Linux Standard Base Core Specification for IA32 3.2 Copyright © 2007 Linux Foundation Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1; with no Invariant Sections, with no Front-Cover Texts, and with no Back-Cover Texts. A copy of the license is included in the section entitled "GNU Free Documentation License". Portions of the text may be copyrighted by the following parties: * The Regents of the University of California * Free Software Foundation * Ian F. Darwin * Paul Vixie * BSDI (now Wind River) * Andrew G Morgan * Jean-loup Gailly and Mark Adler * Massachusetts Institute of Technology * Apple Inc. * Easy Software Products * artofcode LLC * Till Kamppeter * Manfred Wassman * Python Software Foundation These excerpts are being used in accordance with their respective licenses. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries. UNIX is a registered trademark of The Open Group. LSB is a trademark of the Linux Foundation in the United States and other countries. AMD is a trademark of Advanced Micro Devices, Inc. Intel and Itanium are registered trademarks and Intel386 is a trademark of Intel Corporation. PowerPC is a registered trademark and PowerPC Architecture is a trademark of the IBM Corporation. S/390 is a registered trademark of the IBM Corporation. OpenGL is a registered trademark of Silicon Graphics, Inc. __________________________________________________________ Table of Contents Foreword Introduction I. Introductory Elements 1. Scope 1.1. General 1.2. Module Specific Scope 2. References 2.1. Normative References 2.2. Informative References/Bibliography 3. Requirements 3.1. Relevant Libraries 3.2. LSB Implementation Conformance 3.3. LSB Application Conformance 4. Definitions 5. Terminology 6. Documentation Conventions II. Executable and Linking Format (ELF) 7. Introduction 8. Low Level System Information 8.1. Machine Interface 8.2. Function Calling Sequence 8.3. Operating System Interface 8.4. Process Initialization 8.5. Coding Examples 8.6. C Stack Frame 8.7. Debug Information 9. Object Format 9.1. Introduction 9.2. ELF Header 9.3. Special Sections 9.4. Symbol Table 9.5. Relocation 10. Program Loading and Dynamic Linking 10.1. Introduction 10.2. Program Header 10.3. Program Loading 10.4. Dynamic Linking III. Base Libraries 11. Libraries 11.1. Program Interpreter/Dynamic Linker 11.2. Interfaces for libc 11.3. Data Definitions for libc 11.4. Interfaces for libm 11.5. Data Definitions for libm 11.6. Interface Definitions for libm 11.7. Interfaces for libpthread 11.8. Data Definitions for libpthread 11.9. Interfaces for libgcc_s 11.10. Data Definitions for libgcc_s 11.11. Interface Definitions for libgcc_s 11.12. Interfaces for libdl 11.13. Data Definitions for libdl 11.14. Interfaces for libcrypt IV. Utility Libraries 12. Libraries 12.1. Interfaces for libz 12.2. Data Definitions for libz 12.3. Interfaces for libncurses 12.4. Data Definitions for libncurses 12.5. Interfaces for libutil V. Package Format and Installation 13. Software Installation 13.1. Package Dependencies 13.2. Package Architecture Considerations A. Alphabetical Listing of Interfaces A.1. libc A.2. libcrypt A.3. libdl A.4. libgcc_s A.5. libm A.6. libpthread A.7. librt A.8. libutil B. GNU Free Documentation License (Informative) B.1. PREAMBLE B.2. APPLICABILITY AND DEFINITIONS B.3. VERBATIM COPYING B.4. COPYING IN QUANTITY B.5. MODIFICATIONS B.6. COMBINING DOCUMENTS B.7. COLLECTIONS OF DOCUMENTS B.8. AGGREGATION WITH INDEPENDENT WORKS B.9. TRANSLATION B.10. TERMINATION B.11. FUTURE REVISIONS OF THIS LICENSE B.12. How to use this License for your documents List of Tables 2-1. Normative References 2-2. Other References 3-1. Standard Library Names 8-1. Scalar Types 9-1. ELF Special Sections 9-2. Additional Special Sections 11-1. libc Definition 11-2. libc - RPC Function Interfaces 11-3. libc - System Calls Function Interfaces 11-4. libc - System Calls Deprecated Function Interfaces 11-5. libc - Standard I/O Function Interfaces 11-6. libc - Standard I/O Data Interfaces 11-7. libc - Signal Handling Function Interfaces 11-8. libc - Signal Handling Deprecated Function Interfaces 11-9. libc - Signal Handling Data Interfaces 11-10. libc - Localization Functions Function Interfaces 11-11. libc - Localization Functions Data Interfaces 11-12. libc - Posix Spawn Option Function Interfaces 11-13. libc - Posix Advisory Option Function Interfaces 11-14. libc - Socket Interface Function Interfaces 11-15. libc - Socket Interface Data Interfaces 11-16. libc - Wide Characters Function Interfaces 11-17. libc - String Functions Function Interfaces 11-18. libc - String Functions Deprecated Function Interfaces 11-19. libc - IPC Functions Function Interfaces 11-20. libc - Regular Expressions Function Interfaces 11-21. libc - Character Type Functions Function Interfaces 11-22. libc - Time Manipulation Function Interfaces 11-23. libc - Time Manipulation Data Interfaces 11-24. libc - Terminal Interface Functions Function Interfaces 11-25. libc - System Database Interface Function Interfaces 11-26. libc - System Database Interface Deprecated Function Interfaces 11-27. libc - Language Support Function Interfaces 11-28. libc - Large File Support Function Interfaces 11-29. libc - Large File Support Deprecated Function Interfaces 11-30. libc - Standard Library Function Interfaces 11-31. libc - Standard Library Deprecated Function Interfaces 11-32. libc - Standard Library Data Interfaces 11-33. libm Definition 11-34. libm - Math Function Interfaces 11-35. libm - Math Deprecated Function Interfaces 11-36. libm - Math Data Interfaces 11-37. libpthread Definition 11-38. libpthread - Realtime Threads Function Interfaces 11-39. libpthread - Advanced Realtime Threads Function Interfaces 11-40. libpthread - Posix Threads Function Interfaces 11-41. libpthread - Posix Threads Deprecated Function Interfaces 11-42. libpthread - Thread aware versions of libc interfaces Function Interfaces 11-43. libgcc_s Definition 11-44. libgcc_s - Unwind Library Function Interfaces 11-45. libdl Definition 11-46. libdl - Dynamic Loader Function Interfaces 11-47. libcrypt Definition 11-48. libcrypt - Encryption Function Interfaces 12-1. libz Definition 12-2. libncurses Definition 12-3. libutil Definition 12-4. libutil - Utility Functions Function Interfaces A-1. libc Function Interfaces A-2. libc Data Interfaces A-3. libcrypt Function Interfaces A-4. libdl Function Interfaces A-5. libgcc_s Function Interfaces A-6. libm Function Interfaces A-7. libm Data Interfaces A-8. libpthread Function Interfaces A-9. librt Function Interfaces A-10. libutil Function Interfaces __________________________________________________________ Foreword This is version 3.2 of the Linux Standard Base Core Specification for IA32. This specification is part of a family of specifications under the general title "Linux Standard Base". Developers of applications or implementations interested in using the LSB trademark should see the Linux Foundation Certification Policy for details. __________________________________________________________ Introduction The LSB defines a binary interface for application programs that are compiled and packaged for LSB-conforming implementations on many different hardware architectures. Since a binary specification shall include information specific to the computer processor architecture for which it is intended, it is not possible for a single document to specify the interface for all possible LSB-conforming implementations. Therefore, the LSB is a family of specifications, rather than a single one. This document should be used in conjunction with the documents it references. This document enumerates the system components it includes, but descriptions of those components may be included entirely or partly in this document, partly in other documents, or entirely in other reference documents. For example, the section that describes system service routines includes a list of the system routines supported in this interface, formal declarations of the data structures they use that are visible to applications, and a pointer to the underlying referenced specification for information about the syntax and semantics of each call. Only those routines not described in standards referenced by this document, or extensions to those standards, are described in the detail. Information referenced in this way is as much a part of this document as is the information explicitly included here. The specification carries a version number of either the form x.y or x.y.z. This version number carries the following meaning: * The first number (x) is the major version number. All versions with the same major version number should share binary compatibility. Any addition or deletion of a new library results in a new version number. Interfaces marked as deprecated may be removed from the specification at a major version change. * The second number (y) is the minor version number. Individual interfaces may be added if all certified implementations already had that (previously undocumented) interface. Interfaces may be marked as deprecated at a minor version change. Other minor changes may be permitted at the discretion of the LSB workgroup. * The third number (z), if present, is the editorial level. Only editorial changes should be included in such versions. Since this specification is a descriptive Application Binary Interface, and not a source level API specification, it is not possible to make a guarantee of 100% backward compatibility between major releases. However, it is the intent that those parts of the binary interface that are visible in the source level API will remain backward compatible from version to version, except where a feature marked as "Deprecated" in one release may be removed from a future release. Implementors are strongly encouraged to make use of symbol versioning to permit simultaneous support of applications conforming to different releases of this specification. I. Introductory Elements Table of Contents 1. Scope 1.1. General 1.2. Module Specific Scope 2. References 2.1. Normative References 2.2. Informative References/Bibliography 3. Requirements 3.1. Relevant Libraries 3.2. LSB Implementation Conformance 3.3. LSB Application Conformance 4. Definitions 5. Terminology 6. Documentation Conventions __________________________________________________________ Chapter 1. Scope 1.1. General The Linux Standard Base (LSB) defines a system interface for compiled applications and a minimal environment for support of installation scripts. Its purpose is to enable a uniform industry standard environment for high-volume applications conforming to the LSB. These specifications are composed of two basic parts: A common specification ("LSB-generic" or "generic LSB"), ISO/IEC 23360 Part 1, describing those parts of the interface that remain constant across all implementations of the LSB, and an architecture-specific part ("LSB-arch" or "archLSB") describing the parts of the interface that vary by processor architecture. Together, the LSB-generic and the relevant architecture-specific part of ISO/IEC 23360 for a single hardware architecture provide a complete interface specification for compiled application programs on systems that share a common hardware architecture. ISO/IEC 23360 Part 1, the LSB-generic document, should be used in conjunction with an architecture-specific part. Whenever a section of the LSB-generic specification is supplemented by architecture-specific information, the LSB-generic document includes a reference to the architecture part. Architecture-specific parts of ISO/IEC 23360 may also contain additional information that is not referenced in the LSB-generic document. The LSB contains both a set of Application Program Interfaces (APIs) and Application Binary Interfaces (ABIs). APIs may appear in the source code of portable applications, while the compiled binary of that application may use the larger set of ABIs. A conforming implementation provides all of the ABIs listed here. The compilation system may replace (e.g. by macro definition) certain APIs with calls to one or more of the underlying binary interfaces, and may insert calls to binary interfaces as needed. The LSB is primarily a binary interface definition. Not all of the source level APIs available to applications may be contained in this specification. __________________________________________________________ 1.2. Module Specific Scope This is the IA32 architecture specific Core part of the Linux Standard Base (LSB). This part supplements the generic LSB Core module with those interfaces that differ between architectures. Interfaces described in this part of ISO/IEC 23360 are mandatory except where explicitly listed otherwise. Core interfaces may be supplemented by other modules; all modules are built upon the core. __________________________________________________________ Chapter 2. References 2.1. Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. Note: Where copies of a document are available on the World Wide Web, a Uniform Resource Locator (URL) is given for informative purposes only. This may point to a more recent copy of the referenced specification, or may be out of date. Reference copies of specifications at the revision level indicated may be found at the Linux Foundation's Reference Specifications site. Table 2-1. Normative References Name Title URL ISO/IEC 23360 Part 1 ISO/IEC 23360:2005 Linux Standard Base - Part 1 Generic Specification http://www.linuxbase.org/spec/ Filesystem Hierarchy Standard Filesystem Hierarchy Standard (FHS) 2.3 http://www.pathname.com/fhs/ Intel® Architecture Software Developer's Manual Volume 1 The IA-32 Intel® Architecture Software Developer's Manual Volume 1: Basic Architecture http://developer.intel.com/design/pentium4/manuals/245470.htm Intel® Architecture Software Developer's Manual Volume 2 The IA-32 Intel® Architecture Software Developer's Manual Volume 2: Instruction Set Reference http://developer.intel.com/design/pentium4/manuals/245471.htm Intel® Architecture Software Developer's Manual Volume 3 The IA-32 Intel® Architecture Software Developer's Manual Volume 3: System Programming Guide http://developer.intel.com/design/pentium4/manuals/245472.htm ISO C (1999) ISO/IEC 9899: 1999, Programming Languages --C ISO POSIX (2003) ISO/IEC 9945-1:2003 Information technology -- Portable Operating System Interface (POSIX) -- Part 1: Base Definitions ISO/IEC 9945-2:2003 Information technology -- Portable Operating System Interface (POSIX) -- Part 2: System Interfaces ISO/IEC 9945-3:2003 Information technology -- Portable Operating System Interface (POSIX) -- Part 3: Shell and Utilities ISO/IEC 9945-4:2003 Information technology -- Portable Operating System Interface (POSIX) -- Part 4: Rationale Including Technical Cor. 1: 2004 http://www.unix.org/version3/ Large File Support Large File Support http://www.UNIX-systems.org/version2/whatsnew/lfs20mar.html SUSv2 CAE Specification, January 1997, System Interfaces and Headers (XSH),Issue 5 (ISBN: 1-85912-181-0, C606) http://www.opengroup.org/publications/catalog/un.htm SVID Issue 3 American Telephone and Telegraph Company, System V Interface Definition, Issue 3; Morristown, NJ, UNIX Press, 1989. (ISBN 0201566524) SVID Issue 4 System V Interface Definition, Fourth Edition System V ABI System V Application Binary Interface, Edition 4.1 http://www.caldera.com/developers/devspecs/gabi41.pdf System V ABI Update System V Application Binary Interface - DRAFT - 17 December 2003 http://www.caldera.com/developers/gabi/2003-12-17/contents.html System V ABI, IA32 Supplement System V Application Binary Interface - Intel386 Architecture Processor Supplement, Fourth Edition http://www.caldera.com/developers/devspecs/abi386-4.pdf X/Open Curses CAE Specification, May 1996, X/Open Curses, Issue 4, Version 2 (ISBN: 1-85912-171-3, C610), plus Corrigendum U018 http://www.opengroup.org/publications/catalog/un.htm __________________________________________________________ 2.2. Informative References/Bibliography In addition, the specifications listed below provide essential background information to implementors of this specification. These references are included for information only. Table 2-2. Other References Name Title URL DWARF Debugging Information Format, Revision 2.0.0 DWARF Debugging Information Format, Revision 2.0.0 (July 27, 1993) http://refspecs.linux-foundation.org/dwarf/dwarf-2.0.0.pdf DWARF Debugging Information Format, Revision 3.0.0 (Draft) DWARF Debugging Information Format, Revision 3.0.0 (Draft) http://refspecs.linux-foundation.org/dwarf IEC 60559/IEEE 754 Floating Point IEC 60559:1989 Binary floating-point arithmetic for microprocessor systems http://www.ieee.org/ ISO/IEC TR14652 ISO/IEC Technical Report 14652:2002 Specification method for cultural conventions ITU-T V.42 International Telecommunication Union Recommendation V.42 (2002): Error-correcting procedures for DCEs using asynchronous-to-synchronous conversionITUV http://www.itu.int/rec/recommendation.asp?type=folders&lang=e&p arent=T-REC-V.42 Li18nux Globalization Specification LI18NUX 2000 Globalization Specification, Version 1.0 with Amendment 4 http://www.openi18n.org/docs/html/LI18NUX-2000-amd4.htm Linux Allocated Device Registry LINUX ALLOCATED DEVICES http://www.lanana.org/docs/device-list/devices.txt PAM Open Software Foundation, Request For Comments: 86.0 , October 1995, V. Samar & R.Schemers (SunSoft) http://www.opengroup.org/tech/rfc/mirror-rfc/rfc86.0.txt RFC 1321: The MD5 Message-Digest Algorithm IETF RFC 1321: The MD5 Message-Digest Algorithm http://www.ietf.org/rfc/rfc1321.txt RFC 1831/1832 RPC & XDR IETF RFC 1831 & 1832 http://www.ietf.org/ RFC 1833: Binding Protocols for ONC RPC Version 2 IETF RFC 1833: Binding Protocols for ONC RPC Version 2 http://www.ietf.org/rfc/rfc1833.txt RFC 1950: ZLIB Compressed Data Format Specication IETF RFC 1950: ZLIB Compressed Data Format Specification http://www.ietf.org/rfc/rfc1950.txt RFC 1951: DEFLATE Compressed Data Format Specification IETF RFC 1951: DEFLATE Compressed Data Format Specification version 1.3 http://www.ietf.org/rfc/rfc1951.txt RFC 1952: GZIP File Format Specification IETF RFC 1952: GZIP file format specification version 4.3 http://www.ietf.org/rfc/rfc1952.txt RFC 2440: OpenPGP Message Format IETF RFC 2440: OpenPGP Message Format http://www.ietf.org/rfc/rfc2440.txt RFC 2821:Simple Mail Transfer Protocol IETF RFC 2821: Simple Mail Transfer Protocol http://www.ietf.org/rfc/rfc2821.txt RFC 2822:Internet Message Format IETF RFC 2822: Internet Message Format http://www.ietf.org/rfc/rfc2822.txt RFC 791:Internet Protocol IETF RFC 791: Internet Protocol Specification http://www.ietf.org/rfc/rfc791.txt RPM Package Format RPM Package Format V3.0 http://www.rpm.org/max-rpm/s1-rpm-file-format-rpm-file-format.h tml SUSv2 Commands and Utilities The Single UNIX Specification(SUS) Version 2, Commands and Utilities (XCU), Issue 5 (ISBN: 1-85912-191-8, C604) http://www.opengroup.org/publications/catalog/un.htm zlib Manual zlib 1.2 Manual http://www.gzip.org/zlib/ __________________________________________________________ Chapter 3. Requirements 3.1. Relevant Libraries The libraries listed in Table 3-1 shall be available on IA32 Linux Standard Base systems, with the specified runtime names. These names override or supplement the names specified in the generic LSB (ISO/IEC 23360 Part 1) specification. The specified program interpreter, referred to as proginterp in this table, shall be used to load the shared libraries specified by DT_NEEDED entries at run time. Table 3-1. Standard Library Names Library Runtime Name libm libm.so.6 libdl libdl.so.2 libcrypt libcrypt.so.1 libz libz.so.1 libncurses libncurses.so.5 libutil libutil.so.1 libc libc.so.6 libpthread libpthread.so.0 proginterp /lib/ld-lsb.so.3 libgcc_s libgcc_s.so.1 These libraries will be in an implementation-defined directory which the dynamic linker shall search by default. __________________________________________________________ 3.2. LSB Implementation Conformance A conforming implementation is necessarily architecture specific, and must provide the interfaces specified by both the generic LSB Core specification (ISO/IEC 23360 Part 1) and the relevant architecture specific part of ISO/IEC 23360. Rationale: An implementation must provide at least the interfaces specified in these specifications. It may also provide additional interfaces. A conforming implementation shall satisfy the following requirements: * A processor architecture represents a family of related processors which may not have identical feature sets. The architecture specific parts of ISO/IEC 23360 that supplement this specification for a given target processor architecture describe a minimum acceptable processor. The implementation shall provide all features of this processor, whether in hardware or through emulation transparent to the application. * The implementation shall be capable of executing compiled applications having the format and using the system interfaces described in this document. * The implementation shall provide libraries containing the interfaces specified by this document, and shall provide a dynamic linking mechanism that allows these interfaces to be attached to applications at runtime. All the interfaces shall behave as specified in this document. * The map of virtual memory provided by the implementation shall conform to the requirements of this document. * The implementation's low-level behavior with respect to function call linkage, system traps, signals, and other such activities shall conform to the formats described in this document. * The implementation shall provide all of the mandatory interfaces in their entirety. * The implementation may provide one or more of the optional interfaces. Each optional interface that is provided shall be provided in its entirety. The product documentation shall state which optional interfaces are provided. * The implementation shall provide all files and utilities specified as part of this document in the format defined here and in other referenced documents. All commands and utilities shall behave as required by this document. The implementation shall also provide all mandatory components of an application's runtime environment that are included or referenced in this document. * The implementation, when provided with standard data formats and values at a named interface, shall provide the behavior defined for those values and data formats at that interface. However, a conforming implementation may consist of components which are separately packaged and/or sold. For example, a vendor of a conforming implementation might sell the hardware, operating system, and windowing system as separately packaged items. * The implementation may provide additional interfaces with different names. It may also provide additional behavior corresponding to data values outside the standard ranges, for standard named interfaces. __________________________________________________________ 3.3. LSB Application Conformance A conforming application is necessarily architecture specific, and must conform to both the generic LSB Core specification (ISO/IEC 23360 Part 1)and the relevant architecture specific part of ISO/IEC 23360. A conforming application shall satisfy the following requirements: * Its executable files shall be either shell scripts or object files in the format defined for the Object File Format system interface. * Its object files shall participate in dynamic linking as defined in the Program Loading and Linking System interface. * It shall employ only the instructions, traps, and other low-level facilities defined in the Low-Level System interface as being for use by applications. * If it requires any optional interface defined in this document in order to be installed or to execute successfully, the requirement for that optional interface shall be stated in the application's documentation. * It shall not use any interface or data format that is not required to be provided by a conforming implementation, unless: + If such an interface or data format is supplied by another application through direct invocation of that application during execution, that application shall be in turn an LSB conforming application. + The use of that interface or data format, as well as its source, shall be identified in the documentation of the application. * It shall not use any values for a named interface that are reserved for vendor extensions. A strictly conforming application shall not require or use any interface, facility, or implementation-defined extension that is not defined in this document in order to be installed or to execute successfully. __________________________________________________________ Chapter 4. Definitions For the purposes of this document, the following definitions, as specified in the ISO/IEC Directives, Part 2, 2001, 4th Edition, apply: can be able to; there is a possibility of; it is possible to cannot be unable to; there is no possibilty of; it is not possible to may is permitted; is allowed; is permissible need not it is not required that; no...is required shall is to; is required to; it is required that; has to; only...is permitted; it is necessary shall not is not allowed [permitted] [acceptable] [permissible]; is required to be not; is required that...be not; is not to be should it is recommended that; ought to should not it is not recommended that; ought not to __________________________________________________________ Chapter 5. Terminology For the purposes of this document, the following terms apply: archLSB The architectural part of the LSB Specification which describes the specific parts of the interface that are platform specific. The archLSB is complementary to the gLSB. Binary Standard The total set of interfaces that are available to be used in the compiled binary code of a conforming application. gLSB The common part of the LSB Specification that describes those parts of the interface that remain constant across all hardware implementations of the LSB. implementation-defined Describes a value or behavior that is not defined by this document but is selected by an implementor. The value or behavior may vary among implementations that conform to this document. An application should not rely on the existence of the value or behavior. An application that relies on such a value or behavior cannot be assured to be portable across conforming implementations. The implementor shall document such a value or behavior so that it can be used correctly by an application. Shell Script A file that is read by an interpreter (e.g., awk). The first line of the shell script includes a reference to its interpreter binary. Source Standard The set of interfaces that are available to be used in the source code of a conforming application. undefined Describes the nature of a value or behavior not defined by this document which results from use of an invalid program construct or invalid data input. The value or behavior may vary among implementations that conform to this document. An application should not rely on the existence or validity of the value or behavior. An application that relies on any particular value or behavior cannot be assured to be portable across conforming implementations. unspecified Describes the nature of a value or behavior not specified by this document which results from use of a valid program construct or valid data input. The value or behavior may vary among implementations that conform to this document. An application should not rely on the existence or validity of the value or behavior. An application that relies on any particular value or behavior cannot be assured to be portable across conforming implementations. Other terms and definitions used in this document shall have the same meaning as defined