char *dirname(char *); _________________________________________________________ 11.3.18. libintl.h extern char *bindtextdomain(const char *, const char *); extern char *dcgettext(const char *, const char *, int); extern char *dgettext(const char *, const char *); extern char *gettext(const char *); extern char *textdomain(const char *); extern char *bind_textdomain_codeset(const char *, const char *); extern char *dcngettext(const char *, const char *, const char *, unsigned long int, int); extern char *dngettext(const char *, const char *, const char *, unsigned long int); extern char *ngettext(const char *, const char *, unsigned long int); _________________________________________________________ 11.3.19. limits.h #define ULONG_MAX 0xFFFFFFFFUL #define LONG_MAX 2147483647 #define CHAR_MIN 0 #define CHAR_MAX 255 #define PTHREAD_STACK_MIN 16384 _________________________________________________________ 11.3.20. locale.h extern struct lconv *localeconv(void); extern char *setlocale(int, const char *); extern locale_t uselocale(locale_t); extern void freelocale(locale_t); extern locale_t duplocale(locale_t); extern locale_t newlocale(int, const char *, locale_t); _________________________________________________________ 11.3.21. monetary.h extern ssize_t strfmon(char *, size_t, const char *, ...); _________________________________________________________ 11.3.22. net/if.h extern void if_freenameindex(struct if_nameindex *); extern char *if_indextoname(unsigned int, char *); extern struct if_nameindex *if_nameindex(void); extern unsigned int if_nametoindex(const char *); _________________________________________________________ 11.3.23. netdb.h extern void endprotoent(void); extern void endservent(void); extern void freeaddrinfo(struct addrinfo *); extern const char *gai_strerror(int); extern int getaddrinfo(const char *, const char *, const struct addrinfo *, struct addrinfo **); extern struct hostent *gethostbyaddr(const void *, socklen_t, int); extern struct hostent *gethostbyname(const char *); extern struct protoent *getprotobyname(const char *); extern struct protoent *getprotobynumber(int); extern struct protoent *getprotoent(void); extern struct servent *getservbyname(const char *, const char *); extern struct servent *getservbyport(int, const char *); extern struct servent *getservent(void); extern void setprotoent(int); extern void setservent(int); extern int *__h_errno_location(void); _________________________________________________________ 11.3.24. netinet/in.h extern int bindresvport(int, struct sockaddr_in *); _________________________________________________________ 11.3.25. netinet/ip.h /* * This header is architecture neutral * Please refer to the generic specification for details */ _________________________________________________________ 11.3.26. netinet/tcp.h /* * This header is architecture neutral * Please refer to the generic specification for details */ _________________________________________________________ 11.3.27. netinet/udp.h /* * This header is architecture neutral * Please refer to the generic specification for details */ _________________________________________________________ 11.3.28. nl_types.h extern int catclose(nl_catd); extern char *catgets(nl_catd, int, int, const char *); extern nl_catd catopen(const char *, int); _________________________________________________________ 11.3.29. poll.h extern int poll(struct pollfd *, nfds_t, int); _________________________________________________________ 11.3.30. pty.h extern int openpty(int *, int *, char *, struct termios *, struct winsize *); extern int forkpty(int *, char *, struct termios *, struct winsize *); _________________________________________________________ 11.3.31. pwd.h extern void endpwent(void); extern struct passwd *getpwent(void); extern struct passwd *getpwnam(char *); extern struct passwd *getpwuid(uid_t); extern void setpwent(void); extern int getpwnam_r(char *, struct passwd *, char *, size_t, struct passwd **); extern int getpwuid_r(uid_t, struct passwd *, char *, size_t, struct passwd **); _________________________________________________________ 11.3.32. regex.h extern int regcomp(regex_t *, const char *, int); extern size_t regerror(int, const regex_t *, char *, size_t); extern int regexec(const regex_t *, const char *, size_t, regmatch_t, int); extern void regfree(regex_t *); _________________________________________________________ 11.3.33. rpc/auth.h extern struct AUTH *authnone_create(void); extern int key_decryptsession(char *, union des_block *); extern bool_t xdr_opaque_auth(XDR *, struct opaque_auth *); _________________________________________________________ 