in Chapter 3 of the Base Definitions volume of ISO POSIX (2003). __________________________________________________________ Chapter 6. Documentation Conventions Throughout this document, the following typographic conventions are used: function() the name of a function command the name of a command or utility CONSTANT a constant value parameter a parameter variable a variable Throughout this specification, several tables of interfaces are presented. Each entry in these tables has the following format: name the name of the interface (symver) An optional symbol version identifier, if required. [refno] A reference number indexing the table of referenced specifications that follows this table. For example, forkpty(GLIBC_2.0) [SUSv3] refers to the interface named forkpty() with symbol version GLIBC_2.0 that is defined in the SUSv3 reference. Note: Symbol versions are defined in the architecture specific parts of ISO/IEC 23360 only. II. Executable and Linking Format (ELF) Table of Contents 7. Introduction 8. Low Level System Information 8.1. Machine Interface 8.1.1. Processor Architecture 8.1.2. Data Representation 8.2. Function Calling Sequence 8.2.1. Registers 8.2.2. Floating Point Registers 8.2.3. Stack Frame 8.2.4. Arguments 8.2.5. Return Values 8.3. Operating System Interface 8.3.1. Virtual Address Space 8.3.2. Processor Execution Mode 8.3.3. Exception Interface 8.3.4. Signal Delivery 8.4. Process Initialization 8.4.1. Special Registers 8.4.2. Process Stack (on entry) 8.4.3. Auxilliary Vector 8.4.4. Environment 8.5. Coding Examples 8.5.1. Introduction 8.5.2. Code Model Overview/Architecture Constraints 8.5.3. Position-Independent Function Prologue 8.5.4. Data Objects 8.5.5. Function Calls 8.5.6. Branching 8.6. C Stack Frame 8.6.1. Variable Argument List 8.6.2. Dynamic Allocation of Stack Space 8.7. Debug Information 9. Object Format 9.1. Introduction 9.2. ELF Header 9.2.1. Machine Information 9.3. Special Sections 9.3.1. Special Sections 9.4. Symbol Table 9.5. Relocation 9.5.1. Introduction 9.5.2. Relocation Types 10. Program Loading and Dynamic Linking 10.1. Introduction 10.2. Program Header 10.2.1. Introduction 10.2.2. Types 10.2.3. Flags 10.3. Program Loading 10.4. Dynamic Linking 10.4.1. Dynamic Section 10.4.2. Global Offset Table 10.4.3. Shared Object Dependencies 10.4.4. Function Addresses 10.4.5. Procedure Linkage Table 10.4.6. Initialization and Termination Functions __________________________________________________________ Chapter 7. Introduction Executable and Linking Format (ELF) defines the object format for compiled applications. This specification supplements the information found in System V ABI Update and System V ABI, IA32 Supplement, and is intended to document additions made since the publication of that document. __________________________________________________________ Chapter 8. Low Level System Information 8.1. Machine Interface 8.1.1. Processor Architecture The IA32 Architecture is specified by the following documents * Intel® Architecture Software Developer's Manual Volume 1 * Intel® Architecture Software Developer's Manual Volume 2 * Intel® Architecture Software Developer's Manual Volume 3 Only the features of the Intel486 processor instruction set may be assumed to be present. An application should determine if any additional instruction set features are available before using those additional features. If a feature is not present, then a conforming application shall not use it. Conforming applications may use only instructions which do not require elevated privileges. Conforming applications shall not invoke the implementations underlying system call interface directly. The interfaces in the implementation base libraries shall be used instead. Rationale: Implementation-supplied base libraries may use the system call interface but applications must not assume any particular operating system or kernel version is present. Applications conforming to this specification shall provide feedback to the user if a feature that is required for correct execution of the application is not present. Applications conforming to this specification should attempt to execute in a diminished capacity if a required instruction set feature is not present. This specification does not provide any performance guarantees of a conforming system. A system conforming to this specification may be implemented in either hardware or software. __________________________________________________________ 8.1.2. Data Representation LSB-conforming applications shall use the data representation as defined in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.1.2.1. Byte Ordering LSB-conforming systems and applications shall use the bit and byte ordering rules specified in Section 1.3.1 of the Intel® Architecture Software Developer's Manual Volume 1. __________________________________________________________ 8.1.2.2. Fundamental Types In addition to the fundamental types specified in Chapter 3 of the System V ABI, IA32 Supplement, a 64 bit data type is defined here. Table 8-1. Scalar Types Type C sizeof Alignment (bytes) Intel386 Architecture Integral long long 8 4 signed double word signed long long unsigned long long 8 4 unsigned double word __________________________________________________________ 8.1.2.3. Aggregates and Unions LSB-conforming implementations shall support aggregates and unions with alignment and padding as specified in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.1.2.4. Bit Fields LSB-conforming implementations shall support structure and union definitions that include bit-fields as specified in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.2. Function Calling Sequence LSB-conforming applications shall use the function calling sequence as defined in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.2.1. Registers LSB-conforming applications shall use the general registers provided by the architecture in the manner described in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.2.2. Floating Point Registers LSB-conforming applications shall use the floating point registers provided by the architecture in the manner described in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.2.3. Stack Frame LSB-conforming applications shall use the stack frame in the manner specified in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.2.4. Arguments 8.2.4.1. Integral/Pointer Integral and pointer arguments to functions shall be passed as specified in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.2.4.2. Floating Point Floating point arguments to functions shall be passed as specified in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.2.4.3. Struct and Union Arguments Structure and union arguments to functions shall be passed as specified in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.2.4.4. Variable Arguments As described in Chapter 3 of the System V ABI, IA32 Supplement, LSB-conforming applications using variable argument lists shall use the facilities defined in the header file to deal with variable argument lists. Note: This is a requirement of ISO C (1999) and ISO POSIX (2003) as well as System V ABI, IA32 Supplement. __________________________________________________________ 8.2.5. Return Values 8.2.5.1. Void As described in chapter 3 of System V ABI, IA32 Supplement, functions returning no value need not set any register to any particular value. __________________________________________________________ 8.2.5.2. Integral/Pointer Functions return scalar values (integer or pointer), shall do so as specified in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.2.5.3. Floating Point Functions return floating point values shall do so as specified in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.2.5.4. Struct and Union Functions that return a structure or union shall do so as specified in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.3. Operating System Interface LSB-conforming applications shall use the following aspects of the Operating System Interfaces as defined in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.3.1. Virtual Address Space LSB-conforming implementations shall support the virtual address space described in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.3.1.1. Page Size LSB-conforming applications should call sysconf() to determine the current page size. See also Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.3.1.2. Virtual Address Assignments LSB-conforming systems shall provide the virtual address space configuration as described in Chapter 3 of the System V ABI, IA32 Supplement (Virtual Address Assignments). __________________________________________________________ 8.3.1.3. Managing the Process Stack LSB-conforming systems shall manage the process stack as specified in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.3.1.4. Coding Guidlines LSB-conforming applications should follow the coding guidleines provided in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.3.2. Processor Execution Mode LSB-conforming applications shall run in the user-mode ring as described in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.3.3. Exception Interface 8.3.3.1. Introduction LSB-conforming system shall provide the exception interface described in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.3.3.2. Hardware Exception Types LSB-conforming systems shall map hardware exceptions to signals as described in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.3.3.3. Software Trap Types Software generated traps are subject to the limitations described in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.3.4. Signal Delivery There are no architecture specific requirements for signal delivery. __________________________________________________________ 8.3.4.1. Signal Handler Interface There are no architecture specific requirements for the signal handler interface. __________________________________________________________ 8.4. Process Initialization An LSB-conforming implementation shall cause an application to be initialized as described in the Process Initialization section of Chapter 3 of the System V ABI, IA32 Supplement, and as described below. __________________________________________________________ 8.4.1. Special Registers The special registers shall be initialized as described in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.4.2. Process Stack (on entry) The process stack shall be initialized as described in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.4.3. Auxilliary Vector The auxilliary vector shall be initialized as described in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.4.4. Environment There are no architecture specific requirements for environment initialization. __________________________________________________________ 8.5. Coding Examples 8.5.1. Introduction LSB-conforming applications may follow the coding examples provdied in chapter 3 of the System V ABI, IA32 Supplement in order to implement certain fundamental operations. __________________________________________________________ 8.5.2. Code Model Overview/Architecture Constraints Chapter 3 of the System V ABI, IA32 Supplement provides an overview of the code model. __________________________________________________________ 8.5.3. Position-Independent Function Prologue LSB-conforming applications using position independent functions may use the techniques described in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.5.4. Data Objects LSB-conforming applications accessing non-stack resident data objects may do so as described in Chapter 3 of the System V ABI, IA32 Supplement, including both absolute and position independent data access techniques. __________________________________________________________ 8.5.5. Function Calls 8.5.5.1. Absolute Direct Function Call LSB-conforming applications using direct function calls with absolute addressing may follow the examples given in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.5.5.2. Absolute Indirect Function Call LSB-conforming applications using indirect function calls with absolute addressing may follow the examples given in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.5.5.3. Position-Independent Direct Function Call LSB-conforming applications using direct function calls with position independent addressing may follow the examples given in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.5.5.4. Position-Independent Indirect Function Call LSB-conforming applications using indirect function calls with position independent addressing may follow the examples given in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.5.6. Branching LSB-conforming applications may follow the branching examples given in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.6. C Stack Frame 8.6.1. Variable Argument List As described in Chapter 3 of the System V ABI, IA32 Supplement, LSB-conforming applications using variable argument lists shall use the facilities defined in the header file to deal with variable argument lists. Note: This is a requirement of ISO C (1999) and ISO POSIX (2003) as well as System V ABI, IA32 Supplement. __________________________________________________________ 8.6.2. Dynamic Allocation of Stack Space LSB-conforming applications may allocate space using the stack following the examples given in Chapter 3 of the System V ABI, IA32 Supplement. __________________________________________________________ 8.7. Debug Information There are no architecture specific requirements for debugging information for this architecture. LSB-conforming applications may utilize DWARF sections as described in the generic specification. __________________________________________________________ Chapter 9. Object Format 9.1. Introduction LSB-conforming implementations shall support an object file format, called Executable and Linking Format (ELF) as defined by the System V ABI , System V ABI Update , System V ABI, IA32 Supplement and as supplemented by the ISO/IEC 23360 Part 1 and the generic LSB specification. __________________________________________________________ 9.2. ELF Header 9.2.1. Machine Information LSB-conforming applications shall use the Machine Information as defined in Chapter 4 of the System V ABI, IA32 Supplement, including the e_ident array members for EI_CLASS and EI_DATA, the processor identification in e_machine and flags in e_flags. The operating system identification field, in e_ident[EI_OSABI] shall be ELFOSABI_NONE (0). __________________________________________________________ 9.3. Special Sections 9.3.1. Special Sections Various sections hold program and control information. Sections in the lists below are used by the system and have the indicated types and attributes. __________________________________________________________ 9.3.1.1. ELF Special Sections The following sections are defined in Chapter 4 of the System V ABI, IA32 Supplement. Table 9-1. ELF Special Sections Name Type Attributes .got SHT_PROGBITS SHF_ALLOC+SHF_WRITE .plt SHT_PROGBITS SHF_ALLOC+SHF_EXECINSTR .got This section holds the global offset table. See `Coding Examples' in Chapter 3, `Special Sections' in Chapter 4, and `Global Offset Table' in Chapter 5 of the processor supplement for more information. .plt This section holds the procedure linkage table. __________________________________________________________ 9.3.1.2. Additional Special Sections The following additional sections are defined here. Table 9-2. Additional Special Sections Name Type Attributes .rel.dyn SHT_REL SHF_ALLOC .rel.dyn This section holds relocation information, as described in `Relocation' section in Chapter 4 of System V ABI Update. These relocations are applied to the .dyn section. __________________________________________________________ 9.4. Symbol Table LSB-conforming applications shall use the Symbol Table section as defined in Chapter 4 of the System V ABI, IA32 Supplement. __________________________________________________________ 9.5. Relocation 9.5.1. Introduction LSB-conforming implementations shall support Relocation as defined in Chapter 4 of the System V ABI, IA32 Supplement and as described below. __________________________________________________________ 9.5.2. Relocation Types The relocation types described in Chapter 4 of the System V ABI, IA32 Supplement shall be supported. __________________________________________________________ Chapter 10. Program Loading and Dynamic Linking 10.1. Introduction LSB-conforming implementations shall support the object file information and system actions that create running programs as specified in the System V ABI , System V ABI Update , System V ABI, IA32 Supplement and as supplemented by ISO/IEC 23360 Part 1 and the generic LSB specification. __________________________________________________________ 10.2. Program Header 10.2.1. Introduction As described in System V ABI Update, the program header is an array of structures, each describing a segment or other information the system needs to prepare the program for execution. __________________________________________________________ 10.2.2. Types The IA32 architecture does not define any additional program header types beyond those required in the generic LSB Core specification. __________________________________________________________ 10.2.3. Flags The IA32 architecture does not define any additional program header flags beyond those required in the generic LSB Core specification. __________________________________________________________ 10.3. Program Loading LSB-conforming systems shall support program loading as defined in Chapter 5 of the System V ABI, IA32 Supplement. __________________________________________________________ 10.4. Dynamic Linking LSB-conforming systems shall support dynamic linking as defined in Chapter 5 of the System V ABI, IA32 Supplement. __________________________________________________________ 10.4.1. Dynamic Section The following dynamic entries are defined in the System V ABI, IA32 Supplement. DT_PLTGOT On the Intel386 architecture, this entrys d_ptr member gives the address of the first entry in the global offset table. __________________________________________________________ 10.4.2. Global Offset Table LSB-conforming implementations shall support use of the global offset table as described in Chapter 5 of the System V ABI, IA32 Supplement. __________________________________________________________ 10.4.3. Shared Object Dependencies There are no architecture specific requirements for shared object dependencies; see the generic LSB-Core specification. __________________________________________________________ 10.4.4. Function Addresses Function addresses shall behave as specified in Chapter 5 of the System V ABI, IA32 Supplement. __________________________________________________________ 10.4.5. Procedure Linkage Table LSB-conforming implementations shall support a Procedure Linkage Table as described in Chapter 5 of the System V ABI, IA32 Supplement. __________________________________________________________ 10.4.6. Initialization and Termination Functions There are no architecture specific requirements for initialization and termination functions; see the generic LSB-Core specification. III. Base Libraries Table of Contents 11. Libraries 11.1. Program Interpreter/Dynamic Linker 11.2. Interfaces for libc 11.2.1. RPC 11.2.2. System Calls 11.2.3. Standard I/O 11.2.4. Signal Handling 11.2.5. Localization Functions 11.2.6. Posix Spawn Option 11.2.7. Posix Advisory Option 11.2.8. Socket Interface 11.2.9. Wide Characters 11.2.10. String Functions 11.2.11. IPC Functions 11.2.12. Regular Expressions 11.2.13. Character Type Functions 11.2.14. Time Manipulation 11.2.15. Terminal Interface Functions 11.2.16. System Database Interface 11.2.17. Language Support 11.2.18. Large File Support 11.2.19. Standard Library 11.3. Data Definitions for libc 11.3.1. ctype.h 11.3.2. dirent.h 11.3.3. errno.h 11.3.4. fcntl.h 11.3.5. fnmatch.h 11.3.6. ftw.h 11.3.7. getopt.h 11.3.8. glob.h 11.3.9. iconv.h 11.3.10. langinfo.h 11.3.11. limits.h 11.3.12. locale.h 11.3.13. net/if.h 11.3.14. netdb.h 11.3.15. netinet/in.h 11.3.16. netinet/ip.h 11.3.17. netinet/tcp.h 11.3.18. netinet/udp.h 11.3.19. nl_types.h 11.3.20. pwd.h 11.3.21. regex.h 11.3.22. rpc/auth.h 11.3.23. rpc/clnt.h 11.3.24. rpc/rpc_msg.h 11.3.25. rpc/svc.h 11.3.26. rpc/types.h 11.3.27. rpc/xdr.h 11.3.28. sched.h 11.3.29. search.h 11.3.30. setjmp.h 11.3.31. signal.h 11.3.32. spawn.h 11.3.33. stddef.h 11.3.34. stdint.h 11.3.35. stdio.h 11.3.36. stdlib.h 11.3.37. sys/file.h 11.3.38. sys/ioctl.h 11.3.39. sys/ipc.h 11.3.40. sys/mman.h 11.3.41. sys/msg.h 11.3.42. sys/param.h 11.3.43. sys/poll.h 11.3.44. sys/resource.h 11.3.45. sys/sem.h 11.3.46. sys/shm.h 11.3.47. sys/socket.h 11.3.48. sys/stat.h 11.3.49. sys/statfs.h 11.3.50. sys/statvfs.h 11.3.51. sys/time.h 11.3.52. sys/timeb.h 11.3.53. sys/times.h 11.3.54. sys/types.h 11.3.55. sys/un.h 11.3.56. sys/utsname.h 11.3.57. sys/wait.h 11.3.58. syslog.h 11.3.59. termios.h 11.3.60. ucontext.h 11.3.61. ulimit.h 11.3.62. unistd.h 11.3.63. utime.h 11.3.64. utmp.h 11.3.65. utmpx.h 11.3.66. wctype.h 11.3.67. wordexp.h 11.4. Interfaces for libm 11.4.1. Math 11.5. Data Definitions for libm 11.5.1. complex.h 11.5.2. fenv.h 11.5.3. math.h 11.6. Interface Definitions for libm __fpclassifyl -- Classify real floating type 11.7. Interfaces for libpthread 11.7.1. Realtime Threads 11.7.2. Advanced Realtime Threads 11.7.3. Posix Threads 11.7.4. Thread aware versions of libc interfaces 11.8. Data Definitions for libpthread 11.8.1. pthread.h 11.8.2. semaphore.h 11.9. Interfaces for libgcc_s 11.9.1. Unwind Library 11.10. Data Definitions for libgcc_s 11.10.1. unwind.h 11.11. Interface Definitions for libgcc_s _Unwind_DeleteException -- private C++ error handling method _Unwind_Find_FDE -- private C++ error handling method _Unwind_ForcedUnwind -- private C++ error handling method _Unwind_GetDataRelBase -- private IA64 C++ error handling method _Unwind_GetGR -- private C++ error handling method _Unwind_GetIP -- private C++ error handling method _Unwind_GetLanguageSpecificData -- private C++ error handling method _Unwind_GetRegionStart -- private C++ error handling method _Unwind_GetTextRelBase -- private IA64 C++ error handling method _Unwind_RaiseException -- private C++ error handling method _Unwind_Resume -- private C++ error handling method _Unwind_SetGR -- private C++ error handling method _Unwind_SetIP -- private C++ error handling method 11.12. Interfaces for libdl 11.12.1. Dynamic Loader 11.13. Data Definitions for libdl 11.13.1. dlfcn.h 11.14. Interfaces for libcrypt 11.14.1. Encryption __________________________________________________________ Chapter 11. Libraries An LSB-conforming implementation shall support some base libraries which provide interfaces for accessing the operating system, processor and other hardware in the system. Interfaces that are unique to the IA32 platform are defined here. This section should be used in conjunction with the corresponding section in the Linux Standard Base Specification. __________________________________________________________ 11.1. Program Interpreter/Dynamic Linker The Program Interpreter shall be /lib/ld-lsb.so.3. __________________________________________________________ 11.2. Interfaces for libc Table 11-1 defines the library name and shared object name for the libc library Table 11-1. libc Definition Library: libc SONAME: libc.so.6 The behavior of the interfaces in this library is specified by the following specifications: [LFS] Large File Support [LSB] ISO/IEC 23360 Part 1 [SUSv2] SUSv2 [SUSv3] ISO POSIX (2003) [SVID.3] SVID Issue 3 [SVID.4] SVID Issue 4 __________________________________________________________ 11.2.1. RPC __________________________________________________________ 11.2.1.1. Interfaces for RPC An LSB conforming implementation shall provide the architecture specific functions for RPC specified in Table 11-2, with the full mandatory functionality as described in the referenced underlying specification. Table 11-2. libc - RPC Function Interfaces authnone_create(GLIBC_2.0) [SVID.4] clnt_create(GLIBC_2.0) [SVID.4] clnt_pcreateerror(GLIBC_2.0) [SVID.4] clnt_perrno(GLIBC_2.0) [SVID.4] clnt_perror(GLIBC_2.0) [SVID.4] clnt_spcreateerror(GLIBC_2.0) [SVID.4] clnt_sperrno(GLIBC_2.0) [SVID.4] clnt_sperror(GLIBC_2.0) [SVID.4] key_decryptsession(GLIBC_2.1) [SVID.3] pmap_getport(GLIBC_2.0) [LSB] pmap_set(GLIBC_2.0) [LSB] pmap_unset(GLIBC_2.0) [LSB] svc_getreqset(GLIBC_2.0) [SVID.3] svc_register(GLIBC_2.0) [LSB] svc_run(GLIBC_2.0) [LSB] svc_sendreply(GLIBC_2.0) [LSB] svcerr_auth(GLIBC_2.0) [SVID.3] svcerr_decode(GLIBC_2.0) [SVID.3] svcerr_noproc(GLIBC_2.0) [SVID.3] svcerr_noprog(GLIBC_2.0) [SVID.3] svcerr_progvers(GLIBC_2.0) [SVID.3] svcerr_systemerr(GLIBC_2.0) [SVID.3] svcerr_weakauth(GLIBC_2.0) [SVID.3] svctcp_create(GLIBC_2.0) [LSB] svcudp_create(GLIBC_2.0) [LSB] xdr_accepted_reply(GLIBC_2.0) [SVID.3] xdr_array(GLIBC_2.0) [SVID.3] xdr_bool(GLIBC_2.0) [SVID.3] xdr_bytes(GLIBC_2.0) [SVID.3] xdr_callhdr(GLIBC_2.0) [SVID.3] xdr_callmsg(GLIBC_2.0) [SVID.3] xdr_char(GLIBC_2.0) [SVID.3] xdr_double(GLIBC_2.0) [SVID.3] xdr_enum(GLIBC_2.0) [SVID.3] xdr_float(GLIBC_2.0) [SVID.3] xdr_free(GLIBC_2.0) [SVID.3] xdr_int(GLIBC_2.0) [SVID.3] xdr_long(GLIBC_2.0) [SVID.3] xdr_opaque(GLIBC_2.0) [SVID.3] xdr_opaque_auth(GLIBC_2.0) [SVID.3] xdr_pointer(GLIBC_2.0) [SVID.3] xdr_reference(GLIBC_2.0) [SVID.3] xdr_rejected_reply(GLIBC_2.0) [SVID.3] xdr_replymsg(GLIBC_2.0) [SVID.3] xdr_short(GLIBC_2.0) [SVID.3] xdr_string(GLIBC_2.0) [SVID.3] xdr_u_char(GLIBC_2.0) [SVID.3] xdr_u_int(GLIBC_2.0) [LSB] xdr_u_long(GLIBC_2.0) [SVID.3] xdr_u_short(GLIBC_2.0) [SVID.3] xdr_union(GLIBC_2.0) [SVID.3] xdr_vector(GLIBC_2.0) [SVID.3] xdr_void(GLIBC_2.0) [SVID.3] xdr_wrapstring(GLIBC_2.0) [SVID.3] xdrmem_create(GLIBC_2.0) [SVID.3] xdrrec_create(GLIBC_2.0) [SVID.3] xdrrec_eof(GLIBC_2.0) [SVID.3] xdrstdio_create(GLIBC_2.0) [LSB] __________________________________________________________ 11.2.2. System Calls __________________________________________________________ 11.2.2.1. Interfaces for System Calls An LSB conforming implementation shall provide the architecture specific functions for System Calls specified in Table 11-3, with the full mandatory functionality as described in the referenced underlying specification. Table 11-3. libc - System Calls Function Interfaces __fxstat(GLIBC_2.0) [LSB] __getpgid(GLIBC_2.0) [LSB] __lxstat(GLIBC_2.0) [LSB] __xmknod(GLIBC_2.0) [LSB] __xstat(GLIBC_2.0) [LSB] access(GLIBC_2.0) [SUSv3] acct(GLIBC_2.0) [LSB] alarm(GLIBC_2.0) [SUSv3] brk(GLIBC_2.0) [SUSv2] chdir(GLIBC_2.0) [SUSv3] chmod(GLIBC_2.0) [SUSv3] chown(GLIBC_2.1) [SUSv3] chroot(GLIBC_2.0) [SUSv2] clock(GLIBC_2.0) [SUSv3] close(GLIBC_2.0) [SUSv3] closedir(GLIBC_2.0) [SUSv3] creat(GLIBC_2.0) [SUSv3] dup(GLIBC_2.0) [SUSv3] dup2(GLIBC_2.0) [SUSv3] execl(GLIBC_2.0) [SUSv3] execle(GLIBC_2.0) [SUSv3] execlp(GLIBC_2.0) [SUSv3] execv(GLIBC_2.0) [SUSv3] execve(GLIBC_2.0) [SUSv3] execvp(GLIBC_2.0) [SUSv3] exit(GLIBC_2.0) [SUSv3] fchdir(GLIBC_2.0) [SUSv3] fchmod(GLIBC_2.0) [SUSv3] fchown(GLIBC_2.0) [SUSv3] fcntl(GLIBC_2.0) [LSB] fdatasync(GLIBC_2.0) [SUSv3] flock(GLIBC_2.0) [LSB] fork(GLIBC_2.0) [SUSv3] fstatfs(GLIBC_2.0) [LSB] fstatvfs(GLIBC_2.1) [SUSv3] fsync(GLIBC_2.0) [SUSv3] ftime(GLIBC_2.0) [SUSv3] ftruncate(GLIBC_2.0) [SUSv3] getcontext(GLIBC_2.1) [SUSv3] getdtablesize(GLIBC_2.0) [LSB] getegid(GLIBC_2.0) [SUSv3] geteuid(GLIBC_2.0) [SUSv3] getgid(GLIBC_2.0) [SUSv3] getgroups(GLIBC_2.0) [SUSv3] getitimer(GLIBC_2.0) [SUSv3] getloadavg(GLIBC_2.2) [LSB] getpagesize(GLIBC_2.0) [LSB] getpgid(GLIBC_2.0) [SUSv3] getpgrp(GLIBC_2.0) [SUSv3] getpid(GLIBC_2.0) [SUSv3] getppid(GLIBC_2.0) [SUSv3] getpriority(GLIBC_2.0) [SUSv3] getrlimit(GLIBC_2.2) [SUSv3] getrusage(GLIBC_2.0) [SUSv3] getsid(GLIBC_2.0) [SUSv3] getuid(GLIBC_2.0) [SUSv3] getwd(GLIBC_2.0) [SUSv3] initgroups(GLIBC_2.0) [LSB] ioctl(GLIBC_2.0) [LSB] kill(GLIBC_2.0) [LSB] killpg(GLIBC_2.0) [SUSv3] lchown(GLIBC_2.0) [SUSv3] link(GLIBC_2.0) [LSB] lockf(GLIBC_2.0) [SUSv3] lseek(GLIBC_2.0) [SUSv3] mkdir(GLIBC_2.0) [SUSv3] mkfifo(GLIBC_2.0) [SUSv3] mlock(GLIBC_2.0) [SUSv3] mlockall(GLIBC_2.0) [SUSv3] mmap(GLIBC_2.0) [SUSv3] mprotect(GLIBC_2.0) [SUSv3] mremap(GLIBC_2.0) [LSB] msync(GLIBC_2.0) [SUSv3] munlock(GLIBC_2.0) [SUSv3] munlockall(GLIBC_2.0) [SUSv3] munmap(GLIBC_2.0) [SUSv3] nanosleep(GLIBC_2.0) [SUSv3] nice(GLIBC_2.0) [SUSv3] open(GLIBC_2.0) [SUSv3] opendir(GLIBC_2.0) [SUSv3] pathconf(GLIBC_2.0) [SUSv3] pause(GLIBC_2.0) [SUSv3] pipe(GLIBC_2.0) [SUSv3] poll(GLIBC_2.0) [SUSv3] pselect(GLIBC_2.0) [SUSv3] read(GLIBC_2.0) [SUSv3] readdir(GLIBC_2.0) [SUSv3] readdir_r(GLIBC_2.0) [SUSv3] readlink(GLIBC_2.0) [SUSv3] readv(GLIBC_2.0) [SUSv3] rename(GLIBC_2.0) [SUSv3] rmdir(GLIBC_2.0) [SUSv3] sbrk(GLIBC_2.0) [SUSv2] sched_get_priority_max(GLIBC_2.0) [SUSv3] sched_get_priority_min(GLIBC_2.0) [SUSv3] sched_getparam(GLIBC_2.0) [SUSv3] sched_getscheduler(GLIBC_2.0) [SUSv3] sched_rr_get_interval(GLIBC_2.0) [SUSv3] sched_setparam(GLIBC_2.0) [SUSv3] sched_setscheduler(GLIBC_2.0) [LSB] sched_yield(GLIBC_2.0) [SUSv3] select(GLIBC_2.0) [SUSv3] setcontext(GLIBC_2.0) [SUSv3] setegid(GLIBC_2.0) [SUSv3] seteuid(GLIBC_2.0) [SUSv3] setgid(GLIBC_2.0) [SUSv3] setitimer(GLIBC_2.0) [SUSv3] setpgid(GLIBC_2.0) [SUSv3] setpgrp(GLIBC_2.0) [SUSv3] setpriority(GLIBC_2.0) [SUSv3] setregid(GLIBC_2.0) [SUSv3] setreuid(GLIBC_2.0) [SUSv3] setrlimit(GLIBC_2.2) [SUSv3] setrlimit64(GLIBC_2.1) [LFS] setsid(GLIBC_2.0) [SUSv3] setuid(GLIBC_2.0) [SUSv3] sleep(GLIBC_2.0) [SUSv3] statfs(GLIBC_2.0) [LSB] statvfs(GLIBC_2.1) [SUSv3] stime(GLIBC_2.0) [LSB] symlink(GLIBC_2.0) [SUSv3] sync(GLIBC_2.0) [SUSv3] sysconf(GLIBC_2.0) [LSB] time(GLIBC_2.0) [SUSv3] times(GLIBC_2.0) [SUSv3] truncate(GLIBC_2.0) [SUSv3] ulimit(GLIBC_2.0) [SUSv3] umask(GLIBC_2.0) [SUSv3] uname(GLIBC_2.0) [SUSv3] unlink(GLIBC_2.0) [LSB] utime(GLIBC_2.0) [SUSv3] utimes(GLIBC_2.0) [SUSv3] vfork(GLIBC_2.0) [SUSv3] wait(GLIBC_2.0) [SUSv3] wait4(GLIBC_2.0) [LSB] waitid(GLIBC_2.1) [SUSv3] waitpid(GLIBC_2.0) [LSB] write(GLIBC_2.0) [SUSv3] writev(GLIBC_2.0) [SUSv3] An LSB conforming implementation shall provide the architecture specific deprecated functions for System Calls specified in Table 11-4, with the full mandatory functionality as described in the referenced underlying specification. Note: These interfaces are deprecated, and applications should avoid using them. These interfaces may be withdrawn in future releases of this specification. Table 11-4. libc - System Calls Deprecated Function Interfaces fstatfs(GLIBC_2.0) [LSB] getdtablesize(GLIBC_2.0) [LSB] getpagesize(GLIBC_2.0) [LSB] getwd(GLIBC_2.0) [SUSv3] statfs(GLIBC_2.0) [LSB] __________________________________________________________ 11.2.3. Standard I/O __________________________________________________________ 11.2.3.1. Interfaces for Standard I/O An LSB conforming implementation shall provide the architecture specific functions for Standard I/O specified in Table 11-5, with the full mandatory functionality as described in the referenced underlying specification. Table 11-5. libc - Standard I/O Function Interfaces _IO_feof(GLIBC_2.0) [LSB] _IO_getc(GLIBC_2.0) [LSB] _IO_putc(GLIBC_2.0) [LSB] _IO_puts(GLIBC_2.0) [LSB] asprintf(GLIBC_2.0) [LSB] clearerr(GLIBC_2.0) [SUSv3] ctermid(GLIBC_2.0) [SUSv3] fclose(GLIBC_2.1) [SUSv3] fdopen(GLIBC_2.1) [SUSv3] feof(GLIBC_2.0) [SUSv3] ferror(GLIBC_2.0) [SUSv3] fflush(GLIBC_2.0) [SUSv3] fflush_unlocked(GLIBC_2.0) [LSB] fgetc(GLIBC_2.0) [SUSv3] fgetpos(GLIBC_2.2) [SUSv3] fgets(GLIBC_2.0) [SUSv3] fgetwc_unlocked(GLIBC_2.2) [LSB] fileno(GLIBC_2.0) [SUSv3] flockfile(GLIBC_2.0) [SUSv3] fopen(GLIBC_2.1) [SUSv3] fprintf(GLIBC_2.0) [SUSv3] fputc(GLIBC_2.0) [SUSv3] fputs(GLIBC_2.0) [SUSv3] fread(GLIBC_2.0) [SUSv3] freopen(GLIBC_2.0) [SUSv3] fscanf(GLIBC_2.0) [LSB] fseek(GLIBC_2.0) [SUSv3] fseeko(GLIBC_2.1) [SUSv3] fsetpos(GLIBC_2.2) [SUSv3] ftell(GLIBC_2.0) [SUSv3] ftello(GLIBC_2.1) [SUSv3] fwrite(GLIBC_2.0) [SUSv3] getc(GLIBC_2.0) [SUSv3] getc_unlocked(GLIBC_2.0) [SUSv3] getchar(GLIBC_2.0) [SUSv3] getchar_unlocked(GLIBC_2.0) [SUSv3] getw(GLIBC_2.0) [SUSv2] pclose(GLIBC_2.1) [SUSv3] popen(GLIBC_2.1) [SUSv3] printf(GLIBC_2.0) [SUSv3] putc(GLIBC_2.0) [SUSv3] putc_unlocked(GLIBC_2.0) [SUSv3] putchar(GLIBC_2.0) [SUSv3] putchar_unlocked(GLIBC_2.0) [SUSv3] puts(GLIBC_2.0) [SUSv3] putw(GLIBC_2.0) [SUSv2] remove(GLIBC_2.0) [SUSv3] rewind(GLIBC_2.0) [SUSv3] rewinddir(GLIBC_2.0) [SUSv3] scanf(GLIBC_2.0) [LSB] seekdir(GLIBC_2.0) [SUSv3] setbuf(GLIBC_2.0) [SUSv3] setbuffer(GLIBC_2.0) [LSB] setvbuf(GLIBC_2.0) [SUSv3] snprintf(GLIBC_2.0) [SUSv3] sprintf(GLIBC_2.0) [SUSv3] sscanf(GLIBC_2.0) [LSB] telldir(GLIBC_2.0) [SUSv3] tempnam(GLIBC_2.0) [SUSv3] ungetc(GLIBC_2.0) [SUSv3] vasprintf(GLIBC_2.0) [LSB] vdprintf(GLIBC_2.0) [LSB] vfprintf(GLIBC_2.0) [SUSv3] vprintf(GLIBC_2.0) [SUSv3] vsnprintf(GLIBC_2.0) [SUSv3] vsprintf(GLIBC_2.0) [SUSv3] An LSB conforming implementation shall provide the architecture specific data interfaces for Standard I/O specified in Table 11-6, with the full mandatory functionality as described in the referenced underlying specification. Table 11-6. libc - Standard I/O Data Interfaces stderr(GLIBC_2.0) [SUSv3] stdin(GLIBC_2.0) [SUSv3] stdout(GLIBC_2.0) [SUSv3] __________________________________________________________ 11.2.4. Signal Handling __________________________________________________________ 11.2.4.1. Interfaces for Signal Handling An LSB conforming implementation shall provide the architecture specific functions for Signal Handling specified in Table 11-7, with the full mandatory functionality as described in the referenced underlying specification. Table 11-7. libc - Signal Handling Function Interfaces __libc_current_sigrtmax(GLIBC_2.1) [LSB] __libc_current_sigrtmin(GLIBC_2.1) [LSB] __sigsetjmp(GLIBC_2.0) [LSB] __sysv_signal(GLIBC_2.0) [LSB] __xpg_sigpause(GLIBC_2.2) [LSB] bsd_signal(GLIBC_2.0) [SUSv3] psignal(GLIBC_2.0) [LSB] raise(GLIBC_2.0) [SUSv3] sigaction(GLIBC_2.0) [SUSv3] sigaddset(GLIBC_2.0) [SUSv3] sigaltstack(GLIBC_2.0) [SUSv3] sigandset(GLIBC_2.0) [LSB] sigdelset(GLIBC_2.0) [SUSv3] sigemptyset(GLIBC_2.0) [SUSv3] sigfillset(GLIBC_2.0) [SUSv3] sighold(GLIBC_2.1) [SUSv3] sigignore(GLIBC_2.1) [SUSv3] siginterrupt(GLIBC_2.0) [SUSv3] sigisemptyset(GLIBC_2.0) [LSB] sigismember(GLIBC_2.0) [SUSv3] siglongjmp(GLIBC_2.0) [SUSv3] signal(GLIBC_2.0) [SUSv3] sigorset(GLIBC_2.0) [LSB] sigpause(GLIBC_2.0) [LSB] sigpending(GLIBC_2.0) [SUSv3] sigprocmask(GLIBC_2.0) [SUSv3] sigqueue(GLIBC_2.1) [SUSv3] sigrelse(GLIBC_2.1) [SUSv3] sigreturn(GLIBC_2.0) [LSB] sigset(GLIBC_2.1) [SUSv3] sigsuspend(GLIBC_2.0) [SUSv3] sigtimedwait(GLIBC_2.1) [SUSv3] sigwait(GLIBC_2.0) [SUSv3] sigwaitinfo(GLIBC_2.1) [SUSv3] An LSB conforming implementation shall provide the architecture specific deprecated functions for Signal Handling specified in Table 11-8, with the full mandatory functionality as described in the referenced underlying specification. Note: These interfaces are deprecated, and applications should avoid using them. These interfaces may be withdrawn in future releases of this specification. Table 11-8. libc - Signal Handling Deprecated Function Interfaces sigpause(GLIBC_2.0) [LSB] An LSB conforming implementation shall provide the architecture specific data interfaces for Signal Handling specified in Table 11-9, with the full mandatory functionality as described in the referenced underlying specification. Table 11-9. libc - Signal Handling Data Interfaces _sys_siglist(GLIBC_2.3.3) [LSB] __________________________________________________________ 11.2.5. Localization Functions __________________________________________________________ 11.2.5.1. Interfaces for Localization Functions An LSB conforming implementation shall provide the architecture specific functions for Localization Functions specified in Table 11-10, with the full mandatory functionality as described in the referenced underlying specification. Table 11-10. libc - Localization Functions Function Interfaces bind_textdomain_codeset(GLIBC_2.2) [LSB] bindtextdomain(GLIBC_2.0) [LSB] catclose(GLIBC_2.0) [SUSv3] catgets(GLIBC_2.0) [SUSv3] catopen(GLIBC_2.0) [SUSv3] dcgettext(GLIBC_2.0) [LSB] dcngettext(GLIBC_2.2) [LSB] dgettext(GLIBC_2.0) [LSB] dngettext(GLIBC_2.2) [LSB] gettext(GLIBC_2.0) [LSB] iconv(GLIBC_2.1) [SUSv3] iconv_close(GLIBC_2.1) [SUSv3] iconv_open(GLIBC_2.1) [SUSv3] localeconv(GLIBC_2.2) [SUSv3] ngettext(GLIBC_2.2) [LSB] nl_langinfo(GLIBC_2.0) [SUSv3] setlocale(GLIBC_2.0) [SUSv3] textdomain(GLIBC_2.0) [LSB] An LSB conforming implementation shall provide the architecture specific data interfaces for Localization Functions specified in Table 11-11, with the full mandatory functionality as described in the referenced underlying specification. Table 11-11. libc - Localization Functions Data Interfaces _nl_msg_cat_cntr(GLIBC_2.0) [LSB] __________________________________________________________ 11.2.6. Posix Spawn Option __________________________________________________________ 11.2.6.1. Interfaces for Posix Spawn Option An LSB conforming implementation shall provide the architecture specific functions for Posix Spawn Option specified in Table 11-12, with the full mandatory functionality as described in the referenced underlying specification. Table 11-12. libc - Posix Spawn Option Function Interfaces posix_spawn(GLIBC_2.2) [SUSv3] posix_spawn_file_actions_addclose(GLIBC_2.2) [SUSv3] posix_spawn_file_actions_adddup2(GLIBC_2.2) [SUSv3] posix_spawn_file_actions_addopen(GLIBC_2.2) [SUSv3] posix_spawn_file_actions_destroy(GLIBC_2.2) [SUSv3] posix_spawn_file_actions_init(GLIBC_2.2) [SUSv3] posix_spawnattr_destroy(GLIBC_2.2) [SUSv3] posix_spawnattr_getflags(GLIBC_2.2) [SUSv3] posix_spawnattr_getpgroup(GLIBC_2.2) [SUSv3] posix_spawnattr_getschedparam(GLIBC_2.2) [SUSv3] posix_spawnattr_getschedpolicy(GLIBC_2.2) [SUSv3] posix_spawnattr_getsigdefault(GLIBC_2.2) [SUSv3] posix_spawnattr_getsigmask(GLIBC_2.2) [SUSv3] posix_spawnattr_init(GLIBC_2.2) [SUSv3] posix_spawnattr_setflags(GLIBC_2.2) [SUSv3] posix_spawnattr_setpgroup(GLIBC_2.2) [SUSv3] posix_spawnattr_setschedparam(GLIBC_2.2) [SUSv3] posix_spawnattr_setschedpolicy(GLIBC_2.2) [SUSv3] posix_spawnattr_setsigdefault(GLIBC_2.2) [SUSv3] posix_spawnattr_setsigmask(GLIBC_2.2) [SUSv3] posix_spawnp(GLIBC_2.2) [SUSv3] __________________________________________________________ 11.2.7. Posix Advisory Option __________________________________________________________ 11.2.7.1. Interfaces for Posix Advisory Option An LSB conforming implementation shall provide the architecture specific functions for Posix Advisory Option specified in Table 11-13, with the full mandatory functionality as described in the referenced underlying specification. Table 11-13. libc - Posix Advisory Option Function Interfaces posix_fadvise(GLIBC_2.2) [SUSv3] posix_fallocate(GLIBC_2.2) [SUSv3] posix_madvise(GLIBC_2.2) [SUSv3] posix_memalign(GLIBC_2.2) [SUSv3] __________________________________________________________ 11.2.8. Socket Interface __________________________________________________________ 11.2.8.1. Interfaces for Socket Interface An LSB conforming implementation shall provide the architecture specific functions for Socket Interface specified in Table 11-14, with the full mandatory functionality as described in the referenced underlying specification. Table 11-14. libc - Socket Interface Function Interfaces __h_errno_location(GLIBC_2.0) [LSB] accept(GLIBC_2.0) [SUSv3] bind(GLIBC_2.0) [SUSv3] bindresvport(GLIBC_2.0) [LSB] connect(GLIBC_2.0) [SUSv3] gethostid(GLIBC_2.0) [SUSv3] gethostname(GLIBC_2.0) [SUSv3] getpeername(GLIBC_2.0) [SUSv3] getsockname(GLIBC_2.0) [SUSv3] getsockopt(GLIBC_2.0) [LSB] if_freenameindex(GLIBC_2.1) [SUSv3] if_indextoname(GLIBC_2.1) [SUSv3] if_nameindex(GLIBC_2.1) [SUSv3] if_nametoindex(GLIBC_2.1) [SUSv3] listen(GLIBC_2.0) [SUSv3] recv(GLIBC_2.0) [SUSv3] recvfrom(GLIBC_2.0) [SUSv3] recvmsg(GLIBC_2.0) [SUSv3] send(GLIBC_2.0) [SUSv3] sendmsg(GLIBC_2.0) [SUSv3] sendto(GLIBC_2.0) [SUSv3] setsockopt(GLIBC_2.0) [LSB] shutdown(GLIBC_2.0) [SUSv3] sockatmark(GLIBC_2.2.4) [SUSv3] socket(GLIBC_2.0) [SUSv3] socketpair(GLIBC_2.0) [SUSv3] An LSB conforming implementation shall provide the architecture specific data interfaces for Socket Interface specified in Table 11-15, with the full mandatory functionality as described in the referenced underlying specification. Table 11-15. libc - Socket Interface Data Interfaces in6addr_any(GLIBC_2.1) [SUSv3] in6addr_loopback(GLIBC_2.1) [SUSv3] __________________________________________________________ 11.2.9. Wide Characters __________________________________________________________ 11.2.9.1. Interfaces for Wide Characters An LSB conforming implementation shall provide the architecture specific functions for Wide Characters specified in Table 11-16, with the full mandatory functionality as described in the referenced underlying specification. Table 11-16. libc - Wide Characters Function Interfaces __wcstod_internal(GLIBC_2.0) [LSB] __wcstof_internal(GLIBC_2.0) [LSB] __wcstol_internal(GLIBC_2.0) [LSB] __wcstold_internal(GLIBC_2.0) [LSB] __wcstoul_internal(GLIBC_2.0) [LSB] btowc(GLIBC_2.0) [SUSv3] fgetwc(GLIBC_2.2) [SUSv3] fgetws(GLIBC_2.2) [SUSv3] fputwc(GLIBC_2.2) [SUSv3] fputws(GLIBC_2.2) [SUSv3] fwide(GLIBC_2.2) [SUSv3] fwprintf(GLIBC_2.2) [SUSv3] fwscanf(GLIBC_2.2) [LSB] getwc(GLIBC_2.2) [SUSv3] getwchar(GLIBC_2.2) [SUSv3] mblen(GLIBC_2.0) [SUSv3] mbrlen(GLIBC_2.0) [SUSv3] mbrtowc(GLIBC_2.0) [SUSv3] mbsinit(GLIBC_2.0) [SUSv3] mbsnrtowcs(GLIBC_2.0) [LSB] mbsrtowcs(GLIBC_2.0) [SUSv3] mbstowcs(GLIBC_2.0) [SUSv3] mbtowc(GLIBC_2.0) [SUSv3] putwc(GLIBC_2.2) [SUSv3] putwchar(GLIBC_2.2) [SUSv3] swprintf(GLIBC_2.2) [SUSv3] swscanf(GLIBC_2.2) [LSB] towctrans(GLIBC_2.0) [SUSv3] towlower(GLIBC_2.0) [SUSv3] towupper(GLIBC_2.0) [SUSv3] ungetwc(GLIBC_2.2) [SUSv3] vfwprintf(GLIBC_2.2) [SUSv3] vfwscanf(GLIBC_2.2) [LSB] vswprintf(GLIBC_2.2) [SUSv3] vswscanf(GLIBC_2.2) [LSB] vwprintf(GLIBC_2.2) [SUSv3] vwscanf(GLIBC_2.2) [LSB] wcpcpy(GLIBC_2.0) [LSB] wcpncpy(GLIBC_2.0) [LSB] wcrtomb(GLIBC_2.0) [SUSv3] wcscasecmp(GLIBC_2.1) [LSB] wcscat(GLIBC_2.0) [SUSv3] wcschr(GLIBC_2.0) [SUSv3] wcscmp(GLIBC_2.0) [SUSv3] wcscoll(GLIBC_2.0) [SUSv3] wcscpy(GLIBC_2.0) [SUSv3] wcscspn(GLIBC_2.0) [SUSv3] wcsdup(GLIBC_2.0) [LSB] wcsftime(GLIBC_2.2) [SUSv3] wcslen(GLIBC_2.0) [SUSv3] wcsncasecmp(GLIBC_2.1) [LSB] wcsncat(GLIBC_2.0) [SUSv3] wcsncmp(GLIBC_2.0) [SUSv3] wcsncpy(GLIBC_2.0) [SUSv3] wcsnlen(GLIBC_2.1) [LSB] wcsnrtombs(GLIBC_2.0) [LSB] wcspbrk(GLIBC_2.0) [SUSv3] wcsrchr(GLIBC_2.0) [SUSv3] wcsrtombs(GLIBC_2.0) [SUSv3] wcsspn(GLIBC_2.0) [SUSv3] wcsstr(GLIBC_2.0) [SUSv3] wcstod(GLIBC_2.0) [SUSv3] wcstof(GLIBC_2.0) [SUSv3] wcstoimax(GLIBC_2.1) [SUSv3] wcstok(GLIBC_2.0) [SUSv3] wcstol(GLIBC_2.0) [SUSv3] wcstold(GLIBC_2.0) [SUSv3] wcstoll(GLIBC_2.1) [SUSv3] wcstombs(GLIBC_2.0) [SUSv3] wcstoq(GLIBC_2.0) [LSB] wcstoul(GLIBC_2.0) [SUSv3] wcstoull(GLIBC_2.1) [SUSv3] wcstoumax(GLIBC_2.1) [SUSv3] wcstouq(GLIBC_2.0) [LSB] wcswcs(GLIBC_2.1) [SUSv3] wcswidth(GLIBC_2.0) [SUSv3] wcsxfrm(GLIBC_2.0) [SUSv3] wctob(GLIBC_2.0) [SUSv3] wctomb(GLIBC_2.0) [SUSv3] wctrans(GLIBC_2.0) [SUSv3] wctype(GLIBC_2.0) [SUSv3] wcwidth(GLIBC_2.0) [SUSv3] wmemchr(GLIBC_2.0) [SUSv3] wmemcmp(GLIBC_2.0) [SUSv3] wmemcpy(GLIBC_2.0) [SUSv3] wmemmove(GLIBC_2.0) [SUSv3] wmemset(GLIBC_2.0) [SUSv3] wprintf(GLIBC_2.2) [SUSv3] wscanf(GLIBC_2.2) [LSB] __________________________________________________________ 11.2.10. String Functions __________________________________________________________ 11.2.10.1. Interfaces for String Functions An LSB conforming implementation shall provide the architecture specific functions for String Functions specified in Table 11-17, with the full mandatory functionality as described in the referenced underlying specification. Table 11-17. libc - String Functions Function Interfaces __mempcpy(GLIBC_2.0) [LSB] __rawmemchr(GLIBC_2.1) [LSB] __stpcpy(GLIBC_2.0) [LSB] __strdup(GLIBC_2.0) [LSB] __strtod_internal(GLIBC_2.0) [LSB] __strtof_internal(GLIBC_2.0) [LSB] __strtok_r(GLIBC_2.0) [LSB] __strtol_internal(GLIBC_2.0) [LSB] __strtold_internal(GLIBC_2.0) [LSB] __strtoll_internal(GLIBC_2.0) [LSB] __strtoul_internal(GLIBC_2.0) [LSB] __strtoull_internal(GLIBC_2.0) [LSB] __xpg_strerror_r(GLIBC_2.3.4) [LSB] bcmp(GLIBC_2.0) [SUSv3] bcopy(GLIBC_2.0) [SUSv3] bzero(GLIBC_2.0) [SUSv3] ffs(GLIBC_2.0) [SUSv3] index(GLIBC_2.0) [SUSv3] memccpy(GLIBC_2.0) [SUSv3] memchr(GLIBC_2.0) [SUSv3] memcmp(GLIBC_2.0) [SUSv3] memcpy(GLIBC_2.0) [SUSv3] memmove(GLIBC_2.0) [SUSv3] memrchr(GLIBC_2.2) [LSB] memset(GLIBC_2.0) [SUSv3] rindex(GLIBC_2.0) [SUSv3] stpcpy(GLIBC_2.0) [LSB] stpncpy(GLIBC_2.0) [LSB] strcasecmp(GLIBC_2.0) [SUSv3] strcasestr(GLIBC_2.1) [LSB] strcat(GLIBC_2.0) [SUSv3] strchr(GLIBC_2.0) [SUSv3] strcmp(GLIBC_2.0) [SUSv3] strcoll(GLIBC_2.0) [SUSv3] strcpy(GLIBC_2.0) [SUSv3] strcspn(GLIBC_2.0) [SUSv3] strdup(GLIBC_2.0) [SUSv3] strerror(GLIBC_2.0) [SUSv3] strerror_r(GLIBC_2.0) [LSB] strfmon(GLIBC_2.0) [SUSv3] strftime(GLIBC_2.0) [SUSv3] strlen(GLIBC_2.0) [SUSv3] strncasecmp(GLIBC_2.0) [SUSv3] strncat(GLIBC_2.0) [SUSv3] strncmp(GLIBC_2.0) [SUSv3] strncpy(GLIBC_2.0) [SUSv3] strndup(GLIBC_2.0) [LSB] strnlen(GLIBC_2.0) [LSB] strpbrk(GLIBC_2.0) [SUSv3] strptime(GLIBC_2.0) [LSB] strrchr(GLIBC_2.0) [SUSv3] strsep(GLIBC_2.0) [LSB] strsignal(GLIBC_2.0) [LSB] strspn(GLIBC_2.0) [SUSv3] strstr(GLIBC_2.0) [SUSv3] strtof(GLIBC_2.0) [SUSv3] strtoimax(GLIBC_2.1) [SUSv3] strtok(GLIBC_2.0) [SUSv3] strtok_r(GLIBC_2.0) [SUSv3] strtold(GLIBC_2.0) [SUSv3] strtoll(GLIBC_2.0) [SUSv3] strtoq(GLIBC_2.0) [LSB] strtoull(GLIBC_2.0) [SUSv3] strtoumax(GLIBC_2.1) [SUSv3] strtouq(GLIBC_2.0) [LSB] strxfrm(GLIBC_2.0) [SUSv3] swab(GLIBC_2.0) [SUSv3] An LSB conforming implementation shall provide the architecture specific deprecated functions for String Functions specified in Table 11-18, with the full mandatory functionality as described in the referenced underlying specification. Note: These interfaces are deprecated, and applications should avoid using them. These interfaces may be withdrawn in future releases of this specification. Table 11-18. libc - String Functions Deprecated Function Interfaces strerror_r(GLIBC_2.0) [LSB] __________________________________________________________ 11.2.11. IPC Functions __________________________________________________________ 11.2.11.1. Interfaces for IPC Functions An LSB conforming implementation shall provide the architecture specific functions for IPC Functions specified in Table 11-19, with the full mandatory functionality as described in the referenced underlying specification. Table 11-19. libc - IPC Functions Function Interfaces ftok(GLIBC_2.0) [SUSv3] msgctl(GLIBC_2.2) [SUSv3] msgget(GLIBC_2.0) [SUSv3] msgrcv(GLIBC_2.0) [SUSv3] msgsnd(GLIBC_2.0) [SUSv3] semctl(GLIBC_2.2) [SUSv3] semget(GLIBC_2.0) [SUSv3] semop(GLIBC_2.0) [SUSv3] shmat(GLIBC_2.0) [SUSv3] shmctl(GLIBC_2.2) [SUSv3] shmdt(GLIBC_2.0) [SUSv3] shmget(GLIBC_2.0) [SUSv3] __________________________________________________________ 11.2.12. Regular Expressions __________________________________________________________ 11.2.12.1. Interfaces for Regular Expressions An LSB conforming implementation shall provide the architecture specific functions for Regular Expressions specified in Table 11-20, with the full mandatory functionality as described in the referenced underlying specification. Table 11-20. libc - Regular Expressions Function Interfaces regcomp(GLIBC_2.0) [SUSv3] regerror(GLIBC_2.0) [SUSv3] regexec(GLIBC_2.3.4) [LSB] regfree(GLIBC_2.0) [SUSv3] __________________________________________________________ 11.2.13. Character Type Functions __________________________________________________________ 11.2.13.1. Interfaces for Character Type Functions An LSB conforming implementation shall provide the architecture specific functions for Character Type Functions specified in Table 11-21, with the full mandatory functionality as described in the referenced underlying specification. Table 11-21. libc - Character Type Functions Function Interfaces __ctype_get_mb_cur_max(GLIBC_2.0) [LSB] _tolower(GLIBC_2.0) [SUSv3] _toupper(GLIBC_2.0) [SUSv3] isalnum(GLIBC_2.0) [SUSv3] isalpha(GLIBC_2.0) [SUSv3] isascii(GLIBC_2.0) [SUSv3] iscntrl(GLIBC_2.0) [SUSv3] isdigit(GLIBC_2.0) [SUSv3] isgraph(GLIBC_2.0) [SUSv3] islower(GLIBC_2.0) [SUSv3] isprint(GLIBC_2.0) [SUSv3] ispunct(GLIBC_2.0) [SUSv3] isspace(GLIBC_2.0) [SUSv3] isupper(GLIBC_2.0) [SUSv3] iswalnum(GLIBC_2.0) [SUSv3] iswalpha(GLIBC_2.0) [SUSv3] iswblank(GLIBC_2.1) [SUSv3] iswcntrl(GLIBC_2.0) [SUSv3] iswctype(GLIBC_2.0) [SUSv3] iswdigit(GLIBC_2.0) [SUSv3] iswgraph(GLIBC_2.0) [SUSv3] iswlower(GLIBC_2.0) [SUSv3] iswprint(GLIBC_2.0) [SUSv3] iswpunct(GLIBC_2.0) [SUSv3] iswspace(GLIBC_2.0) [SUSv3] iswupper(GLIBC_2.0) [SUSv3] iswxdigit(GLIBC_2.0) [SUSv3] isxdigit(GLIBC_2.0) [SUSv3] toascii(GLIBC_2.0) [SUSv3] tolower(GLIBC_2.0) [SUSv3] toupper(GLIBC_2.0) [SUSv3] __________________________________________________________ 11.2.14. Time Manipulation __________________________________________________________ 11.2.14.1. Interfaces for Time Manipulation An LSB conforming implementation shall provide the architecture specific functions for Time Manipulation specified in Table 11-22, with the full mandatory functionality as described in the referenced underlying specification. Table 11-22. libc - Time Manipulation Function Interfaces adjtime(GLIBC_2.0) [LSB] asctime(GLIBC_2.0) [SUSv3] asctime_r(GLIBC_2.0) [SUSv3] ctime(GLIBC_2.0) [SUSv3] ctime_r(GLIBC_2.0) [SUSv3] difftime(GLIBC_2.0) [SUSv3] gmtime(GLIBC_2.0) [SUSv3] gmtime_r(GLIBC_2.0) [SUSv3] localtime(GLIBC_2.0) [SUSv3] localtime_r(GLIBC_2.0) [SUSv3] mktime(GLIBC_2.0) [SUSv3] tzset(GLIBC_2.0) [SUSv3] ualarm(GLIBC_2.0) [SUSv3] An LSB conforming implementation shall provide the architecture specific data interfaces for Time Manipulation specified in Table 11-23, with the full mandatory functionality as described in the referenced underlying specification. Table 11-23. libc - Time Manipulation Data Interfaces __daylight(GLIBC_2.0) [LSB] __timezone(GLIBC_2.0) [LSB] __tzname(GLIBC_2.0) [LSB] daylight(GLIBC_2.0) [SUSv3] timezone(GLIBC_2.0) [SUSv3] tzname(GLIBC_2.0) [SUSv3] __________________________________________________________ 11.2.15. Terminal Interface Functions __________________________________________________________ 11.2.15.1. Interfaces for Terminal Interface Functions An LSB conforming implementation shall provide the architecture specific functions for Terminal Interface Functions specified in Table 11-24, with the full mandatory functionality as described in the referenced underlying specification. Table 11-24. libc - Terminal Interface Functions Function Interfaces cfgetispeed(GLIBC_2.0) [SUSv3] cfgetospeed(GLIBC_2.0) [SUSv3] cfmakeraw(GLIBC_2.0) [LSB] cfsetispeed(GLIBC_2.0) [SUSv3] cfsetospeed(GLIBC_2.0) [SUSv3] cfsetspeed(GLIBC_2.0) [LSB] tcdrain(GLIBC_2.0) [SUSv3] tcflow(GLIBC_2.0) [SUSv3] tcflush(GLIBC_2.0) [SUSv3] tcgetattr(GLIBC_2.0) [SUSv3] tcgetpgrp(GLIBC_2.0) [SUSv3] tcgetsid(GLIBC_2.1) [SUSv3] tcsendbreak(GLIBC_2.0) [SUSv3] tcsetattr(GLIBC_2.0) [SUSv3] tcsetpgrp(GLIBC_2.0) [SUSv3] __________________________________________________________ 11.2.16. System Database Interface __________________________________________________________ 11.2.16.1. Interfaces for System Database Interface An LSB conforming implementation shall provide the architecture specific functions for System Database Interface specified in Table 11-25, with the full mandatory functionality as described in the referenced underlying specification. Table 11-25. libc - System Database Interface Function Interfaces endgrent(GLIBC_2.0) [SUSv3] endprotoent(GLIBC_2.0) [SUSv3] endpwent(GLIBC_2.0) [SUSv3] endservent(GLIBC_2.0) [SUSv3] endutent(GLIBC_2.0) [LSB] endutxent(GLIBC_2.1) [SUSv3] getgrent(GLIBC_2.0) [SUSv3] getgrgid(GLIBC_2.0) [SUSv3] getgrgid_r(GLIBC_2.1.2) [SUSv3] getgrnam(GLIBC_2.0) [SUSv3] getgrnam_r(GLIBC_2.1.2) [SUSv3] getgrouplist(GLIBC_2.2.4) [LSB] gethostbyaddr(GLIBC_2.0) [SUSv3] gethostbyaddr_r(GLIBC_2.1.2) [LSB] gethostbyname(GLIBC_2.0) [SUSv3] gethostbyname2(GLIBC_2.0) [LSB] gethostbyname2_r(GLIBC_2.1.2) [LSB] gethostbyname_r(GLIBC_2.1.2) [LSB] getprotobyname(GLIBC_2.0) [SUSv3] getprotobynumber(GLIBC_2.0) [SUSv3] getprotoent(GLIBC_2.0) [SUSv3] getpwent(GLIBC_2.0) [SUSv3] getpwnam(GLIBC_2.0) [SUSv3] getpwnam_r(GLIBC_2.1.2) [SUSv3] getpwuid(GLIBC_2.0) [SUSv3] getpwuid_r(GLIBC_2.1.2) [SUSv3] getservbyname(GLIBC_2.0) [SUSv3] getservbyport(GLIBC_2.0) [SUSv3] getservent(GLIBC_2.0) [SUSv3] getutent(GLIBC_2.0) [LSB] getutent_r(GLIBC_2.0) [LSB] getutxent(GLIBC_2.1) [SUSv3] getutxid(GLIBC_2.1) [SUSv3] getutxline(GLIBC_2.1) [SUSv3] pututxline(GLIBC_2.1) [SUSv3] setgrent(GLIBC_2.0) [SUSv3] setgroups(GLIBC_2.0) [LSB] setprotoent(GLIBC_2.0) [SUSv3] setpwent(GLIBC_2.0) [SUSv3] setservent(GLIBC_2.0) [SUSv3] setutent(GLIBC_2.0) [LSB] setutxent(GLIBC_2.1) [SUSv3] utmpname(GLIBC_2.0) [LSB] An LSB conforming implementation shall provide the architecture specific deprecated functions for System Database Interface specified in Table 11-26, with the full mandatory functionality as described in the referenced underlying specification. Note: These interfaces are deprecated, and applications should avoid using them. These interfaces may be withdrawn in future releases of this specification. Table 11-26. libc - System Database Interface Deprecated Function Interfaces gethostbyaddr(GLIBC_2.0) [SUSv3] gethostbyaddr_r(GLIBC_2.1.2) [LSB] gethostbyname(GLIBC_2.0) [SUSv3] gethostbyname2(GLIBC_2.0) [LSB] gethostbyname2_r(GLIBC_2.1.2) [LSB] gethostbyname_r(GLIBC_2.1.2) [LSB] __________________________________________________________ 11.2.17. Language Support __________________________________________________________ 11.2.17.1. Interfaces for Language Support An LSB conforming implementation shall provide the architecture specific functions for Language Support specified in Table 11-27, with the full mandatory functionality as described in the referenced underlying specification. Table 11-27. libc - Language Support Function Interfaces __libc_start_main(GLIBC_2.0) [LSB] __________________________________________________________ 11.2.18. Large File Support __________________________________________________________ 11.2.18.1. Interfaces for Large File Support An LSB conforming implementation shall provide the architecture specific functions for Large File Support specified in Table 11-28, with the full mandatory functionality as described in the referenced underlying specification. Table 11-28. libc - Large File Support Function Interfaces __fxstat64(GLIBC_2.2) [LSB] __lxstat64(GLIBC_2.2) [LSB] __xstat64(GLIBC_2.2) [LSB] creat64(GLIBC_2.1) [LFS] fgetpos64(GLIBC_2.2) [LFS] fopen64(GLIBC_2.1) [LFS] freopen64(GLIBC_2.1) [LFS] fseeko64(GLIBC_2.1) [LFS] fsetpos64(GLIBC_2.2) [LFS] fstatfs64(GLIBC_2.1) [LSB] fstatvfs64(GLIBC_2.1) [LFS] ftello64(GLIBC_2.1) [LFS] ftruncate64(GLIBC_2.1) [LFS] ftw64(GLIBC_2.1) [LFS] getrlimit64(GLIBC_2.2) [LFS] lockf64(GLIBC_2.1) [LFS] mkstemp64(GLIBC_2.2) [LFS] mmap64(GLIBC_2.1) [LFS] nftw64(GLIBC_2.3.3) [LFS] posix_fadvise64(GLIBC_2.3.3) [LSB] posix_fallocate64(GLIBC_2.3.3) [LSB] readdir64(GLIBC_2.2) [LFS] readdir64_r(GLIBC_2.2) [LSB] statfs64(GLIBC_2.1) [LSB] statvfs64(GLIBC_2.1) [LFS] tmpfile64(GLIBC_2.1) [LFS] truncate64(GLIBC_2.1) [LFS] An LSB conforming implementation shall provide the architecture specific deprecated functions for Large File Support specified in Table 11-29, with the full mandatory functionality as described in the referenced underlying specification. Note: These interfaces are deprecated, and applications should avoid using them. These interfaces may be withdrawn in future releases of this specification. Table 11-29. libc - Large File Support Deprecated Function Interfaces fstatfs64(GLIBC_2.1) [LSB] statfs64(GLIBC_2.1) [LSB] __________________________________________________________ 11.2.19. Standard Library __________________________________________________________ 11.2.19.1. Interfaces for Standard Library An LSB conforming implementation shall provide the architecture specific functions for Standard Library specified in Table 11-30, with the full mandatory functionality as described in the referenced underlying specification. Table 11-30. libc - Standard Library Function Interfaces _Exit(GLIBC_2.1.1) [SUSv3] __assert_fail(GLIBC_2.0) [LSB] __cxa_atexit(GLIBC_2.1.3) [LSB] __cxa_finalize(GLIBC_2.1.3) [LSB] __errno_location(GLIBC_2.0) [LSB] __fpending(GLIBC_2.2) [LSB] __getpagesize(GLIBC_2.0) [LSB] __isinf(GLIBC_2.0) [LSB] __isinff(GLIBC_2.0) [LSB] __isinfl(GLIBC_2.0) [LSB] __isnan(GLIBC_2.0) [LSB] __isnanf(GLIBC_2.0) [LSB] __isnanl(GLIBC_2.0) [LSB] __sysconf(GLIBC_2.2) [LSB] __xpg_basename(GLIBC_2.0) [LSB] _exit(GLIBC_2.0) [SUSv3] _longjmp(GLIBC_2.0) [SUSv3] _setjmp(GLIBC_2.0) [SUSv3] a64l(GLIBC_2.0) [SUSv3] abort(GLIBC_2.0) [SUSv3] abs(GLIBC_2.0) [SUSv3] atof(GLIBC_2.0) [SUSv3] atoi(GLIBC_2.0) [SUSv3] atol(GLIBC_2.0) [SUSv3] atoll(GLIBC_2.0) [SUSv3] basename(GLIBC_2.0) [LSB] bsearch(GLIBC_2.0) [SUSv3] calloc(GLIBC_2.0) [SUSv3] closelog(GLIBC_2.0) [SUSv3] confstr(GLIBC_2.0) [SUSv3] cuserid(GLIBC_2.0) [SUSv2] daemon(GLIBC_2.0) [LSB] dirname(GLIBC_2.0) [SUSv3] div(GLIBC_2.0) [SUSv3] drand48(GLIBC_2.0) [SUSv3] ecvt(GLIBC_2.0) [SUSv3] erand48(GLIBC_2.0) [SUSv3] err(GLIBC_2.0) [LSB] error(GLIBC_2.0) [LSB] errx(GLIBC_2.0) [LSB] fcvt(GLIBC_2.0) [SUSv3] fmtmsg(GLIBC_2.1) [SUSv3] fnmatch(GLIBC_2.2.3) [SUSv3] fpathconf(GLIBC_2.0) [SUSv3] free(GLIBC_2.0) [SUSv3] freeaddrinfo(GLIBC_2.0) [SUSv3] ftrylockfile(GLIBC_2.0) [SUSv3] ftw(GLIBC_2.0) [SUSv3] funlockfile(GLIBC_2.0) [SUSv3] gai_strerror(GLIBC_2.1) [SUSv3] gcvt(GLIBC_2.0) [SUSv3] getaddrinfo(GLIBC_2.0) [SUSv3] getcwd(GLIBC_2.0) [SUSv3] getdate(GLIBC_2.1) [SUSv3] getdomainname(GLIBC_2.0) [LSB] getenv(GLIBC_2.0) [SUSv3] getlogin(GLIBC_2.0) [SUSv3] getlogin_r(GLIBC_2.0) [SUSv3] getnameinfo(GLIBC_2.1) [SUSv3] getopt(GLIBC_2.0) [LSB] getopt_long(GLIBC_2.0) [LSB] getopt_long_only(GLIBC_2.0) [LSB] getsubopt(GLIBC_2.0) [SUSv3] gettimeofday(GLIBC_2.0) [SUSv3] glob(GLIBC_2.0) [SUSv3] glob64(GLIBC_2.2) [LSB] globfree(GLIBC_2.0) [SUSv3] globfree64(GLIBC_2.1) [LSB] grantpt(GLIBC_2.1) [SUSv3] hcreate(GLIBC_2.0) [SUSv3] hdestroy(GLIBC_2.0) [SUSv3] hsearch(GLIBC_2.0) [SUSv3] htonl(GLIBC_2.0) [SUSv3] htons(GLIBC_2.0) [SUSv3] imaxabs(GLIBC_2.1.1) [SUSv3] imaxdiv(GLIBC_2.1.1) [SUSv3] inet_addr(GLIBC_2.0) [SUSv3] inet_aton(GLIBC_2.0) [LSB] inet_ntoa(GLIBC_2.0) [SUSv3] inet_ntop(GLIBC_2.0) [SUSv3] inet_pton(GLIBC_2.0) [SUSv3] initstate(GLIBC_2.0) [SUSv3] insque(GLIBC_2.0) [SUSv3] isatty(GLIBC_2.0) [SUSv3] isblank(GLIBC_2.0) [SUSv3] jrand48(GLIBC_2.0) [SUSv3] l64a(GLIBC_2.0) [SUSv3] labs(GLIBC_2.0) [SUSv3] lcong48(GLIBC_2.0) [SUSv3] ldiv(GLIBC_2.0) [SUSv3] lfind(GLIBC_2.0) [SUSv3] llabs(GLIBC_2.0) [SUSv3] lldiv(GLIBC_2.0) [SUSv3] longjmp(GLIBC_2.0) [SUSv3] lrand48(GLIBC_2.0) [SUSv3] lsearch(GLIBC_2.0) [SUSv3] makecontext(GLIBC_2.1) [SUSv3] malloc(GLIBC_2.0) [SUSv3] memmem(GLIBC_2.0) [LSB] mkstemp(GLIBC_2.0) [SUSv3] mktemp(GLIBC_2.0) [SUSv3] mrand48(GLIBC_2.0) [SUSv3] nftw(GLIBC_2.3.3) [SUSv3] nrand48(GLIBC_2.0) [SUSv3] ntohl(GLIBC_2.0) [SUSv3] ntohs(GLIBC_2.0) [SUSv3] openlog(GLIBC_2.0) [SUSv3] perror(GLIBC_2.0) [SUSv3] posix_openpt(GLIBC_2.2.1) [SUSv3] ptsname(GLIBC_2.1) [SUSv3] putenv(GLIBC_2.0) [SUSv3] qsort(GLIBC_2.0) [SUSv3] rand(GLIBC_2.0) [SUSv3] rand_r(GLIBC_2.0) [SUSv3] random(GLIBC_2.0) [SUSv3] realloc(GLIBC_2.0) [SUSv3] realpath(GLIBC_2.3) [SUSv3] remque(GLIBC_2.0) [SUSv3] seed48(GLIBC_2.0) [SUSv3] setenv(GLIBC_2.0) [SUSv3] sethostname(GLIBC_2.0) [LSB] setlogmask(GLIBC_2.0) [SUSv3] setstate(GLIBC_2.0) [SUSv3] srand(GLIBC_2.0) [SUSv3] srand48(GLIBC_2.0) [SUSv3] srandom(GLIBC_2.0) [SUSv3] strtod(GLIBC_2.0) [SUSv3] strtol(GLIBC_2.0) [SUSv3] strtoul(GLIBC_2.0) [SUSv3] swapcontext(GLIBC_2.1) [SUSv3] syslog(GLIBC_2.0) [SUSv3] system(GLIBC_2.0) [LSB] tdelete(GLIBC_2.0) [SUSv3] tfind(GLIBC_2.0) [SUSv3] tmpfile(GLIBC_2.1) [SUSv3] tmpnam(GLIBC_2.0) [SUSv3] tsearch(GLIBC_2.0) [SUSv3] ttyname(GLIBC_2.0) [SUSv3] ttyname_r(GLIBC_2.0) [SUSv3] twalk(GLIBC_2.0) [SUSv3] unlockpt(GLIBC_2.1) [SUSv3] unsetenv(GLIBC_2.0) [SUSv3] usleep(GLIBC_2.0) [SUSv3] verrx(GLIBC_2.0) [LSB] vfscanf(GLIBC_2.0) [LSB] vscanf(GLIBC_2.0) [LSB] vsscanf(GLIBC_2.0) [LSB] vsyslog(GLIBC_2.0) [LSB] warn(GLIBC_2.0) [LSB] warnx(GLIBC_2.0) [LSB] wordexp(GLIBC_2.1) [SUSv3] wordfree(GLIBC_2.1) [SUSv3] An LSB conforming implementation shall provide the architecture specific deprecated functions for Standard Library specified in Table 11-31, with the full mandatory functionality as described in the referenced underlying specification. Note: These interfaces are deprecated, and applications should avoid using them. These interfaces may be withdrawn in future releases of this specification. Table 11-31. libc - Standard Library Deprecated Function Interfaces basename(GLIBC_2.0) [LSB] getdomainname(GLIBC_2.0) [LSB] inet_aton(GLIBC_2.0) [LSB] An LSB conforming implementation shall provide the architecture specific data interfaces for Standard Library specified in Table 11-32, with the full mandatory functionality as described in the referenced underlying specification. Table 11-32. libc - Standard Library Data Interfaces __environ(GLIBC_2.0) [LSB] _environ(GLIBC_2.0) [LSB] _sys_errlist(GLIBC_2.3) [LSB] environ(GLIBC_2.0) [SUSv3] getdate_err(GLIBC_2.1) [SUSv3] optarg(GLIBC_2.0) [SUSv3] opterr(GLIBC_2.0) [SUSv3] optind(GLIBC_2.0) [SUSv3] optopt(GLIBC_2.0) [SUSv3] __________________________________________________________ 11.3. Data Definitions for libc This section defines global identifiers and their values that are associated with interfaces contained in libc. These definitions are organized into groups that correspond to system headers. This convention is used as a convenience for the reader, and does not imply the existence of these headers, or their content. Where an interface is defined as requiring a particular system header file all of the data definitions for that system header file presented here shall be in effect. This section gives data definitions to promote binary application portability, not to repeat source interface definitions available elsewhere. System providers and application developers should use this ABI to supplement - not to replace - source interface definition specifications. This specification uses the ISO C (1999) C Language as the reference programming language, and data definitions are specified in ISO C format. The C language is used here as a convenient notation. Using a C language description of these data objects does not preclude their use by other programming languages. __________________________________________________________ 11.3.1. ctype.h enum { _ISupper = 256, _ISlower = 512, _ISalpha = 1024, _ISdigit = 2048, _ISxdigit = 4096, _ISspace = 8192, _ISprint = 16384, _ISgraph = 32768, _ISblank = 1, _IScntrl = 2, _ISpunct = 4, _ISalnum = 8 }; __________________________________________________________ 11.3.2. dirent.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.3. errno.h #define EDEADLOCK EDEADLK __________________________________________________________ 11.3.4. fcntl.h #define O_LARGEFILE 0100000 #define F_GETLK64 12 #define F_SETLK64 13 #define F_SETLKW64 14 __________________________________________________________ 11.3.5. fnmatch.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.6. ftw.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.7. getopt.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.8. glob.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.9. iconv.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.10. langinfo.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.11. limits.h #define LONG_MAX 0x7FFFFFFFL #define ULONG_MAX 0xFFFFFFFFUL #define CHAR_MAX SCHAR_MAX #define CHAR_MIN SCHAR_MIN #define PTHREAD_STACK_MIN 16384 __________________________________________________________ 11.3.12. locale.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.13. net/if.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.14. netdb.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.15. netinet/in.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.16. netinet/ip.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.17. netinet/tcp.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.18. netinet/udp.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.19. nl_types.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.20. pwd.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.21. regex.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.22. rpc/auth.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.23. rpc/clnt.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.24. rpc/rpc_msg.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.25. rpc/svc.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.26. rpc/types.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.27. rpc/xdr.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.28. sched.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.29. search.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.30. setjmp.h typedef int __jmp_buf[6]; __________________________________________________________ 11.3.31. signal.h #define SIGEV_PAD_SIZE ((SIGEV_MAX_SIZE/sizeof(int))-3) #define SI_PAD_SIZE ((SI_MAX_SIZE/sizeof(int))-3) struct sigaction { union { sighandler_t _sa_handler; void (*_sa_sigaction) (int, siginfo_t *, void *); } __sigaction_handler; sigset_t sa_mask; unsigned long int sa_flags; void (*sa_restorer) (void); }; #define MINSIGSTKSZ 2048 #define SIGSTKSZ 8192 struct _fpreg { unsigned short significand[4]; unsigned short exponent; }; struct _fpxreg { unsigned short significand[4]; unsigned short exponent; unsigned short padding[3]; }; struct _xmmreg { unsigned long int element[4]; }; struct _fpstate { unsigned long int cw; unsigned long int sw; unsigned long int tag; unsigned long int ipoff; unsigned long int cssel; unsigned long int dataoff; unsigned long int datasel; struct _fpreg _st[8]; unsigned short status; unsigned short magic; unsigned long int _fxsr_env[6]; unsigned long int mxcsr; unsigned long int reserved; struct _fpxreg _fxsr_st[8]; struct _xmmreg _xmm[8]; unsigned long int padding[56]; }; struct sigcontext { unsigned short gs; unsigned short __gsh; unsigned short fs; unsigned short __fsh; unsigned short es; unsigned short __esh; unsigned short ds; unsigned short __dsh; unsigned long int edi; unsigned long int esi; unsigned long int ebp; unsigned long int esp; unsigned long int ebx; unsigned long int edx; unsigned long int ecx; unsigned long int eax; unsigned long int trapno; unsigned long int err; unsigned long int eip; unsigned short cs; unsigned short __csh; unsigned long int eflags; unsigned long int esp_at_signal; unsigned short ss; unsigned short __ssh; struct _fpstate *fpstate; unsigned long int oldmask; unsigned long int cr2; }; __________________________________________________________ 11.3.32. spawn.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.33. stddef.h typedef long int wchar_t; typedef unsigned int size_t; typedef int ptrdiff_t; __________________________________________________________ 11.3.34. stdint.h #define INT64_C(c) c ## LL #define INTMAX_C(c) c ## LL #define __INT64_C(c) c ## LL #define UINT64_C(c) c ## ULL #define UINTMAX_C(c) c ## ULL #define __UINT64_C(c) c ## ULL #define INTPTR_MIN (-2147483647-1) #define INT_FAST16_MIN (-2147483647-1) #define INT_FAST32_MIN (-2147483647-1) #define PTRDIFF_MIN (-2147483647-1) #define INTPTR_MAX (2147483647) #define INT_FAST16_MAX (2147483647) #define INT_FAST32_MAX (2147483647) #define PTRDIFF_MAX (2147483647) #define SIZE_MAX (4294967295U) #define UINTPTR_MAX (4294967295U) #define UINT_FAST16_MAX (4294967295U) #define UINT_FAST32_MAX (4294967295U) typedef long long int int64_t; typedef long long int intmax_t; typedef unsigned long long int uintmax_t; typedef int intptr_t; typedef unsigned int uintptr_t; typedef unsigned long long int uint64_t; typedef long long int int_least64_t; typedef unsigned long long int uint_least64_t; typedef int int_fast16_t; typedef int int_fast32_t; typedef long long int int_fast64_t; typedef unsigned int uint_fast16_t; typedef unsigned int uint_fast32_t; typedef unsigned long long int uint_fast64_t; __________________________________________________________ 11.3.35. stdio.h #define __IO_FILE_SIZE 148 __________________________________________________________ 11.3.36. stdlib.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.37. sys/file.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.38. sys/ioctl.h #define TIOCGWINSZ 0x5413 #define FIONREAD 0x541B #define TIOCNOTTY 0x5422 __________________________________________________________ 11.3.39. sys/ipc.h struct ipc_perm { key_t __key; uid_t uid; gid_t gid; uid_t cuid; gid_t cgid; unsigned short mode; unsigned short __pad1; unsigned short __seq; unsigned short __pad2; unsigned long int __unused1; unsigned long int __unused2; }; __________________________________________________________ 11.3.40. sys/mman.h #define MCL_CURRENT 1 #define MCL_FUTURE 2 __________________________________________________________ 11.3.41. sys/msg.h typedef unsigned long int msgqnum_t; typedef unsigned long int msglen_t; struct msqid_ds { struct ipc_perm msg_perm; time_t msg_stime; unsigned long int __unused1; time_t msg_rtime; unsigned long int __unused2; time_t msg_ctime; unsigned long int __unused3; unsigned long int __msg_cbytes; msgqnum_t msg_qnum; msglen_t msg_qbytes; pid_t msg_lspid; pid_t msg_lrpid; unsigned long int __unused4; unsigned long int __unused5; }; __________________________________________________________ 11.3.42. sys/param.