11.3.34. rpc/clnt.h extern struct CLIENT *clnt_create(const char *, const u_long, const u_long, const char *); extern void clnt_pcreateerror(const char *); extern void clnt_perrno(enum clnt_stat); extern void clnt_perror(struct CLIENT *, const char *); extern char *clnt_spcreateerror(const char *); extern char *clnt_sperrno(enum clnt_stat); extern char *clnt_sperror(struct CLIENT *, const char *); _________________________________________________________ 11.3.35. rpc/pmap_clnt.h extern u_short pmap_getport(struct sockaddr_in *, const u_long, const u_long, u_int); extern bool_t pmap_set(const u_long, const u_long, int, u_short); extern bool_t pmap_unset(u_long, u_long); _________________________________________________________ 11.3.36. rpc/rpc_msg.h extern bool_t xdr_callhdr(XDR *, struct rpc_msg *); _________________________________________________________ 11.3.37. rpc/svc.h extern void svc_getreqset(fd_set *); extern bool_t svc_register(SVCXPRT *, rpcprog_t, rpcvers_t, __dispatch_fn_t, rpcprot_t); extern void svc_run(void); extern bool_t svc_sendreply(SVCXPRT *, xdrproc_t, caddr_t); extern void svcerr_auth(SVCXPRT *, enum auth_stat); extern void svcerr_decode(SVCXPRT *); extern void svcerr_noproc(SVCXPRT *); extern void svcerr_noprog(SVCXPRT *); extern void svcerr_progvers(SVCXPRT *, rpcvers_t, rpcvers_t); extern void svcerr_systemerr(SVCXPRT *); extern void svcerr_weakauth(SVCXPRT *); extern SVCXPRT *svctcp_create(int, u_int, u_int); extern SVCXPRT *svcudp_create(int); _________________________________________________________ 11.3.38. rpc/types.h /* * This header is architecture neutral * Please refer to the generic specification for details */ _________________________________________________________ 11.3.39. rpc/xdr.h extern bool_t xdr_array(XDR *, caddr_t *, u_int *, u_int, u_int, xdrproc_t); extern bool_t xdr_bool(XDR *, bool_t *); extern bool_t xdr_bytes(XDR *, char **, u_int *, u_int); extern bool_t xdr_char(XDR *, char *); extern bool_t xdr_double(XDR *, double *); extern bool_t xdr_enum(XDR *, enum_t *); extern bool_t xdr_float(XDR *, float *); extern void xdr_free(xdrproc_t, char *); extern bool_t xdr_int(XDR *, int *); extern bool_t xdr_long(XDR *, long int *); extern bool_t xdr_opaque(XDR *, caddr_t, u_int); extern bool_t xdr_pointer(XDR *, char **, u_int, xdrproc_t); extern bool_t xdr_reference(XDR *, caddr_t *, u_int, xdrproc_t); extern bool_t xdr_short(XDR *, short *); extern bool_t xdr_string(XDR *, char **, u_int); extern bool_t xdr_u_char(XDR *, u_char *); extern bool_t xdr_u_int(XDR *, u_int *); extern bool_t xdr_u_long(XDR *, u_long *); extern bool_t xdr_u_short(XDR *, u_short *); extern bool_t xdr_union(XDR *, enum_t *, char *, const struct xdr_discrim *, xdrproc_t); extern bool_t xdr_vector(XDR *, char *, u_int, u_int, xdrproc_t); extern bool_t xdr_void(void); extern bool_t xdr_wrapstring(XDR *, char **); extern void xdrmem_create(XDR *, caddr_t, u_int, enum xdr_op); extern void xdrrec_create(XDR *, u_int, u_int, caddr_t, int (*__readit) (char *p1, char *p2, int p3) , int (*__writeit) (char *p1, char *p2, int p3) ); extern typedef int bool_t xdrrec_eof(XDR *); _________________________________________________________ 11.3.40. sched.h extern int sched_get_priority_max(int); extern int sched_get_priority_min(int); extern int sched_getparam(pid_t, struct sched_param *); extern int sched_getscheduler(pid_t); extern int sched_rr_get_interval(pid_t, struct timespec *); extern int sched_setparam(pid_t, const struct sched_param *); extern int sched_setscheduler(pid_t, int, const struct sched_param *); extern int sched_yield(void); _________________________________________________________ 11.3.41. search.h extern int hcreate(size_t); extern ENTRY *hsearch(ENTRY, ACTION); extern void insque(void *, void *); extern void *lfind(const void *, const void *, size_t *, size_t, __compar_fn_t); extern void *lsearch(const void *, void *, size_t *, size_t, __compar_fn_t); extern void remque(void *); extern void hdestroy(void); extern void *tdelete(const void *, void **, __compar_fn_t); extern void *tfind(const void *, void *const *, __compar_fn_t); extern void *tsearch(const void *, void **, __compar_fn_t); extern void twalk(const void *, __action_fn_t); _________________________________________________________ 11.3.42. setjmp.h typedef int __jmp_buf[14]; extern int __sigsetjmp(jmp_buf, int); extern void longjmp(jmp_buf, int); extern void siglongjmp(sigjmp_buf, int); extern void _longjmp(jmp_buf, int); extern int _setjmp(jmp_buf); _________________________________________________________ 11.3.43. signal.h #define __NUM_ACRS 16 #define __NUM_FPRS 16 #define __NUM_GPRS 16 typedef struct { unsigned long int mask; unsigned long int addr; } __attribute__ ((aligned(8))) _psw_t; typedef struct { _psw_t psw; unsigned long int gprs[__NUM_GPRS]; unsigned int acrs[__NUM_ACRS]; } _s390_regs_common; #define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int))-3) #define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int))-3) struct sigaction { union { sighandler_t _sa_handler; void (*_sa_sigaction) (int, siginfo_t *, void *); } __sigaction_handler; sigset_t sa_mask; unsigned long int sa_flags; void (*sa_restorer) (void); }; #define MINSIGSTKSZ 2048 #define SIGSTKSZ 8192 typedef struct { unsigned int fpc; double fprs[__NUM_FPRS]; } _s390_fp_regs; typedef struct { _s390_regs_common regs; _s390_fp_regs fpregs; } _sigregs; struct sigcontext { unsigned long int oldmask[2]; _sigregs *sregs; }; extern int __libc_current_sigrtmax(void); extern int __libc_current_sigrtmin(void); extern sighandler_t __sysv_signal(int, sighandler_t); extern char *const _sys_siglist(void); extern int killpg(pid_t, int); extern void psignal(int, const char *); extern int raise(int); extern int sigaddset(sigset_t *, int); extern int sigandset(sigset_t *, const sigset_t *, const sigset_t *); extern int sigdelset(sigset_t *, int); extern int sigemptyset(sigset_t *); extern int sigfillset(sigset_t *); extern int sighold(int); extern int sigignore(int); extern int siginterrupt(int, int); extern int sigisemptyset(const sigset_t *); extern int sigismember(const sigset_t *, int); extern int sigorset(sigset_t *, const sigset_t *, const sigset_t *); extern int sigpending(sigset_t *); extern int sigrelse(int); extern sighandler_t sigset(int, sighandler_t); extern int pthread_kill(pthread_t, int); extern int pthread_sigmask(int, sigset_t *, sigset_t *); extern int sigaction(int, const struct sigaction *, struct sigaction *); extern int sigwait(sigset_t *, int *); extern int kill(pid_t, int); extern int sigaltstack(const struct sigaltstack *, struct sigaltstack *); extern sighandler_t signal(int, sighandler_t); extern int sigpause(int); extern int sigprocmask(int, const sigset_t *, sigset_t *); extern int sigreturn(struct sigcontext *); extern int sigsuspend(const sigset_t *); extern int sigqueue(pid_t, int, const union sigval); extern int sigwaitinfo(const sigset_t *, siginfo_t *); extern int sigtimedwait(const sigset_t *, siginfo_t *, const struct timespec *); extern sighandler_t bsd_signal(int, sighandler_t); _________________________________________________________ 11.3.44. stddef.h typedef unsigned long int size_t; typedef int ptrdiff_t; _________________________________________________________ 11.3.45. stdio.h #define __IO_FILE_SIZE 152 extern char *const _sys_errlist(void); extern void clearerr(FILE *); extern int fclose(FILE *); extern FILE *fdopen(int, const char *); extern int fflush_unlocked(FILE *); extern int fileno(FILE *); extern FILE *fopen(const char *, const char *); extern int fprintf(FILE *, const char *, ...); extern int fputc(int, FILE *); extern FILE *freopen(const char *, const char *, FILE *); extern FILE *freopen64(const char *, const char *, FILE *); extern int fscanf(FILE *, const char *, ...); extern int fseek(FILE *, long int, int); extern int fseeko(FILE *, off_t, int); extern int fseeko64(FILE *, loff_t, int); extern off_t ftello(FILE *); extern loff_t ftello64(FILE *); extern int getchar(void); extern int getchar_unlocked(void); extern int getw(FILE *); extern int pclose(FILE *); extern void perror(const char *); extern FILE *popen(const char *, const char *); extern int printf(const char *, ...); extern int putc_unlocked(int, FILE *); extern int putchar(int); extern int putchar_unlocked(int); extern int putw(int, FILE *); extern int remove(const char *); extern void rewind(FILE *); extern int scanf(const char *, ...); extern void setbuf(FILE *, char *); extern int sprintf(char *, const char *, ...); extern int sscanf(const char *, const char *, ...); extern FILE *stderr(void); extern FILE *stdin(void); extern FILE *stdout(void); extern char *tempnam(const char *, const char *); extern FILE *tmpfile64(void); extern FILE *tmpfile(void); extern char *tmpnam(char *); extern int vfprintf(FILE *, const char *, va_list); extern int vprintf(const char *, va_list); extern int feof(FILE *); extern int ferror(FILE *); extern int fflush(FILE *); extern int fgetc(FILE *); extern int fgetpos(FILE *, fpos_t *); extern char *fgets(char *, int, FILE *); extern int fputs(const char *, FILE *); extern size_t fread(void *, size_t, size_t, FILE *); extern int fsetpos(FILE *, const fpos_t *); extern long int ftell(FILE *); extern size_t fwrite(const void *, size_t, size_t, FILE *); extern int getc(FILE *); extern int putc(int, FILE *); extern int puts(const char *); extern int setvbuf(FILE *, char *, int, size_t); extern int snprintf(char *, size_t, const char *, ...); extern int ungetc(int, FILE *); extern int vsnprintf(char *, size_t, const char *, va_list); extern int vsprintf(char *, const char *, va_list); extern void flockfile(FILE *); extern int asprintf(char **, const char *, ...); extern int fgetpos64(FILE *, fpos64_t *); extern FILE *fopen64(const char *, const char *); extern int fsetpos64(FILE *, const fpos64_t *); extern int ftrylockfile(FILE *); extern void funlockfile(FILE *); extern int getc_unlocked(FILE *); extern void setbuffer(FILE *, char *, size_t); extern int vasprintf(char **, const char *, va_list); extern int vdprintf(int, const char *, va_list); extern int vfscanf(FILE *, const char *, va_list); extern int vscanf(const char *, va_list); extern int vsscanf(const char *, const char *, va_list); extern size_t __fpending(FILE *); _________________________________________________________ 11.3.46. stdlib.h extern double __strtod_internal(const char *, char **, int); extern float __strtof_internal(const char *, char **, int); extern long int __strtol_internal(const char *, char **, int, int); extern long double __strtold_internal(const char *, char **, int); extern long long int __strtoll_internal(const char *, char **, int, int); extern unsigned long int __strtoul_internal(const char *, char **, int, int); extern unsigned long long int __strtoull_internal(const char *, char **, int, int); extern long int a64l(const char *); extern void abort(void); extern int abs(int); extern double atof(const char *); extern int atoi(char *); extern long int atol(char *); extern long long int atoll(const char *); extern void *bsearch(const void *, const void *, size_t, size_t, __compar_fn_t); extern div_t div(int, int); extern double drand48(void); extern char *ecvt(double, int, int *, int *); extern double erand48(unsigned short); extern void exit(int); extern char *fcvt(double, int, int *, int *); extern char *gcvt(double, int, char *); extern char *getenv(const char *); extern int getsubopt(char **, char *const *, char **); extern int grantpt(int); extern long int jrand48(unsigned short); extern char *l64a(long int); extern long int labs(long int); extern void lcong48(unsigned short); extern ldiv_t ldiv(long int, long int); extern long long int llabs(long long int); extern lldiv_t lldiv(long long int, long long int); extern long int lrand48(void); extern int mblen(const char *, size_t); extern size_t mbstowcs(wchar_t *, const char *, size_t); extern int mbtowc(wchar_t *, const char *, size_t); extern char *mktemp(char *); extern long int mrand48(void); extern long int nrand48(unsigned short); extern char *ptsname(int); extern int putenv(char *); extern void qsort(void *, size_t, size_t, __compar_fn_t); extern int rand(void); extern int rand_r(unsigned int *); extern unsigned short *seed48(unsigned short); extern void srand48(long int); extern int unlockpt(int); extern size_t wcstombs(char *, const wchar_t *, size_t); extern int wctomb(char *, wchar_t); extern int system(const char *); extern void *calloc(size_t, size_t); extern void free(void *); extern char *initstate(unsigned int, char *, size_t); extern void *malloc(size_t); extern long int random(void); extern void *realloc(void *, size_t); extern char *setstate(char *); extern void srand(unsigned int); extern void srandom(unsigned int); extern double strtod(char *, char **); extern float strtof(const char *, char **); extern long int strtol(char *, char **, int); extern long double strtold(const char *, char **); extern long long int strtoll(const char *, char **, int); extern long long int strtoq(const char *, char **, int); extern unsigned long int strtoul(const char *, char **, int); extern unsigned long long int strtoull(const char *, char **, int); extern unsigned long long int strtouq(const char *, char **, int); extern void _Exit(int); extern size_t __ctype_get_mb_cur_max(void); extern char **environ(void); extern char *realpath(const char *, char *); extern int setenv(const char *, const char *, int); extern int unsetenv(const char *); extern int getloadavg(double, int); extern int mkstemp64(char *); extern int posix_memalign(void **, size_t, size_t); extern int posix_openpt(int); _________________________________________________________ 11.3.47. string.h extern void *__mempcpy(void *, const void *, size_t); extern char *__stpcpy(char *, const char *); extern char *__strtok_r(char *, const char *, char **); extern void bcopy(void *, void *, size_t); extern void *memchr(void *, int, size_t); extern int