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.43. sys/poll.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.44. sys/resource.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.45. sys/sem.h struct semid_ds { struct ipc_perm sem_perm; time_t sem_otime; unsigned long int __unused1; time_t sem_ctime; unsigned long int __unused2; unsigned long int sem_nsems; unsigned long int __unused3; unsigned long int __unused4; }; __________________________________________________________ 11.3.46. sys/shm.h #define SHMLBA (__getpagesize()) typedef unsigned long int shmatt_t; struct shmid_ds { struct ipc_perm shm_perm; int shm_segsz; time_t shm_atime; unsigned long int __unused1; time_t shm_dtime; unsigned long int __unused2; time_t shm_ctime; unsigned long int __unused3; pid_t shm_cpid; pid_t shm_lpid; shmatt_t shm_nattch; unsigned long int __unused4; unsigned long int __unused5; }; __________________________________________________________ 11.3.47. sys/socket.h typedef uint32_t __ss_aligntype; #define SO_RCVLOWAT 18 #define SO_SNDLOWAT 19 #define SO_RCVTIMEO 20 #define SO_SNDTIMEO 21 __________________________________________________________ 11.3.48. sys/stat.h #define _STAT_VER 3 struct stat { dev_t st_dev; unsigned short __pad1; unsigned long int st_ino; mode_t st_mode; nlink_t st_nlink; uid_t st_uid; gid_t st_gid; dev_t st_rdev; unsigned short __pad2; off_t st_size; blksize_t st_blksize; blkcnt_t st_blocks; struct timespec st_atim; struct timespec st_mtim; struct timespec st_ctim; unsigned long int __unused4; unsigned long int __unused5; }; struct stat64 { dev_t st_dev; unsigned int __pad1; ino_t __st_ino; mode_t st_mode; nlink_t st_nlink; uid_t st_uid; gid_t st_gid; dev_t st_rdev; unsigned int __pad2; off64_t st_size; blksize_t st_blksize; blkcnt64_t st_blocks; struct timespec st_atim; struct timespec st_mtim; struct timespec st_ctim; ino64_t st_ino; }; __________________________________________________________ 11.3.49. sys/statfs.h struct statfs { int f_type; int f_bsize; fsblkcnt_t f_blocks; fsblkcnt_t f_bfree; fsblkcnt_t f_bavail; fsfilcnt_t f_files; fsfilcnt_t f_ffree; fsid_t f_fsid; int f_namelen; int f_frsize; int f_spare[5]; }; struct statfs64 { int f_type; int f_bsize; fsblkcnt64_t f_blocks; fsblkcnt64_t f_bfree; fsblkcnt64_t f_bavail; fsfilcnt64_t f_files; fsfilcnt64_t f_ffree; fsid_t f_fsid; int f_namelen; int f_frsize; int f_spare[5]; }; __________________________________________________________ 11.3.50. sys/statvfs.h struct statvfs { unsigned long int f_bsize; unsigned long int f_frsize; fsblkcnt_t f_blocks; fsblkcnt_t f_bfree; fsblkcnt_t f_bavail; fsfilcnt_t f_files; fsfilcnt_t f_ffree; fsfilcnt_t f_favail; unsigned long int f_fsid; int __f_unused; unsigned long int f_flag; unsigned long int f_namemax; int __f_spare[6]; }; struct statvfs64 { unsigned long int f_bsize; unsigned long int f_frsize; fsblkcnt64_t f_blocks; fsblkcnt64_t f_bfree; fsblkcnt64_t f_bavail; fsfilcnt64_t f_files; fsfilcnt64_t f_ffree; fsfilcnt64_t f_favail; unsigned long int f_fsid; int __f_unused; unsigned long int f_flag; unsigned long int f_namemax; int __f_spare[6]; }; __________________________________________________________ 11.3.51. sys/time.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.52. sys/timeb.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.53. sys/times.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.54. sys/types.h typedef int32_t ssize_t; #define __FDSET_LONGS 32 __________________________________________________________ 11.3.55. sys/un.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.56. sys/utsname.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.57. sys/wait.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.58. syslog.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.59. termios.h #define OLCUC 0000002 #define ONLCR 0000004 #define XCASE 0000004 #define NLDLY 0000400 #define CR1 0001000 #define IUCLC 0001000 #define CR2 0002000 #define CR3 0003000 #define CRDLY 0003000 #define TAB1 0004000 #define TAB2 0010000 #define TAB3 0014000 #define TABDLY 0014000 #define BS1 0020000 #define BSDLY 0020000 #define VT1 0040000 #define VTDLY 0040000 #define FF1 0100000 #define FFDLY 0100000 #define VSUSP 10 #define VEOL 11 #define VREPRINT 12 #define VDISCARD 13 #define VWERASE 14 #define VEOL2 16 #define VMIN 6 #define VSWTC 7 #define VSTART 8 #define VSTOP 9 #define IXON 0002000 #define IXOFF 0010000 #define CS6 0000020 #define CS7 0000040 #define CS8 0000060 #define CSIZE 0000060 #define CSTOPB 0000100 #define CREAD 0000200 #define PARENB 0000400 #define PARODD 0001000 #define HUPCL 0002000 #define CLOCAL 0004000 #define VTIME 5 #define ISIG 0000001 #define ICANON 0000002 #define ECHOE 0000020 #define ECHOK 0000040 #define ECHONL 0000100 #define NOFLSH 0000200 #define TOSTOP 0000400 #define ECHOCTL 0001000 #define ECHOPRT 0002000 #define ECHOKE 0004000 #define FLUSHO 0010000 #define PENDIN 0040000 #define IEXTEN 0100000 __________________________________________________________ 11.3.60. ucontext.h typedef int greg_t; #define NGREG 19 typedef greg_t gregset_t[19]; struct _libc_fpreg { unsigned short significand[4]; unsigned short exponent; }; struct _libc_fpstate { unsigned long int cw; unsigned long int sw; unsigned long int tag; unsigned long int ipoff; unsigned long int cssel; unsigned long int dataoff; unsigned long int datasel; struct _libc_fpreg _st[8]; unsigned long int status; }; typedef struct _libc_fpstate *fpregset_t; typedef struct { gregset_t gregs; fpregset_t fpregs; unsigned long int oldmask; unsigned long int cr2; } mcontext_t; typedef struct ucontext { unsigned long int uc_flags; struct ucontext *uc_link; stack_t uc_stack; mcontext_t uc_mcontext; sigset_t uc_sigmask; struct _libc_fpstate __fpregs_mem; } ucontext_t; __________________________________________________________ 11.3.61. ulimit.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.62. unistd.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.63. utime.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.64. utmp.h struct lastlog { time_t ll_time; char ll_line[UT_LINESIZE]; char ll_host[UT_HOSTSIZE]; }; struct utmp { short ut_type; pid_t ut_pid; char ut_line[UT_LINESIZE]; char ut_id[4]; char ut_user[UT_NAMESIZE]; char ut_host[UT_HOSTSIZE]; struct exit_status ut_exit; long int ut_session; struct timeval ut_tv; int32_t ut_addr_v6[4]; char __unused[20]; }; __________________________________________________________ 11.3.65. utmpx.h struct utmpx { short ut_type; pid_t ut_pid; char ut_line[UT_LINESIZE]; char ut_id[4]; char ut_user[UT_NAMESIZE]; char ut_host[UT_HOSTSIZE]; struct exit_status ut_exit; long int ut_session; struct timeval ut_tv; int32_t ut_addr_v6[4]; char __unused[20]; }; __________________________________________________________ 11.3.66. wctype.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.3.67. wordexp.h /* * This header is architecture neutral * Please refer to the generic specification for details */ __________________________________________________________ 11.4. Interfaces for libm Table 11-33 defines the library name and shared object name for the libm library Table 11-33. libm Definition Library: libm SONAME: libm.so.6 The behavior of the interfaces in this library is specified by the following specifications: [ISOC99] ISO C (1999) [LSB] ISO/IEC 23360 Part 1 [SUSv3] ISO POSIX (2003) [SVID.3] SVID Issue 3 __________________________________________________________ 11.4.1. Math __________________________________________________________ 11.4.1.1. Interfaces for Math An LSB conforming implementation shall provide the architecture specific functions for Math specified in Table 11-34, with the full mandatory functionality as described in the referenced underlying specification. Table 11-34. libm - Math Function Interfaces __finite(GLIBC_2.1) [LSB] __finitef(GLIBC_2.1) [LSB] __finitel(GLIBC_2.1) [LSB] __fpclassify(GLIBC_2.1) [LSB] __fpclassifyf(GLIBC_2.1) [LSB] __fpclassifyl(GLIBC_2.1) [LSB] __signbit(GLIBC_2.1) [LSB] __signbitf(GLIBC_2.1) [LSB] __signbitl(GLIBC_2.1) [ISOC99] acos(GLIBC_2.0) [SUSv3] acosf(GLIBC_2.0) [SUSv3] acosh(GLIBC_2.0) [SUSv3] acoshf(GLIBC_2.0) [SUSv3] acoshl(GLIBC_2.0) [SUSv3] acosl(GLIBC_2.0) [SUSv3] asin(GLIBC_2.0) [SUSv3] asinf(GLIBC_2.0) [SUSv3] asinh(GLIBC_2.0) [SUSv3] asinhf(GLIBC_2.0) [SUSv3] asinhl(GLIBC_2.0) [SUSv3] asinl(GLIBC_2.0) [SUSv3] atan(GLIBC_2.0) [SUSv3] atan2(GLIBC_2.0) [SUSv3] atan2f(GLIBC_2.0) [SUSv3] atan2l(GLIBC_2.0) [SUSv3] atanf(GLIBC_2.0) [SUSv3] atanh(GLIBC_2.0) [SUSv3] atanhf(GLIBC_2.0) [SUSv3] atanhl(GLIBC_2.0) [SUSv3] atanl(GLIBC_2.0) [SUSv3] cabs(GLIBC_2.1) [SUSv3] cabsf(GLIBC_2.1) [SUSv3] cabsl(GLIBC_2.1) [SUSv3] cacos(GLIBC_2.1) [SUSv3] cacosf(GLIBC_2.1) [SUSv3] cacosh(GLIBC_2.1) [SUSv3] cacoshf(GLIBC_2.1) [SUSv3] cacoshl(GLIBC_2.1) [SUSv3] cacosl(GLIBC_2.1) [SUSv3] carg(GLIBC_2.1) [SUSv3] cargf(GLIBC_2.1) [SUSv3] cargl(GLIBC_2.1) [SUSv3] casin(GLIBC_2.1) [SUSv3] casinf(GLIBC_2.1) [SUSv3] casinh(GLIBC_2.1) [SUSv3] casinhf(GLIBC_2.1) [SUSv3] casinhl(GLIBC_2.1) [SUSv3] casinl(GLIBC_2.1) [SUSv3] catan(GLIBC_2.1) [SUSv3] catanf(GLIBC_2.1) [SUSv3] catanh(GLIBC_2.1) [SUSv3] catanhf(GLIBC_2.1) [SUSv3] catanhl(GLIBC_2.1) [SUSv3] catanl(GLIBC_2.1) [SUSv3] cbrt(GLIBC_2.0) [SUSv3] cbrtf(GLIBC_2.0) [SUSv3] cbrtl(GLIBC_2.0) [SUSv3] ccos(GLIBC_2.1) [SUSv3] ccosf(GLIBC_2.1) [SUSv3] ccosh(GLIBC_2.1) [SUSv3] ccoshf(GLIBC_2.1) [SUSv3] ccoshl(GLIBC_2.1) [SUSv3] ccosl(GLIBC_2.1) [SUSv3] ceil(GLIBC_2.0) [SUSv3] ceilf(GLIBC_2.0) [SUSv3] ceill(GLIBC_2.0) [SUSv3] cexp(GLIBC_2.1) [SUSv3] cexpf(GLIBC_2.1) [SUSv3] cexpl(GLIBC_2.1) [SUSv3] cimag(GLIBC_2.1) [SUSv3] cimagf(GLIBC_2.1) [SUSv3] cimagl(GLIBC_2.1) [SUSv3] clog(GLIBC_2.1) [SUSv3] clog10(GLIBC_2.1) [LSB] clog10f(GLIBC_2.1) [LSB] clog10l(GLIBC_2.1) [LSB] clogf(GLIBC_2.1) [SUSv3] clogl(GLIBC_2.1) [SUSv3] conj(GLIBC_2.1) [SUSv3] conjf(GLIBC_2.1) [SUSv3] conjl(GLIBC_2.1) [SUSv3] copysign(GLIBC_2.0) [SUSv3] copysignf(GLIBC_2.0) [SUSv3] copysignl(GLIBC_2.0) [SUSv3] cos(GLIBC_2.0) [SUSv3] cosf(GLIBC_2.0) [SUSv3] cosh(GLIBC_2.0) [SUSv3] coshf(GLIBC_2.0) [SUSv3] coshl(GLIBC_2.0) [SUSv3] cosl(GLIBC_2.0) [SUSv3] cpow(GLIBC_2.1) [SUSv3] cpowf(GLIBC_2.1) [SUSv3] cpowl(GLIBC_2.1) [SUSv3] cproj(GLIBC_2.1) [SUSv3] cprojf(GLIBC_2.1) [SUSv3] cprojl(GLIBC_2.1) [SUSv3] creal(GLIBC_2.1) [SUSv3] crealf(GLIBC_2.1) [SUSv3] creall(GLIBC_2.1) [SUSv3] csin(GLIBC_2.1) [SUSv3] csinf(GLIBC_2.1) [SUSv3] csinh(GLIBC_2.1) [SUSv3] csinhf(GLIBC_2.1) [SUSv3] csinhl(GLIBC_2.1) [SUSv3] csinl(GLIBC_2.1) [SUSv3] csqrt(GLIBC_2.1) [SUSv3] csqrtf(GLIBC_2.1) [SUSv3] csqrtl(GLIBC_2.1) [SUSv3] ctan(GLIBC_2.1) [SUSv3] ctanf(GLIBC_2.1) [SUSv3] ctanh(GLIBC_2.1) [SUSv3] ctanhf(GLIBC_2.1) [SUSv3] ctanhl(GLIBC_2.1) [SUSv3] ctanl(GLIBC_2.1) [SUSv3] drem(GLIBC_2.0) [LSB] dremf(GLIBC_2.0) [LSB] dreml(GLIBC_2.0) [LSB] erf(GLIBC_2.0) [SUSv3] erfc(GLIBC_2.0) [SUSv3] erfcf(GLIBC_2.0) [SUSv3] erfcl(GLIBC_2.0) [SUSv3] erff(GLIBC_2.0) [SUSv3] erfl(GLIBC_2.0) [SUSv3] exp(GLIBC_2.0) [SUSv3] exp10(GLIBC_2.1) [LSB] exp10f(GLIBC_2.1) [LSB] exp10l(GLIBC_2.1) [LSB] exp2(GLIBC_2.1) [SUSv3] exp2f(GLIBC_2.1) [SUSv3] exp2l(GLIBC_2.1) [SUSv3] expf(GLIBC_2.0) [SUSv3] expl(GLIBC_2.0) [SUSv3] expm1(GLIBC_2.0) [SUSv3] expm1f(GLIBC_2.0) [SUSv3] expm1l(GLIBC_2.0) [SUSv3] fabs(GLIBC_2.0) [SUSv3] fabsf(GLIBC_2.0) [SUSv3] fabsl(GLIBC_2.0) [SUSv3] fdim(GLIBC_2.1) [SUSv3] fdimf(GLIBC_2.1) [SUSv3] fdiml(GLIBC_2.1) [SUSv3] feclearexcept(GLIBC_2.2) [SUSv3] fedisableexcept(GLIBC_2.2) [LSB] feenableexcept(GLIBC_2.2) [LSB] fegetenv(GLIBC_2.2) [SUSv3] fegetexcept(GLIBC_2.2) [LSB] fegetexceptflag(GLIBC_2.2) [SUSv3] fegetround(GLIBC_2.1) [SUSv3] feholdexcept(GLIBC_2.1) [SUSv3] feraiseexcept(GLIBC_2.2) [SUSv3] fesetenv(GLIBC_2.2) [SUSv3] fesetexceptflag(GLIBC_2.2) [SUSv3] fesetround(GLIBC_2.1) [SUSv3] fetestexcept(GLIBC_2.1) [SUSv3] feupdateenv(GLIBC_2.2) [SUSv3] finite(GLIBC_2.0) [LSB] finitef(GLIBC_2.0) [LSB] finitel(GLIBC_2.0) [LSB] floor(GLIBC_2.0) [SUSv3] floorf(GLIBC_2.0) [SUSv3] floorl(GLIBC_2.0) [SUSv3] fma(GLIBC_2.1) [SUSv3] fmaf(GLIBC_2.1) [SUSv3] fmal(GLIBC_2.1) [SUSv3] fmax(GLIBC_2.1) [SUSv3] fmaxf(GLIBC_2.1) [SUSv3] fmaxl(GLIBC_2.1) [SUSv3] fmin(GLIBC_2.1) [SUSv3] fminf(GLIBC_2.1) [SUSv3] fminl(GLIBC_2.1) [SUSv3] fmod(GLIBC_2.0) [SUSv3] fmodf(GLIBC_2.0) [SUSv3] fmodl(GLIBC_2.0) [SUSv3] frexp(GLIBC_2.0) [SUSv3] frexpf(GLIBC_2.0) [SUSv3] frexpl(GLIBC_2.0) [SUSv3] gamma(GLIBC_2.0) [LSB] gammaf(GLIBC_2.0) [LSB] gammal(GLIBC_2.0) [LSB] hypot(GLIBC_2.0) [SUSv3] hypotf(GLIBC_2.0) [SUSv3] hypotl(GLIBC_2.0) [SUSv3] ilogb(GLIBC_2.0) [SUSv3] ilogbf(GLIBC_2.0) [SUSv3] ilogbl(GLIBC_2.0) [SUSv3] j0(GLIBC_2.0) [SUSv3] j0f(GLIBC_2.0) [LSB] j0l(GLIBC_2.0) [LSB] j1(GLIBC_2.0) [SUSv3] j1f(GLIBC_2.0) [LSB] j1l(GLIBC_2.0) [LSB] jn(GLIBC_2.0) [SUSv3] jnf(GLIBC_2.0) [LSB] jnl(GLIBC_2.0) [LSB] ldexp(GLIBC_2.0) [SUSv3] ldexpf(GLIBC_2.0) [SUSv3] ldexpl(GLIBC_2.0) [SUSv3] lgamma(GLIBC_2.0) [SUSv3] lgamma_r(GLIBC_2.0) [LSB] lgammaf(GLIBC_2.0) [SUSv3] lgammaf_r(GLIBC_2.0) [LSB] lgammal(GLIBC_2.0) [SUSv3] lgammal_r(GLIBC_2.0) [LSB] llrint(GLIBC_2.1) [SUSv3] llrintf(GLIBC_2.1) [SUSv3] llrintl(GLIBC_2.1) [SUSv3] llround(GLIBC_2.1) [SUSv3] llroundf(GLIBC_2.1) [SUSv3] llroundl(GLIBC_2.1) [SUSv3] log(GLIBC_2.0) [SUSv3] log10(GLIBC_2.0) [SUSv3] log10f(GLIBC_2.0) [SUSv3] log10l(GLIBC_2.0) [SUSv3] log1p(GLIBC_2.0) [SUSv3] log1pf(GLIBC_2.0) [SUSv3] log1pl(GLIBC_2.0) [SUSv3] log2(GLIBC_2.1) [SUSv3] log2f(GLIBC_2.1) [SUSv3] log2l(GLIBC_2.1) [SUSv3] logb(GLIBC_2.0) [SUSv3] logbf(GLIBC_2.0) [SUSv3] logbl(GLIBC_2.0) [SUSv3] logf(GLIBC_2.0) [SUSv3] logl(GLIBC_2.0) [SUSv3] lrint(GLIBC_2.1) [SUSv3] lrintf(GLIBC_2.1) [SUSv3] lrintl(GLIBC_2.1) [SUSv3] lround(GLIBC_2.1) [SUSv3] lroundf(GLIBC_2.1) [SUSv3] lroundl(GLIBC_2.1) [SUSv3] matherr(GLIBC_2.0) [SVID.3] modf(GLIBC_2.0) [SUSv3] modff(GLIBC_2.0) [SUSv3] modfl(GLIBC_2.0) [SUSv3] nan(GLIBC_2.1) [SUSv3] nanf(GLIBC_2.1) [SUSv3] nanl(GLIBC_2.1) [SUSv3] nearbyint(GLIBC_2.1) [SUSv3] nearbyintf(GLIBC_2.1) [SUSv3] nearbyintl(GLIBC_2.1) [SUSv3] nextafter(GLIBC_2.0) [SUSv3