memcmp(void *, void *, size_t); extern void *memcpy(void *, void *, size_t); extern void *memmem(const void *, size_t, const void *, size_t); extern void *memmove(void *, const void *, size_t); extern void *memset(void *, int, size_t); extern char *strcat(char *, const char *); extern char *strchr(char *, int); extern int strcmp(char *, char *); extern int strcoll(const char *, const char *); extern char *strcpy(char *, char *); extern size_t strcspn(const char *, const char *); extern char *strerror(int); extern size_t strlen(char *); extern char *strncat(char *, char *, size_t); extern int strncmp(char *, char *, size_t); extern char *strncpy(char *, char *, size_t); extern char *strpbrk(const char *, const char *); extern char *strrchr(char *, int); extern char *strsignal(int); extern size_t strspn(const char *, const char *); extern char *strstr(char *, char *); extern char *strtok(char *, const char *); extern size_t strxfrm(char *, const char *, size_t); extern int bcmp(void *, void *, size_t); extern void bzero(void *, size_t); extern int ffs(int); extern char *index(char *, int); extern void *memccpy(void *, const void *, int, size_t); extern char *rindex(char *, int); extern int strcasecmp(char *, char *); extern char *strdup(char *); extern int strncasecmp(char *, char *, size_t); extern char *strndup(const char *, size_t); extern size_t strnlen(const char *, size_t); extern char *strsep(char **, const char *); extern char *strerror_r(int, char *, size_t); extern char *strtok_r(char *, const char *, char **); extern char *strcasestr(const char *, const char *); extern char *stpcpy(char *, const char *); extern char *stpncpy(char *, const char *, size_t); extern void *memrchr(const void *, int, size_t); _________________________________________________________ 11.3.48. sys/file.h extern int flock(int, int); _________________________________________________________ 11.3.49. sys/ioctl.h #define TIOCGWINSZ 0x5413 #define FIONREAD 0x541B #define TIOCNOTTY 21538 extern int ioctl(int, unsigned long int, ...); _________________________________________________________ 11.3.50. sys/ipc.h struct ipc_perm { key_t __key; uid_t uid; gid_t gid; uid_t cuid; uid_t cgid; unsigned short mode; unsigned short __pad1; unsigned short __seq; unsigned short __pad2; unsigned long int __unused1; unsigned long int __unused2; }; extern key_t ftok(char *, int); _________________________________________________________ 11.3.51. sys/mman.h #define MCL_CURRENT 1 #define MCL_FUTURE 2 extern int msync(void *, size_t, int); extern int mlock(const void *, size_t); extern int mlockall(int); extern void *mmap(void *, size_t, int, int, int, off_t); extern int mprotect(void *, size_t, int); extern int munlock(const void *, size_t); extern int munlockall(void); extern int munmap(void *, size_t); extern void *mmap64(void *, size_t, int, int, int, off64_t); extern int shm_open(const char *, int, mode_t); extern int shm_unlink(const char *); _________________________________________________________ 11.3.52. sys/msg.h typedef unsigned long int msglen_t; typedef unsigned long int msgqnum_t; struct msqid_ds { struct ipc_perm msg_perm; time_t msg_stime; unsigned long int __unused1; time_t msg_rtime; unsigned long int __unused2; time_t msg_ctime; unsigned long int __unused3; unsigned long int __msg_cbytes; msgqnum_t msg_qnum; msglen_t msg_qbytes; pid_t msg_lspid; pid_t msg_lrpid; unsigned long int __unused4; unsigned long int __unused5; }; extern int msgctl(int, int, struct msqid_ds *); extern int msgget(key_t, int); extern int msgrcv(int, void *, size_t, long int, int); extern int msgsnd(int, const void *, size_t, int); _________________________________________________________ 11.3.53. sys/param.h /* * This header is architecture neutral * Please refer to the generic specification for details */ _________________________________________________________ 11.3.54. sys/poll.h /* * This header is architecture neutral * Please refer to the generic specification for details */ _________________________________________________________ 11.3.55. sys/resource.h extern int getpriority(__priority_which_t, id_t); extern int getrlimit64(id_t, struct rlimit64 *); extern int setpriority(__priority_which_t, id_t, int); extern int setrlimit(__rlimit_resource_t, const struct rlimit *); extern int setrlimit64(__rlimit_resource_t, const struct rlimit64 *); extern int getrlimit(__rlimit_resource_t, struct rlimit *); extern int getrusage(int, struct rusage *); _________________________________________________________ 11.3.56. sys/sem.h struct semid_ds { struct ipc_perm sem_perm; time_t sem_otime; unsigned long int __unused1; time_t sem_ctime; unsigned long int __unused2; unsigned long int sem_nsems; unsigned long int __unused3; unsigned long int __unused4; }; extern int semctl(int, int, int, ...); extern int semget(key_t, int, int); extern int semop(int, struct sembuf *, size_t); _________________________________________________________ 11.3.57. sys/shm.h #define SHMLBA (__getpagesize()) typedef unsigned long int shmatt_t; struct shmid_ds { struct ipc_perm shm_perm; size_t shm_segsz; time_t shm_atime; unsigned long int __unused1; time_t shm_dtime; unsigned long int __unused2; time_t shm_ctime; unsigned long int __unused3; pid_t shm_cpid; pid_t shm_lpid; shmatt_t shm_nattch; unsigned long int __unused4; unsigned long int __unused5; }; extern int __getpagesize(void); extern void *shmat(int, const void *, int); extern int shmctl(int, int, struct shmid_ds *); extern int shmdt(const void *); extern int shmget(key_t, size_t, int); _________________________________________________________ 11.3.58. sys/socket.h typedef uint32_t __ss_aligntype; #define SO_RCVLOWAT 18 #define SO_SNDLOWAT 19 #define SO_RCVTIMEO 20 #define SO_SNDTIMEO 21 extern int bind(int, const struct sockaddr *, socklen_t); extern int getnameinfo(const struct sockaddr *, socklen_t, char *, socklen_t, char *, socklen_t, unsigned int); extern int getsockname(int, struct sockaddr *, socklen_t *); extern int listen(int, int); extern int setsockopt(int, int, int, const void *, socklen_t); extern int accept(int, struct sockaddr *, socklen_t *); extern int connect(int, const struct sockaddr *, socklen_t); extern ssize_t recv(int, void *, size_t, int); extern ssize_t recvfrom(int, void *, size_t, int, struct sockaddr *, socklen_t *); extern ssize_t recvmsg(int, struct msghdr *, int); extern ssize_t send(int, const void *, size_t, int); extern ssize_t sendmsg(int, const struct msghdr *, int); extern ssize_t sendto(int, const void *, size_t, int, const struct sockaddr *, socklen_t); extern int getpeername(int, struct sockaddr *, socklen_t *); extern int getsockopt(int, int, int, void *, socklen_t *); extern int shutdown(int, int); extern int socket(int, int, int); extern int socketpair(int, int, int, int); extern int sockatmark(int); _________________________________________________________ 11.3.59. sys/stat.h #define _STAT_VER 3 struct stat { dev_t st_dev; unsigned int __pad1; ino_t st_ino; mode_t st_mode; nlink_t st_nlink; uid_t st_uid; gid_t st_gid; dev_t st_rdev; unsigned int __pad2; off_t st_size; blksize_t st_blksize; blkcnt_t st_blocks; struct timespec st_atim; struct timespec st_mtim; struct timespec st_ctim; unsigned long int __unused4; unsigned long int __unused5; }; struct stat64 { dev_t st_dev; int __pad1; ino_t __st_ino; mode_t st_mode; nlink_t st_nlink; uid_t st_uid; gid_t st_gid; dev_t st_rdev; int __pad2; off64_t st_size; blksize_t st_blksize; blkcnt64_t st_blocks; struct timespec st_atim; struct timespec st_mtim; struct timespec st_ctim; ino64_t st_ino; }; extern int __fxstat(int, int, struct stat *); extern int __fxstat64(int, int, struct stat64 *); extern int __lxstat(int, char *, struct stat *); extern int __lxstat64(int, const char *, struct stat64 *); extern int __xmknod(int, const char *, mode_t, dev_t *); extern int __xstat(int, const char *, struct stat *); extern int __xstat64(int, const char *, struct stat64 *); extern int mkfifo(const char *, mode_t); extern int chmod(const char *, mode_t); extern int fchmod(int, mode_t); extern mode_t umask(mode_t); _________________________________________________________ 11.3.60. sys/statvfs.h struct statvfs { unsigned long int f_bsize; unsigned long int f_frsize; fsblkcnt_t f_blocks; fsblkcnt_t f_bfree; fsblkcnt_t f_bavail; fsfilcnt_t f_files; fsfilcnt_t f_ffree; fsfilcnt_t f_favail; unsigned long int f_fsid; int __f_unused; unsigned long int f_flag; unsigned long int f_namemax; int __f_spare[6]; }; struct statvfs64 { unsigned long int f_bsize; unsigned long int f_frsize; fsblkcnt64_t f_blocks; fsblkcnt64_t f_bfree; fsblkcnt64_t f_bavail; fsfilcnt64_t f_files; fsfilcnt64_t f_ffree; fsfilcnt64_t f_favail; unsigned long int f_fsid; int __f_unused; unsigned long int f_flag; unsigned long int f_namemax; int __f_spare[6]; }; extern int fstatvfs(int, struct statvfs *); extern int fstatvfs64(int, struct statvfs64 *); extern int statvfs(const char *, struct statvfs *); extern int statvfs64(const char *, struct statvfs64 *); _________________________________________________________ 11.3.61. sys/time.h extern int getitimer(__itimer_which_t, struct itimerval *); extern int setitimer(__itimer_which_t, const struct itimerval *, struct itimerval *); extern int adjtime(const struct timeval *, struct timeval *); extern int gettimeofday(struct timeval *, struct timezone *); extern int utimes(const char *, const struct timeval *); _________________________________________________________ 11.3.62. sys/timeb.h extern int ftime(struct timeb *); _________________________________________________________ 11.3.63. sys/times.h extern clock_t times(struct tms *); _________________________________________________________ 11.3.64. sys/types.h typedef long long int int64_t; typedef int32_t ssize_t; #define __FDSET_LONGS 32 _________________________________________________________ 11.3.65. sys/uio.h extern ssize_t readv(int, const struct iovec *, int); extern ssize_t writev(int, const struct iovec *, int); _________________________________________________________ 11.3.66. sys/un.h /* * This header is architecture neutral * Please refer to the generic specification for details */ _________________________________________________________ 11.3.67. sys/utsname.h extern int uname(struct utsname *); _________________________________________________________ 11.3.68. sys/wait.h extern pid_t wait(int *); extern pid_t waitpid(pid_t, int *, int); extern pid_t wait4(pid_t, int *, int, struct rusage *); _________________________________________________________ 11.3.69. syslog.h extern void closelog(void); extern void openlog(const char *, int, int); extern int setlogmask(int); extern void syslog(int, const char *, ...); extern void vsyslog(int, const char *, va_list); _________________________________________________________ 11.3.70. termios.h #define OLCUC 0000002 #define ONLCR 0000004 #define XCASE 0000004 #define NLDLY 0000400 #define CR1 0001000 #define IUCLC 0001000 #define CR2 0002000 #define CR3 0003000 #define CRDLY 0003000 #define TAB1 0004000 #define TAB2 0010000 #define TAB3 0014000 #define TABDLY 0014000 #define BS1 0020000 #define BSDLY 0020000 #define VT1 0040000 #define VTDLY 0040000 #define FF1 0100000 #define FFDLY 0100000 #define VSUSP 10 #define VEOL 11 #define VREPRINT 12 #define VDISCARD 13 #define VWERASE 14 #define VEOL2 16 #define VMIN 6 #define VSWTC 7 #define VSTART 8 #define VSTOP 9 #define IXON 0002000 #define IXOFF 0010000 #define CS6 0000020 #define CS7 0000040 #define CS8 0000060 #define CSIZE 0000060 #define CSTOPB 0000100 #define CREAD 0000200 #define PARENB 0000400 #define PARODD 0001000 #define HUPCL 0002000 #define CLOCAL 0004000 #define VTIME 5 #define ISIG 0000001 #define ICANON 0000002 #define ECHOE 0000020 #define ECHOK 0000040 #define ECHONL 0000100 #define NOFLSH 0000200 #define TOSTOP 0000400 #define ECHOCTL 0001000 #define ECHOPRT 0002000 #define ECHOKE 0004000 #define FLUSHO 0010000 #define PENDIN 0040000 #define IEXTEN 0100000 extern speed_t cfgetispeed(const struct termios *); extern speed_t cfgetospeed(const struct termios *); extern void cfmakeraw(struct termios *); extern int cfsetispeed(struct termios *, speed_t); extern int cfsetospeed(struct termios *, speed_t); extern int cfsetspeed(struct termios *, speed_t); extern int tcflow(int, int); extern int tcflush(int, int); extern pid_t tcgetsid(int); extern int tcsendbreak(int, int); extern int tcsetattr(int, int, const struct termios *); extern int tcdrain(int); extern int tcgetattr(int, struct termios *); _________________________________________________________ 11.3.71. time.h extern int __daylight(void); extern long int __timezone(void); extern char *__tzname(void); extern char *asctime(const struct tm *); extern clock_t clock(void); extern char *ctime(const time_t *); extern char *ctime_r(const time_t *, char *); extern double difftime(time_t, time_t); extern struct tm *getdate(const char *); extern int getdate_err(void); extern struct tm *gmtime(const time_t *); extern struct tm *localtime(const time_t *); extern time_t mktime(struct tm *); extern int stime(const time_t *); extern size_t strftime(char *, size_t, const char *, const struct tm *); extern char *strptime(const char *, const char *, struct tm *); extern time_t time(time_t *); extern int nanosleep(const struct timespec *, struct timespec *); extern int daylight(void); extern long int timezone(void); extern char *tzname(void); extern void tzset(void); extern char *asctime_r(const struct tm *, char *); extern struct tm *gmtime_r(const time_t *, struct tm *); extern struct tm *localtime_r(const time_t *, struct tm *); extern int clock_getcpuclockid(pid_t, clockid_t *); extern int clock_getres(clockid_t, struct timespec *); extern int clock_gettime(clockid_t, struct timespec *); extern int clock_nanosleep(clockid_t, int, const struct timespec *, struct timespec *); extern int clock_settime(clockid_t, const struct timespec *); extern int timer_create(clockid_t, struct sigevent *, timer_t *); extern int timer_delete(timer_t); extern int timer_getoverrun(timer_t); extern int timer_gettime(timer_t, struct itimerspec *); extern int timer_settime(timer_t, int, const struct itimerspec *, struct itimerspec *); _________________________________________________________ 11.3.72. ucontext.h #define NGREG 36 typedef union { double d; float f; } fpreg_t; typedef struct { unsigned int fpc; fpreg_t fprs[16]; } fpregset_t; typedef struct { _psw_t psw; unsigned long int gregs[16]; unsigned int aregs[16]; fpregset_t fpregs; } mcontext_t; typedef struct ucontext { unsigned long int uc_flags; struct ucontext *uc_link; stack_t uc_stack; mcontext_t uc_mcontext; sigset_t uc_sigmask; } ucontext_t; extern int getcontext(ucontext_t *); extern int makecontext(ucontext_t *, void (*func) (void) , int, ...); extern int setcontext(const struct ucontext *); extern int swapcontext(ucontext_t *, const struct ucontext *); _________________________________________________________ 11.3.73. ulimit.h extern long int ulimit(int, ...); _________________________________________________________ 11.3.74. unistd.h typedef int intptr_t; extern char **__environ(void); extern pid_t __getpgid(pid_t); extern void _exit(int); extern int acct(const char *); extern unsigned int alarm(unsigned int); extern int chown(const char *, uid_t, gid_t); extern int chroot(const char *); extern size_t confstr(int, char *, size_t); extern int creat(const char *, mode_t); extern int creat64(const char *, mode_t); extern char *ctermid(char *); extern char *cuserid(char *); extern int daemon(int, int); extern int execl(const char *, const char *, ...); extern int execle(const char *, const char *, ...); extern int execlp(const char *, const char *, ...); extern int execv(const char *, char *const); extern int execvp(const char *, char *const); extern int fdatasync(int); extern int ftruncate64(int, off64_t); extern long int gethostid(void); extern char *getlogin(void); extern int getlogin_r(char *, size_t); extern int getopt(int, char *const, const char *); extern pid_t getpgrp(void); extern pid_t getsid(pid_t); extern char *getwd(char *); extern int lockf(int, int, off_t); extern int mkstemp(char *); extern int nice(int); extern char *optarg(void); extern int opterr(void); extern int optind(void); extern int optopt(void); extern int rename(const char *, const char *); extern int setegid(gid_t); extern int seteuid(uid_t); extern int sethostname(const char *, size_t); extern int setpgrp(void); extern void swab(const void *, void *, ssize_t); extern void sync(void); extern pid_t tcgetpgrp(int); extern int tcsetpgrp(int, pid_t); extern int truncate(const char *, off_t); extern int truncate64(const char *, off64_t); extern char *ttyname(int); extern unsigned int ualarm(useconds_t, useconds_t); extern int usleep(useconds_t); extern int close(int); extern int fsync(int); extern off_t lseek(int, off_t, int); extern int open(const char *, int, ...); extern int pause(void); extern ssize_t read(int, void *, size_t); extern ssize_t write(int, const void *, size_t); extern char *crypt(char *, char *); extern void encrypt(char *, int); extern void setkey(const char *); extern int access(const char *, int); extern int brk(void *); extern int chdir(const char *); extern int dup(int); extern int dup2(int, int); extern int execve(const char *, char *const, char *const); extern int fchdir(int); extern int fchown(int, uid_t, gid_t); extern pid_t fork(void); extern gid_t getegid(void); extern uid_t geteuid(void); extern gid_t getgid(void); extern int getgroups(int, gid_t); extern int gethostname(char *, size_t); extern pid_t getpgid(pid_t); extern pid_t getpid(void); extern uid_t getuid(void); extern int lchown(const char *, uid_t, gid_t); extern int link(const char *, const char *); extern int mkdir(const char *, mode_t); extern long int pathconf(const char *, int); extern int pipe(int); extern int readlink(const char *, char *, size_t); extern int rmdir(const char *); extern void *sbrk(ptrdiff_t); extern int select(int, fd_set *, fd_set *, fd_set *, struct timeval *); extern int setgid(gid_t); extern int setpgid(pid_t, pid_t); extern int setregid(gid_t, gid_t); extern int setreuid(uid_t, uid_t); extern pid_t setsid(void); extern int setuid(uid_t); extern unsigned int sleep(unsigned int); extern int symlink(const char *, const char *); extern long int sysconf(int); extern int unlink(const char *); extern pid_t vfork(void); extern ssize_t pread(int, void *, size_t, off_t); extern ssize_t pwrite(int, const void *, size_t, off_t); extern char **_environ(void); extern long int fpathconf(int, int); extern int ftruncate(int, off_t); extern